Nokia 6086 User Guide 9251039 Issue 1
DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this RM-188 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/ phones/declaration_of_conformity/. The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product endof-life.
Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice. Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused. The contents of this document are provided "as is".
Contents Contents For your safety.......................... 6 General information................. 9 Access codes............................................ 9 Copyright protection.......................... 10 Configuration settings service ........ 10 Download content and applications .......................................... 11 Nokia support and contact information........................................... 11 1. Get started ......................... 12 SIM card and battery installation ..
Contents Restore factory settings..................... 72 Phone software updates.................... 72 9. Operator menu ................... 74 10. Gallery.............................. 75 Format memory card .......................... 75 11. Media ............................... 76 Camera ................................................... Media player ......................................... Music player.......................................... Radio ...................................................
For your safety For your safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.
For your safety WATER-RESISTANCE Your phone is not water-resistant. Keep it dry. BACKUP COPIES Remember to make back-up copies or keep a written record of all important information stored in your phone. CONNECTING TO OTHER DEVICES When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products. EMERGENCY CALLS Ensure the phone is switched on and in service.
For your safety device may also have been specially configured. This configuration may include changes in menu names, menu order, and icons. Contact your service provider for more information. This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device, such as MMS, browsing, e-mail application, instant messaging, remote synchronization, and content downloading using the browser or MMS, require network support for these technologies.
General information General information Congratulations on your purchase of this Nokia mobile phone. Some of its other features include a calendar, a clock, an alarm clock, a radio, a music player, and a built-in camera. ■ Access codes Security code The security code (5 to 10 digits) helps to protect your phone against unauthorized use. The preset code is 12345. To change the code, and to set the phone to request the code, see “Security,” p. 71.
General information PUK codes The personal unblocking key (PUK) code and the universal personal unblocking key (UPUK) code (eight digits) is required to change a blocked PIN code and UPIN code, respectively. The PUK2 code is required to change a blocked PIN2 code. If the codes are not supplied with the SIM card, contact your service provider for the codes. Barring password The barring password (four digits) is required when using Call barring service. See “Security,” p. 71.
General information default configuration settings. Otherwise, the phone asks, Activate saved configuration settings? To discard the received settings, select Show > Discard. To edit the settings, see “Configuration,” p. 70. ■ Download content and applications You may be able to download content, such as themes, tones, and video clips, to the phone (network service). Select the download function (for example, in the Gallery menu). To access the download function, see the respective menu descriptions.
Get started 1. Get started ■ SIM card and battery installation Always switch the device off, and disconnect the charger before removing the battery. Keep all SIM cards out of the reach of small children. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor. The SIM card and its contacts can easily be damaged by scratches or bending, so be careful when handling, inserting, or removing the card.
Get started 6. Replace the battery, by positioning it (with the label side facing up), so the gold-colored contacts match up with those on the phone. Slide the battery in until it snaps into place. 7. Slide the back cover until it locks into place. ■ Charge the battery 1. Connect the charger to a standard wall outlet. 2. Insert the charger plug into the round jack in the bottom of the phone.
Get started Important: Do not remove the memory card in the middle of an operation when the card is being accessed. Removing the card in the middle of an operation may damage the memory card as well as the device, and data stored on the card may be corrupted. To insert a memory card, use a fingernail as a lever, place it in the recessed area of the memory card holder and swing the holder open (1). Place the memory card in the card holder (2).
Get started Connect to service provider support in “Configuration,” p. 70 and “Configuration settings service,” p. 10. ■ Open the fold When you open the fold of the phone, it opens up to approximately 155 degrees. Do not try to force the fold open more. ■ Normal operating position Use the phone only in its normal operating position. Your device has an internal antenna.
Get started Note: As with any other radio transmitting device, do not touch the antenna unnecessarily when the device is switched on. Contact with the antenna affects call quality and may cause the device to operate at a higher power level than otherwise needed. Avoiding contact with the antenna area when operating the device optimizes the antenna performance and the battery life. ■ Wrist strap Remove the back cover from the phone and thread a strap as shown in the picture.
Your phone 2.
Your phone ■ Standby mode When you turn on your phone, the first screen that appears is the start screen, which indicates your phone is in the standby mode. When your phone is in the standby mode, the selection keys access specific functions, and the indicators appear on the start screen. Indicators show the status of the phone. • Network signal strength (1) • Battery strength indicator (2) • Clock (3) — if the time is set to appear on the display. See “Time and date,” in “Settings,” p. 56.
