User Guide

Issue 1 04/2005 COMPANY CONFIDENTIAL 65

RM-94

3 - Service Software and Tuning Instructions Nokia Customer Care

Edit the column <Loss/dB>.

Note: Jig and product are pre-defined.

GPIB interface

The GPIB card shall be labeled by National Instruments or at least compatible with their prod-

ucts.

Drivers must be installed and card <accepted> by Phoenix. The following procedure has to be

made once for <acceptance> :

Select Tools Alt-T

Options Alt-O

GPIB card Alt-G

The window <GPIB Card> pops up.

Select Card Type: NI

Press Start and wait until the <listeners> (radio communication tester) are identified, then

press Close.

The identification may take a few minutes.