User Guide

RM-31

Nokia Customer Care 5 - Disassembly Instructions

10 COMPANY CONFIDENTIAL Issue 1 03/2005

Note: It is not possible to disassemble the power actuator without damaging it. The power actu-

ator is the same material as B-cover.

Note: If a new B-cover is used, a torque setting of 28Ncm and speed in the range of 400 - 600

rpm is required to cut the new thread.

Caution: The display connector is fragile. Movement of the display module/UI shield assembly

can damage the solder joints of connector on the display module or phone PWB. Ensure it is

held in place during unscrewing and screwing.