Your phone Active standby mode In the active standby mode, the phone can display separate content item windows, such as general indicators and operator logo (1), shortcuts (2), audio functions (3), and the calendar (4). To select whether the active standby is shown, see Active standby in “Standby mode settings,” p. 54. The active standby is in passive mode when the middle selection key (5) is Menu; you can only view content.
Your phone Countdown timer — To start the countdown timer, select the content item. The remaining time with a note is shown. General indicators — To show standby indicators, such as date, cell info display, info messages, PTT default group name, and closed user group index. The date is shown if the calendar is not selected as active standby content. Standby mode shortcuts To access the list of dialed numbers, press the call key once. See “Make a call,” p. 23.
Your phone The phone registered a missed call. You have received one or several instant messages, and you are connected to the instant messaging service. The keypad is locked. The alarm clock is set to On. The phone does not ring for an incoming call or text message. The countdown timer is running. The stopwatch is running in the background. / The phone is registered to the GPRS or EGPRS network. / A GPRS or EGPRS connection is established.
Your phone • To enable automatic keyguard, select Menu >Settings > Phone > Automatic keyguard > On. Set the delay in minutes and seconds in which the keypad locks. If the Security keyguard is set to On, enter the security code if requested. To answer a call when the keyguard is on, press the call key. When you end or reject the call, the keypad is automatically locked. When the keyguard is on, calls still may be possible to the official emergency number programmed into your device.
Call functions 3. Call functions ■ Make a call 1. Enter the phone number, including the area code. To delete an incorrect character, select Clear. For international calls, press * twice for the international prefix (the + character replaces the international access code); and then enter the country code, the area code without the leading 0, if necessary, and the phone number. 2. To call the number, press the call key. 3.
Call functions Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances. 1. In the standby mode, press and hold the right selection key. A short tone is played, and Speak now is displayed. If you are using a compatible headset with the headset key, press and hold the headset key to start the voice dialing. 2. Say the voice command clearly.
Call functions ■ Options during a call Many of the options that you can use during a call are network services. For availability, contact your service provider. To increase or decrease the volume during a call, press the volume up or down key on the side of the phone. Select Options during a call and the following options may be available.
Phone menus 4. Phone menus Phone features are grouped according to function and are accessed through the main menus of your phone. Each main menu contains submenus and lists from which you can select or view items and personalize phone features. Scroll to access these menus and submenus. Some menus may not be available, depending on your network. For more information, contact your service provider. ■ Menu views Your phone may have two types of menu views: List and Grid.
Messaging 5. Messaging You can use mobile messages to keep in touch with friends, family, and business associates by using the short message service (SMS), which is a network service. Not all messaging features are available in all wireless networks. Contact your service provider for availability and subscription information. When sending messages, your phone may display the words Message sent.
Messaging When you write text, appears at the top left of the display, indicating predictive text input, and is displayed, indicating traditional text input. , , or is displayed next to the text input indicator, indicating the character case. To change the character case, press #. indicates number mode. To change from the letter to number mode, press and hold #, and select Number mode. Settings To set the writing language to a language other than that selected, select Options > Writing language.
Messaging If the next letter you want is located on the same key as the present one, wait until the cursor is displayed, or scroll and enter the letter. To access the most common punctuation marks and special characters, press 1. To insert a space, press 0. If you want more characters, press *. Write and send 1. Select Menu > Messaging > Create message > Text message and enter the recipient’s phone number in the To: field. 2. To retrieve a phone number from Contacts, select Add > Contact.
Messaging also copy text from the beginning of the message to your phone calendar as a reminder note. 3. To reply to a message, select Reply > Text message, Multimedia, Flash message, or Audio message. To send a text message to an e-mail address, enter the e-mail address in the To: field. 4. Scroll down and enter a message in the Message: field. See “Text entry,” p. 27. If you want to change the message type for your reply message, select Options > Change msg. type. 5. To send the message, select Send.
Messaging Write and send a multimedia message The wireless network may limit the size of MMS messages. If the inserted picture exceeds this limit, the device may make it smaller so that it can be sent by MMS. To set the settings for multimedia messaging, see “Multimedia,” p. 45. To check availability and to subscribe to the MMS, contact your service provider. 1. Select Menu > Messaging > Create message > Multimedia. 2. Enter a message. See “Text entry,” p. 27.
Messaging When the phone is sending the message, the animated is shown. Actual receipt of a message depends on a number of factors. For more details about messaging services, check with your service provider. It takes more time to send a multimedia message than to send a text message. While the message is being sent, you can use other functions on the phone. If an interruption occurs while the message is being sent, the phone tries to resend the message a few times.
