User Guide

RM-94
Nokia Customer Care 6(b) - RF Troubleshooting
20 COMPANY CONFIDENTIAL Issue 1 04/2005
Copyright © 2005 Nokia. All Rights Reserved.
RX/TX Channel 37
TX Power Level 10
TX Data Type All1
Edge On
The setup should now look like this:
Now the measurement equipment should detect the following output signal of the phone:
P
out
= +24.5 dBm @ 897.4 MHz
If this is not the case, go to the EDGE fault finding chart for GSM900 transmitter.
Fault finding chart for GSM900 transmitter
In the following, it is assumed that the TXP signal is used as trigger signal. For that, a TXP test
point is provided.