User Guide

Issue 1 03/2005 COMPANY CONFIDENTIAL 5
Copyright © 2005 Nokia. All Rights Reserved.
RM-31
5 - Disassembly Instructions Nokia Customer Care
Disassembly Instructions
■ General requirements
Use the correct ESD protection before handling the RM-31 product.
Use gloves to handle the RM-31 product.
Required tools:
• torx 6 screwdriver, for disassembly
• torx 6 torque-driver, set to 28Ncm torque for reassembly
• slotted screwdriver
• tweezers
• SS-42 camera removal tool
• SRT-6 opening tool
• DC-plug
Note: When shielding lids are removed from the shielding frames of the PWB, new lids
must be used in order to close the shielding properly. It is not allowed to re-use the re-
moved ones.