Messaging Memory full When you are receiving a message, and the memory for the messages is full, Memory full. Unable to receive msgs. is shown. To delete old messages, select OK > Yes and the folder. Scroll to the message you want, and select Delete. If you want to delete more than one message at the same time, scroll to one of the messages you want to delete and select Options > Mark.
Messaging Write a flash message Select Menu > Messaging > Create message > Flash message. Enter the recipient’s phone number in the To: field. Write your message in the Message: field. The maximum length of a flash message is 70 characters. To send the message, select Send. Receive a flash message A received flash message is indicated with Message:, followed by a few words from the beginning of the message. To read the message, select Read.
Messaging Receive an audio message When your phone receives audio messages, either 1 audio message received, or N messages received is displayed, where N is the number of new messages. To open the message, select Play; or if more than one message is received, select Show > Play. To listen to the message later, select Exit. Select Options to see the available options. ■ Instant messaging You can take text messaging to the next level by experiencing IM (network service) in a wireless environment.
Messaging choice. For more information about signing up for IM services, contact your wireless service provider. Access To access the Instant messages menu while still offline, select Menu > Messaging > Instant messages (Instant messages may be replaced by another term depending on the service provider). If more than one set of connection settings for IM service is available, select the one you want. If there is only one set defined, it is selected automatically.
Messaging folder highlight it and select Expand (or press scroll right), to collapse the folder select Collapse (or press scroll left). Conversations — shows the list of new and read instant messages or invitations to IM during the active IM session indicates a new group message. indicates a read group message. indicates a new instant message. indicates a read instant message. indicates an invitation. The icons and texts on the display may vary, depending on the IM service you have selected.
Messaging Read an instant message In the standby mode, when you are connected to the IM service, and you receive a new message that is not a message associated with an active conversation, New instant message is displayed.To read it, select Read. If you receive more than one message, N new instant messages appears in the display, where N is the number of new messages. Select Read, scroll to a message, and select Open.
Messaging To block messages from a specific contact in your contacts list, scroll to the contact in Conversations, Online or Offline and select Options > Block contact > OK. To unblock a contact, in the IM main menu select Options > Blocked list. Scroll to the contact you want to unblock and select Unblock > OK. Groups You can create your own private groups for an IM conversation. The private groups exist only during an IM conversation.
Messaging To edit the e-mail settings, select Menu > Messaging > E-mail > Options > Manage accounts. This application does not support keypad tones. Settings wizard The settings wizard will start automatically if no e-mail settings are defined in the phone. To enter the settings manually, select Menu > Messaging > E-mail > Options > Manage accounts > Options > New. The Manage accounts options allow you to add, delete, and change the e-mail settings.
Messaging To send the saved e-mail from the outbox, select Menu > Messaging > E-mail > Options > Send e-mail or Send/check e-mail. Download e-mail 1. To download e-mail messages that have been sent to your e-mail account, select Menu > Messaging > E-mail > Check new e-mail. If more than one e-mail account is defined, select the account from which you want to download the e-mail. The e-mail application only downloads e-mail headers at first. 2. Select Back. 3.
Messaging e-mail is stored. The Outboxes folder contains the following folders: Drafts for saving unfinished e-mail, Outbox for saving e-mail that has not been sent, and Sent items for saving e-mail that has been sent. To manage the folders and their e-mail content, select Options to view the available options of each folder. Spam filter The e-mail application allows you to activate a built-in spam filter.
Messaging ■ Service commands Use the Service commands editor to enter and send service requests (also known as USSD commands) to your service provider. Contact your service provider for information about specific service commands. Select Menu > Messaging > Service commands. ■ Delete messages To delete messages one by one, select Menu > Messaging > Delete messages > By message and the folder from which you want to delete messages. Scroll to the message you want to delete, and select Delete.
Messaging Save sent messages > Yes — to set the phone to save the sent messages in the Sent items folder Overwriting in Sent items — to select if overwriting takes place when messages are sent and the message memory is full Font size — to select the font size used in messages Graphical smileys > Yes — to set the phone to replace character-based smileys with graphical ones Text messages The text message settings affect the sending, receiving, and viewing of text and SMS e-mail messages.
Messaging you can check how the message will look to the recipient by previewing the message. See “Write and send,” p. 29. Reply via same centre > Yes — to allow the recipient of your message to send you a reply using your message center (network service) Multimedia The multimedia message settings affect the sending, receiving, and viewing of multimedia messages and audio messages. You may receive the configuration settings for multimedia messaging as a configuration message.
Messaging Default, or Personal config. for multimedia messaging. Select Account and a MMS account contained in the active configuration settings. E-mail messages The settings affect the sending, receiving, and viewing of e-mail. You may receive the settings as a configuration message. See “Configuration settings service,” p. 10. You can also enter the settings manually. See “Configuration,” p. 70.
