User Guide
Table Of Contents
- 4 - Service Tools
- Service Tools
- List of service tools
- JVB-1 Docking Station with DA-16 Docking Station Adapter
- DA-16 Docking Station Adapter
- SA-25 Antenna Coupler
- SF-17 CCS POS Flash Adapter
- MJ-22 Module Repair Jig
- RJ-66 Soldering Jig
- ST-11 PA Rework Stencil
- Rework procedure
- RJ-46 Antenna Switch Rework Jig
- ST-15 / ST-31 Antenna Switch Solder Paste Stencil
- FPS-8 Flash Prommer
- FPS-10 Flash Prommer
- FPS-11 Multiprommer
- ACF-8 Universal Power Supply
- FLC-2 DC Cable
- AXS-4 Service Cable
- XCS-1 Service Cable
- SW Security Device PKD-1
- FLS-4S POS (Point Of Sale) Flash Device (Sales Pack)
- PCS-1 Power Cable
- CA-41 PS
- XRF-1 RF Cable
- DAU-9S MBUS Cable
- XCS-4 Modular Cable
- CA-5S Service Battery Cable
- CA-10DS Bi-directional Parallel Cable
- DAU-9T Service Cable
- Service Tools
- BACK TO MAIN PAGE
Issue 1 04/2005 COMPANY CONFIDENTIAL 7
Copyright © 2005 Nokia. All Rights Reserved.
RM-94
4 - Service Tools Nokia Customer Care
■ JVB-1 Docking Station with DA-16 Docking Station Adapter
The JVB-1 docking station has been designed for calibration and software update use. The DA-
16 docking station adapter makes signal connections to the phone. JVB-1 and DA-16 are used
as one unit.
JVB-1 main electrical functions include the following:
• adjustable VBATT calibration voltage, current measurement limit voltage
“VCHAR”, current measurement calibration “ICHAR”
• adjustable ADC calibration voltage via BTEMP and BSI signal
• BTEMP and BSI calibration resistor
• signals from FBUS to the phone via parallel jig
• control via FBUS or USB
• Flash OK/FAIL indication
In calibration mode JVB-1 is powered by external power supply 11-16V DC. In flashing power
for the phone can be taken from FPS-8 or external power supply 11-16V DC.