User Guide

Issue 1 04/2005 COMPANY CONFIDENTIAL 5

RM-94

5 - Disassembly/Reassembly Instructions Nokia Customer Care

Disassembly Instructions

■ General requirements

Use the correct ESD protection before handling the RM-94 product.

Use gloves to handle the RM-94 product.

Required tools:

• torx 6 screwdriver, for disassembly

• torx 6 torque-driver, set to 28Ncm torque for reassembly

• slotted screwdriver

• tweezers

• SRT-6 opening tool

• DC-plug

Note: When shielding lids are removed from the shielding frames of the PWB, new lids

must be used in order to close the shielding properly. It is not allowed to re-use the re-

moved ones.