User Guide

6015/6015i/6016i/6019i (RH-55), 6012 (RM-20)
Troubleshooting — Antenna Nokia Customer Care
Page 4 ©2004 Nokia Corporation Company Confidential Issue 1 - Revision 002 09/2004
Figure 1: Whip assembly
Internal Antenna
Following are the minimum acceptable visual quality requirements of the internal
antenna assembly:
• Gloves must be used when handling antennas. Do not touch the antenna radiator
with bare hands.
• No visual cracks or mechanical defects.
• No oil, dirt, or particles are present on the parts.
• Radiator must be aligned with the plastic housing.
• GPS antenna contacts must be inside the plastic housing.
• Radiator must be flat with no warping.
• All pins must be at the same level.
Cap
Telescopic tube
Wire
Plug
Bottom stopper