Contacts 6. Contacts In Contacts, you can store and manage contact information, such as names, phone numbers, and addresses. You can save names and numbers in the internal memory of the phone, the SIM card memory, or in a combination of the two. Names and numbers saved in the SIM card memory, are indicated by . ■ Search Select Menu > Contacts > Names and scroll through the list of contacts or enter the first letter of the name you are trying to find.
Contacts 5. To change the number type, scroll to the number you want, and select Options > Change type. To set the selected number as the default number, select Set as default. 6. Enter the number or text item; to save it, select Save. 7. To return to the standby mode, select Back > Exit. ■ Copy a contact Search for the contact you want to copy, and select Options > Copy contact. You can copy names and phone numbers from the phone contact memory to the SIM card memory, or vice versa.
Contacts ■ Business cards You can send and receive a person’s contact information from a compatible device that supports the vCard standard as a business card. To send a business card, search for the contact whose information you want to send, and select Details > Options > Send bus. card > Via multimedia, Via text message, or Via Bluetooth. When you have received a business card, select Show > Save to save the business card in the phone memory. To discard the business card, select Exit > Yes.
Contacts Select Assign, or if a number has already been assigned to the key, select Options > Change. Select Search and the contact you want to assign. If the Speed dialling function is off, the phone asks whether you want to activate it. To make a call using speed dialing, see “Speed dialing,” p. 23.
Call log 7. Call log The phone registers the phone numbers of identified missed, received, and dialed calls, and the approximate length of your calls. The phone registers missed and received calls only if the network supports these functions, and the phone is turned on and within the network’s service area. To view the information on your calls, select Menu > Log > Missed calls, Received calls, or Dialled numbers.
Call log phone displays 1 missed position request. To view the missed location request, select Show. To view the information on the 10 most recent privacy notifications and requests or to delete them, select Menu > Log > Positioning > Position log > Open folder or Delete all.
Settings 8. Settings Use this menu to set or change your profiles, themes, personal shortcuts, time and date settings, connectivity settings, call settings, phone settings, main display settings, mini display settings, tone settings, enhancement settings, configuration settings, security settings, and to restore factory settings. ■ Profiles Your phone has various setting groups, called profiles, for which you can personalize the phone tones for different events and environments.
Settings ■ Tones You can change the settings of the selected active profile. Select Menu > Settings > Tones. and edit the available settings. You can find the same settings when you personalize a profile in the Profiles menu. See “Profiles,” p. 53. To set the phone to ring only upon calls from phone numbers that belong to a selected caller group, select Alert for:. Scroll to the caller group you want or All calls, and select Mark.
Settings Standby mode font colour — to select the color for the texts on the display in the standby mode Navigation key icons — to set the scroll key icons that are shown in the standby mode Fold animation — to select whether an animation is shown when you open and close the fold. The fold animation is only visible if it is supported by and selected from the active theme set in your phone. See “Themes,” on p. 53. Operator logo — to set your phone to display or hide the operator logo.
Settings Screen saver Select Menu > Settings > Mini display > Screen saver > Analogue clock or Digital clock . To enter the time after which the screen saver is activated, select Time-out. To activate the screen saver, select On.
Settings process, if you want to move another function. When you have completed rearranging the functions you want, select Done > Yes. Right selection key To set a specific function (from a predefined list) to the right selection key, select Menu > Settings > My shortcuts > Right selection key. This function can be used only if it is supported by your service provider. Navigation key This key allows you to scroll up, down, left, and right.
Settings Edit or Remove — to change or deactivate the voice command of the selected function Remove all — to deactivate voice commands to all functions in the voice commands list ■ Connectivity You can connect the phone to compatible devices, using Bluetooth wireless technology or USB data cable (CA-53) connection. You can also define the settings for EGPRS or GPRS dial-up connections.
Settings detect and connect to WLAN/Wi-Fi, the proper settings may already be configured in your phone. For more information, contact your service provider. If you move the device to another location within the wireless LAN and out of range of a WLAN/Wi-Fi access point, the roaming function can automatically connect your device to another access point that belongs to the same network.
Settings The phone searches for networks and when the network with the best signal strength is found, a message confirming network connection is displayed. If you have not saved the network, a message asks if you want to save it. Select Yes or No if you want to save the network or not. If no available networks can be found, No quick connect networks available is displayed. Available networks The list of available networks shows all the available networks to which you can connect.
