User Guide

Table Of Contents
Settings
54
USB data cable
You can use the USB data cable to transfer data between the memory card
inserted in the phone and a compatible PC or a printer supporting PictBridge.
You can also use the USB data cable with Nokia PC Suite.
To activate the memory card for data transfer or picture printing, connect the
data cable; when the phone displays USB data cable connected. Select mode.,
select OK and one of the following options:
Nokia mode — to use the cable for Nokia PC Suite
Printing & media to print pictures directly from the phone by using a
compatible printer.
Data storage — to activate the memory card for data transfer
To change the USB mode, select Menu > Settings > Connectivity > USB data
cable > Nokia mode, Printing, or Data storage.
Call
Select Menu > Settings > Call and one of following options:
Call forwarding — to forward your incoming calls (network service). Call forwarding
and call restrictions cannot be active at the same time. See Call restrictions in
“Security,” p. 57.
Anykey answer > On to answer an incoming call by briefly pressing any key,
except the left and right selection keys, volume key, camera key, or the end key.
Answer when fold is opened > On — to set your phone to answer a call when you
open the fold. If the setting is off, you must press the call key after you open the fold.
Automatic redial > On — to set your phone to make a maximum of 10 attempts to
connect the call after an unsuccessful call attempt.
1-touch dialing > On — to dial the names and phone numbers assigned to the
1-touch dialing keys, 2 to 9. To dial, press and hold the corresponding number key.
Call waiting > Activate — to set the network to notify you of an incoming call
while you have a call in progress (network service). See “Call waiting,” p. 23.
Summary after call > On — to briefly display the approximate duration of the call
after each call.
Send my caller ID > Yes — to show your phone number to the person you are
calling (network service). To use the setting agreed upon with your service
provider, select Set by network.