Cell Phone User Guide

Table Of Contents

You can also plug a compatible headset into the 2.5mm headset jack on the side of your

phone to allow hands-free operation. (See Enhancements, 88 for information.)

■ Change the Xpress-on™ covers

Note: Before removing the cover, always switch off the power, and disconnect

the charger and any other device. Avoid touching electronic components while

changing the covers. Always store and use the device with the covers attached.

Remove the back cover

With the back of the phone facing you, push

down on the back cover release button, and slide

the back cover toward the bottom of the phone.

Remove the battery

After you have removed the back cover, insert

your finger into the finger grip, and lift the

battery from its compartment.

Remove the front cover

Gently pull the bottom of the front cover away from

the rest of the phone.

Install the keymat and front cover

1. Remove the keymat from the old front cover.