Settings Saved networks The list of saved networks consists of all the networks you have saved. The name of the network and the connection setting is displayed. The networks are listed in order of priority and the network with the highest priority is automatically the first one where a connection attempt is made. 1. Select Menu > Settings > Connectivity > Wi-Fi > Saved networks. 2. Scroll to the network you want, and select Connect. 3.
Settings Add to saved networks You can also add a network to the saved networks list from the Wi-Fi menu. You can either manually enter a network, which must have a valid SSID, or select from the available networks. To save from available networks, do the following: 1. To save a network from the available networks, select Available networks. 2. If you have not connected to WLAN/Wi-Fi first, a message asks if you want to turn on WLAN/Wi-Fi first. Select Yes.
Settings Bluetooth wireless technology This device is compliant with Bluetooth Specification 2.0 supporting the following profiles: hands-free, headset, network access, object push profile, file transfer profile, dial-up networking profile, SIM access profile, serial port profile, service discovery application profile, personal area network profile, advanced audio distribution profile and audio video remote control profile.
Settings Settings To define how your phone is shown to other Bluetooth devices, select Menu > Settings > Connectivity > Bluetooth > My phone's visibility or My phone's name. Operating the phone in hidden mode is a safer way to avoid malicious software. Do not accept Bluetooth connectivity from sources you do not trust. Turn off the Bluetooth function as another alternative. This will not affect other functions of the phone. Connection Select Menu > Settings > Connectivity > Bluetooth.
Settings To define how to use the service, select Menu > Settings > Connectivity > Packet data > Packet data connection and one of the following options: When needed — to set the packet data registration and connection to established when an application using packet data needs it and closed when you end the application Always online — to set the phone to automatically register to an packet data network when you switch the phone on. or indicates that the GPRS or EGPRS service is available.
Settings when you use the phone without a SIM card, some functions appear dimmed in the menus and cannot be used. To synchronize with a remote internet server is not possible without a SIM card. To copy or synchronize data from your phone, the name of the device and the settings must be in the list of partners in transfer contacts. If you receive data from another compatible device, the partner is automatically added to the list, using the contact data from the other device.
Settings Synchronize from a server To use a remote internet server, you have to subscribe to a synchronization service. For more information and the settings required for this service, contact your service provider. You may receive the settings as a configuration message. See “Configuration settings service,” p. 10 and “Configuration,” p. 70. If you have saved data on the remote internet server, you can synchronize your phone by starting the synchronization from your phone.
Settings Call divert — to forward your incoming calls (network service). Call divert and call barring cannot be active at the same time. See Call barring service in “Security,” p. 71. Anykey answer > On — to answer an incoming call by briefly pressing any key, except the left and right selection keys, volume key, camera key, or the end key Answer when fold is opened > On — to set your phone to answer a call when you open the fold. If the setting is off, you must press the call key after you open the fold.
Settings Memory status — to view the free memory and the used memory for each function in the list Security keyguard — to set the phone to ask for the security code when you unlock the keyguard. Enter the security code, and select On. When the keyguard is on, calls still may be possible to the official emergency number programmed into your device. Automatic keyguard — to set the keypad to lock automatically. Choose On and the time-out to activate the keyguard, or Off to set the automatic keyguard off.
Settings Fold close handling — to select whether closing the fold causes the phone to go to the standby mode or to keep all running applications open. ■ Enhancements This menu is shown only if the phone is or has been connected to a compatible mobile enhancement, other than the charger. Select Menu > Settings > Enhancements. You can select an enhancement menu if the corresponding enhancement is or has been connected to the phone.
Settings Select Menu > Settings > Configuration and one of the following options: Default configuration settings — to view the service providers saved in the phone. Scroll to a service provider, and select Details to view the applications that the configuration settings of this service provider supports. To set the configuration settings of the service provider as default settings, select Options > Set as default. To delete configuration settings, select Delete.
Settings Call barring service — to restrict incoming calls to and outgoing calls from your phone (network service). A password is required. Fixed dialling — to restrict your outgoing calls to selected phone numbers, if this function is supported by your SIM card Closed user group — to specify a group of people whom you can call and who can call you (network service) Security level > Phone — The phone asks for the security code whenever a new SIM card is inserted into the phone.
Settings Warning: If you install a software update, you cannot use the device, even to make emergency calls, until the update is completed and the device is restarted. Be sure to back up data before accepting a FOTA update. Download Select Menu > Settings > Phone > Phone updates to request available phone software updates from your service provider. Select Current software details to display the current software version.
Operator menu 9. Operator menu Your service provider may have programmed an operator-specific menu into your phone. If this menu exists in your phone, its functions depend entirely upon the service provider. Contact your service provider for more information.
