User Guide
Table Of Contents
- INTRODUCTION
- GENERAL REPAIR INFORMATION
- PATHFINDER FOR WORKSHOP STAFF
- EXPLODED VIEW AND COMPONENT DISPOSAL
- SPARE PARTS OVERVIEW
- SPARE PARTS LIST
- SERVICE TOOLS
- SW-UPDATE
- DISASSEMBLY INSTRUCTIONS
- LEGEND FOR QUICK TROUBLE SHOOTER
- QUICK TROUBLE SHOOTER PART 1
- QUICK TROUBLE SHOOTER PART 2
- QUICK TROUBLE SHOOTER PART 3
- BLUETOOTH & INFRARED TEST
- GONOGO TEST
- BATTERY TEST
- FORWARDING OF REPAIRS
- ESD PROTECTION REQUIREMENTS
nokia
CONNECTING PEOPLE
PAGE 13 (22) Approved 1.0
CMO Operations & Logistics
MGR
WW Service Solutions & Development
Bochum / Germany CONFIDENTIAL 17.3.2005
9.) Carefully open the LCD connector. Do not to damage
the LCD connector.
10.) Remove UI Shield Assy with the LCD Module.
11.) Lever out the LCD Module from the UI Shield.
12.) Protect the LCD Module with a protective film.
13.) Separate the Light Guide Assy from the Engine
Module. Do not use the SRT-6 on the right side to avoid
damaging underneath components.
14.) Now, take away the Light Guide Assy.
15.) Remove the DC-Jack with a DC-Plug.
16.) Remove the Microphone with tweezers.
Service Manual 6021 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved.