User Guide

6015/6015i/6016i/6019i (RH-55), 6012 (RM-20)

System Module Nokia Customer Care

hardware failure and hold the GE in reset. If download is successful, it will configure the

GE and then put the GE to sleep. Sleep is the normal state of the GE and the only time it

is woken up is from any of the following:

• To perform periodic self-test

• When an IS-801.1 location session starts

• When a command is sent to it through the test interface in the Location Server

SW in the CE, (e.g., a command from Phoenix)

During sleep of the GE, the RF regulator is off and the RF ASIC is powered down. The

baseband ASIC remains powered on, but has no internal clocks running except the sleep

clock from the CE.