Gallery 10. Gallery In this menu, you can manage graphics, images, recordings, and tones. These files are arranged in folders. Your phone supports an activation key system to protect acquired content. Always check the delivery terms of any content and activation key before acquiring them, as they may be subject to a fee. The files stored in the Gallery use the memory capacity of the phone.
Media 11. Media ■ Camera You can take photos or record video clips with the built-in camera. The camera lens is on the front of the phone. The color display works as a viewfinder. Take a photo 1. Select Menu > Media > Camera > Capture; or press the camera key, and select Capture. The phone saves the photo in Gallery > Images, unless you set the phone to use the memory card to save photos. 2. To take another photo, select Back. 3. To zoom in or out, press the four-way navigation key up or down. 4.
Media Record a video clip Select Menu > Media > Camera > Options > Video > Record. To pause recording, select Pause; to resume recording, select Continue. To stop recording, select Stop. The phone saves the recording in Gallery > Video clips. To view the options, select Options. Camera settings Select Menu > Media > Camera > Options > Settings, and edit the available settings. Camera effects Select Menu > Media > Camera > Options > Effects and one of the available options.
Media ■ Music player Your phone includes a music player for listening to music tracks, recordings, or MP3, MP4, WMA (Windows Media Audio), AAC, AAC+, or eAAC+ sound files that you have transferred to the phone with the Nokia Music Manager application. Music files are automatically detected and added to the default track list. Play music tracks 1. Select Menu > Media > Music player. The details of the first track on the default track list are shown. 2. To play a track, scroll to the track, and select .
Media Add to Favourites — to add the current song to the Favourites track list Play via Bluetooth — to connect and play music through a bluetooth enabled audio accessory using bluetooth connection Use tone — to use the current song as a ring tone for example. You are presented a list of possible options for the tone. Send — to send the selected file using MMS or a bluetooth connection Web page — to connect to a browser service related to the current track.
Media Listen 1. Select Menu > Media > Radio. 2. To scroll to the channel you want, select headset key. or , or press the 3. To select a radio channel location, briefly press the corresponding number keys. 4. Select Options and one of the following options: Switch off — to turn off the radio Save station — to save a new channel by entering the channel’s name Visual Radio — to set whether the Visual Radio application is used (network service).
Media Enable visual serv. — To set whether the Visual Radio application starts automatically when you turn on the radio, select Enable visual serv. > Automatically. You can normally make a call or answer an incoming call while listening to the radio. During the call, the volume of the radio is muted. When an application using a packet data or HSCSD connection is sending or receiving data, it may interfere with the radio. ■ Recorder You can record pieces of speech, sound, or an active call.
Media Define a storage folder To use a folder other than Recordings as the default folder in Gallery, select Menu > Media > Recorder > Options > Select memory and a folder from the list. ■ Equalizer You can control the sound quality when using the music player by amplifying or attenuating frequency bands. 1. Select Menu > Media > Equaliser. 2. To activate a set, scroll to one of the equalizer sets, and select Activate. 3. To view, edit, or rename a selected set, select Options > View, Edit, or Rename.
Push to talk 12. Push to talk Push to talk (PTT) over cellular is a two-way radio service available over a GSM/GPRS cellular network (network service). PTT provides direct voice communication. To connect, press the volume up key. You can use PTT to have a conversation with one person or with a group of people having compatible devices. When your call is connected, the people you are calling do not have to answer the phone.
Push to talk ■ Make and receive a PTT call Set the phone to use the loudspeaker or earpiece for PTT communication. When the earpiece is selected, use the phone normally by holding it to your ear. Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. When connected to the PTT service, you can make or receive channel calls, group calls, or one-to-one calls. One-to-one calls are calls you make to only one person.
Push to talk To make a group call from Contacts, the recipients must be connected to the PTT service. Select Menu > Contacts > Groups, scroll to the group you want, and press the volume up key. Make a one-to-one call To start a one-to-one call from the list of contacts to which you added the PTT address, select Contacts list. Scroll to a contact, and press the volume up key. You can also select the contact from Contacts.
Push to talk ■ Callback requests If you make a one-to-one call and do not get a response, you can send a request for the person to call you back. Send a callback request You can send a callback request in the following ways: To send a callback request from the contacts list in the Push to talk menu, select Contacts list. Scroll to a contact, and select Options > Send PTT callback.
Push to talk ■ Add a one-to-one contact You can save the names of persons to whom you often make one-to-one calls in the following ways: To add a PTT address to a name in Contacts, search for the desired contact, and select Details > Options > Add detail > PTT address. To add a contact to the PTT contacts list, select Menu > Push to talk > Contacts list > Options > Add contact. To add a contact from the channel list, connect to the PTT service, select Channel list, and scroll to the channel you want.
