User Guide

Issue 1 04/2005 COMPANY CONFIDENTIAL 19
Copyright © 2005 Nokia. All Rights Reserved.
RM-94
6(b) - RF Troubleshooting Nokia Customer Care
Operation mode Burst
RX/TX Channel 37
TX Power Level 10
TX Data Type Random
Edge Off
The setup should now look like this:
Now the measurement equipment should detect the following output signal of the phone:
P
out
= +23dBm @ 897.4 MHz
If this is not the case, go to the GMSK fault finding chart for the GSM900 transmitter.
EDGE
Set operating mode to local mode.
Select Testing RF Controls
Wait until the RF Controls window pops up.
Select Band GSM 900
Active unit TX
Operation mode Burst