User Guide

• Set Active unit to “Tx” (Default = “Rx”).

• Set Operation mode to “Burst” (Default = “Burst”).

• Set Tx data type to “Random” (Default = “All1”).

• Set Rx/Tx channel to 190 on GSM850, 37 on GSM900 band or 700 on GSM1800 band or 661 on GSM1900

(Defaults).

• Set Edge to “Off” (Default).

• Set Tx PA mode to “Free” (Default).

• Set power level to 5 (Default = 19) on GSM850/900 or to 0 (Default = 15) on GSM1800 or GSM1900.

Figure 50 RF Controls window

RM-198

Nokia Customer Care RF Troubleshooting and Manual Tuning Guide

Page 7 –16 COMPANY CONFIDENTIAL Issue 1