Push to talk To add a provisioned channel, select Menu > Push to talk > Add channel > Options > Edit add. manually. Enter the channel address provided by your service provider. Receive an invitation When you receive a text message invitation to a group, Channel invitation received: is displayed. 1. To view the contact who sent the invitation and the channel address if the group is not a private channel, select View. 2. To add the channel to your phone, select Save. 3.
Push to talk The service provider may offer some services that override these settings. To set the phone to first notify you of incoming one-to-one calls with a ringing tone, select Notify.
Organizer 13. Organizer Your Nokia mobile phone has many useful features for organizing your everyday life. The following features are found in Organiser: alarm clock, calendar, to-do list, notes, calculator, timer, and stopwatch. ■ Alarm clock The alarm clock uses the time format set for the clock. The alarm clock works even when the phone is turned off if there is enough power in the battery. To set the alarm, select Menu > Organiser > Alarm clock > Alarm time, and enter the alarm time.
Organizer device or Yes to make and receive calls. Do not select Yes when wireless phone use may cause interference or danger. ■ Calendar The calendar helps you keep track of reminders, calls that you need to make, meetings, and birthdays. Select Menu > Organiser > Calendar. The current day is indicated by a frame in the month view. If there are any notes set for the day, the day is in bold type. To view the day notes, select View. To view a week, select Options > Week view.
Organizer ■ To-do list You can save a note for a task that you have to do, select a priority level for the note, and mark it as done when you have completed it. You can sort the notes by priority or by date. To-do notes 1. Select Menu > Organiser > To-do list. 2. If no note is added, select Add note; otherwise, select Options > Add. 3. Write the note, select the priority, set the deadline and the alarm type for the note, and select Save. 4. To view a note, scroll to it, and select View.
Organizer To save the exchange rate, select Options > Exchange rate. To perform the currency conversion, enter the amount to be converted, and select Options > In domestic or In foreign. ■ Timer 1. Select Menu > Organiser > Timer > Normal timer; enter the alarm time in hours, minutes, and seconds; and select OK. You can write your own note text, which will display when the time expires. 2. To start the timer, select Start. 3. To change the countdown time, select Change time. 4.
Applications 14. Applications ■ Games Your phone software includes some games. Launch Select Menu > Applications > Games, scroll to the game you want, and select Open. For options related to a game, see “Other application options,” p. 94. Downloads Select Menu > Applications > Options > Downloads > Game downloads. The list of available bookmarks is shown. Important: Only install and use applications and other software from sources that offer adequate security and protection against harmful software.
Applications Details — to give additional information about the application Update version — to check if a new version of the application is available for download from the Web (network service) App. access — to restrict the application from accessing the network. Different categories are shown. Select in each category one of the available permissions. Web page — to provide further information or additional data for the application from an internet page (network service).
Web 15. Web Your phone has a built-in browser you can use to connect to selected services on the mobile internet. Many wireless mobile internet access features are network-dependent, and some features may not be available. Contact your service provider for more information. ■ Technology background A technology called wireless application protocol (WAP) is to mobile devices what the world wide web (WWW) is to personal computers. Most WAP sites are made up of text and hyperlinks.
Web Activate the settings Ensure that the Web settings of the service you want to use are activated. 1. Select Menu > Web > Settings > Configuration settings > Configuration. Only the configurations that support the browsing service are shown. 2. Select a service provider or Personal config. for browsing. 3. Select Account and a browsing service account contained in the active configuration settings. 4.
Web If EGPRS or GPRS is selected as the data bearer, either or is shown in the top left of the display during browsing. If you receive a call or a text message, or make a call during an EGPRS or GPRS connection, or is shown in the top right of the display to indicate that the EGPRS or GPRS connection is suspended (on hold). After a call, the phone tries to reconnect the EGPRS or GPRS connection. Phone keys • To browse through the page, press the scroll key in any direction.
Web Alerts > Alert for unsecure items > Yes — to set the phone to alert when a encrypted page contains an unsecure item. These alerts do not guarantee a secure connection. For more information, see “Browser security,” p. 101. Character encoding > Content encoding — to select the encoding for the browser page content Character encoding > Unicode (UTF-8) web addresses > On — to set the phone to send a URL as a UTF-8 encoding. You may need this setting when you access a web page created in a foreign language.
Web 1. While browsing, select Options > Bookmarks; or in the standby mode, select Menu > Web > Bookmarks. 2. Scroll to a bookmark, and select it; or press the call key to make a connection to the page associated with the bookmark. 3. Select Options to view, edit, delete, or send the bookmark; create a new bookmark; or move the bookmark to a folder. Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites.
Web To set whether you want to receive service message, select Service messages > On or Off. To set the phone to receive service messages only from content authors approved by the service provider, select Message filter > On. To view the list of the approved content authors, select Trusted channels. To set the phone to automatically activate the browser from the standby mode when the phone has received a service message, select Automatic connection > On.
Web Select Menu > Settings > Security > Security module settings and one of the following options: Security module details — to show the security module title, manufacturer, and serial number Module PIN request — to set the phone to ask for the module PIN when using services provided by the security module. Enter the code, and select On. To disable the module PIN request, select Off. Change module PIN — to change the module PIN, if allowed by the security module.
Web The security indicator is displayed during a connection, if the data transmission between the phone and the content server is encrypted. The security icon does not indicate that the data transmission between the gateway and the content server (or place where the requested resource is stored) is secure. The service provider secures the data transmission between the gateway and the content server. Digital signature You can make digital signatures with your phone if your SIM card has a security module.
SIM services 16. SIM services Your SIM card may provide additional services that you can access. This menu is shown only if it is supported by your SIM card. The name and contents of the menu depend on the SIM card. For availability, rates, and information on using SIM services, contact your service provider. To access these services, it may be necessary to send messages or make a phone call for which you may be charged.
Computer connectivity 17. Computer connectivity You can send and receive e-mail, and access the internet when your phone is connected to a compatible PC through Bluetooth or USB data cable (CA-53) connection. You can use your phone with a variety of PC connectivity and data communications applications. ■ USB data storage You can use the USB data cable to transfer data between the memory card inserted in the phone and a compatible PC. See “USB data cable,” p. 67.
Computer connectivity ■ Data communication applications For information on using a data communication application, refer to the documentation provided with it. Making or answering phone calls during a computer connection is not recommended, as it might disrupt the operation. ■ Bluetooth Use Bluetooth technology to connect your compatible laptop to the internet. Your phone must have activated a service provider that supports internet access and your PC has to support Bluetooth PAN (Personal Area Network).
Enhancements 18. Enhancements If you want to enhance phone functionality, a range of enhancements is available for you. You can select any of these items to help accommodate your specific communication needs.
Battery information 19. Battery information ■ Charging and discharging Your device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery.
Battery information ■ Nokia battery authentication guidelines Always use original Nokia batteries for your safety. To check that you are getting an original Nokia battery, purchase it from an authorized Nokia dealer, look for the Nokia Original Enhancements logo on the packaging, and inspect the hologram label using the following steps: Successful completion of the four steps is not a total assurance of the authenticity of the battery.
Battery information 4. Confirm that the 20-digit code is valid by following the instructions at www.nokia.com/batterycheck. To create a text message enter the 20-digit code, for example, 12345678919876543210, and send to +44 7786 200276. National and international operator charges will apply. You should receive a message indicating whether the code can be authenticated.
Care and maintenance Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery and allow the device to dry completely before replacing it.
Additional safety information Additional safety information Your device and its enhancements may contain small parts. Keep them out of the reach of small children. ■ Operating environment Remember to follow any special regulations in force in any area, and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions.
Additional safety information • Always keep the device more than 15.3 centimeters (6 inches) from the pacemaker • Not carry the device in a breast pocket • Hold the device to the ear opposite the pacemaker to minimize the potential for interference. If you suspect interference, switch off your device, and move the device away. Hearing aids Some digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider.
Additional safety information depots, storage, and distribution areas; chemical plants; or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), and areas where the air contains chemicals or particles such as grain, dust, or metal powders.
Additional safety information The exposure guidelines for mobile devices employ a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit stated in the ICNIRP guidelines is 2.0 watts/kilogram (W/kg) averaged over 10 grams of tissue. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands.
Index Index A D access codes 9 active standby 19, 57 alarm clock 90 antenna 15 dialing 23 downloads content and applications 11 settings 100 B E battery charge 13 strength indicator 18 bluetooth 63 bookmarks 99 browser 97 business cards 49 e-mail application 39 emergency calls 114 enhancements 107 C calculator 92 calendar 91 call answer 24 end 23 log 51 make 23 options 25 reject 24 voice mail 42 waiting 24 camera lens 17 use 76 contacts add 47 copy 48 delete 48 delete details 48 edit 48 memory in u
Index Nokia PC Suite 105 notes 92 O operator logo 55 operator menu 74 P phone software updates 72 plug and play service 14 profiles 53 PTT. See push to talk.
