Nokia Customer Care 6015/6015i/6016i/6019i (RH-55), 6012 (RM-20) Series Transceivers Service Tools Issue 1 - Revision 002 09/2004 Company Confidential ©2004 Nokia Corporation
6015/6015i/6016i/6019i (RH-55), 6012 (RM-20) Service Tools Contents Nokia Customer Care Page Service Tools..................................................................................................................................................
6015/6015i/6016i/6019i (RH-55), 6012 (RM-20) Service Tools Nokia Customer Care Service Tools MJ-31 Service Jig SS-35 Upgrade Kit 0770772 0780410 The MJ-31 secures and allows easy access to critical areas of the handset’s PWB during troubleshooting. It supports regulated (to 5VDC) or unregulated DC input voltage, local and normal mode operations, headset jack for audio tests, and R-UIM card reader. There is a second DC input for VCHAR used in EM tuning.
6015/6015i/6016i/6019i (RH-55), 6012 (RM-20) Service Tools MJF-28 Docking Station Adapter Nokia Customer Care FLA-44 Flash-loading Adapter 0770484 0770483 The MJF-28 works in conjunction with the JBV-1 Docking Station and the FPS-8 Prommer to allow calibration and software flashing of the handset. The MUF-28 also has a built-in R-UIM card reader. The flash-loading adapter replaces the phone battery to provide continuous power to the handset.
6015/6015i/6016i/6019i (RH-55), 6012 (RM-20) Service Tools Nokia Customer Care FLS-4S Flashing Device FLC-20 Flashing Device 0080543 0081544 The FLS-4S allows Point of Sale (POS) locations to flash the handset and power the FLA-44. The FLS-4S works with the XCS-1 data cable (not included). The FLC-20 allows Point of Sale (POS) locations to flash the handset and power the FLA-44. This device allows bottom connector flashing. Note: Requires a CA-22DS service cable (not included).
015/6015i/6016i/6019i (RH-55), 6012 (RM-20) Service Tools XCS-4 Mbus/Fbus Cable Nokia Customer Care PKD-1 SW Security Device 0730178 0750018 The XCS-4 Service Cable is a general purpose cable for flashing and communicating with the phone. This is used to connect the FPS-8 box to the docking station adapter or the service jig. SW security device PKD-1 is hardware device that, when connected to the parallel (LPT) port of the PC, enables the use of the service software.
6015/6015i/6016i/6019i (RH-55), 6012 (RM-20) Service Tools Nokia Customer Care CA-5S DC Service Cable PCS-1 Power Cable 0730283 0730012 CA-5S is used for EM calibration with the JBV-1. The cable replaces the SCB-3 DC Cable (0730114). The Power Cable PCS-1 is used to connect the service tools (JBV-1, MJS-82) to an external power supply. Note: Required by the MJF-28 Docking Station Adapter.
6015/6015i/6016i/6019i (RH-55), 6012 (RM-20) Service Tools XRS-4 RF Test Cable Nokia Customer Care XRS-6 RF Cable 0730221 0730231 The XRS-4 is used in conjunction with the SS-16 test A-cover The XRS-6 Cable is used to connect service tools to RF measuring equipment. XRS-12 RF Test Cable JXS-1 Shield Box 0730274 0770346 The XRS-12 can be used for galvanic RF testing (cellular only). This is an optional tool. (The XRS-12 has a shorter RF probe than the XRS-4.
6015/6015i/6016i/6019i (RH-55), 6012 (RM-20) Service Tools Nokia Customer Care RJ-18 Power Amp LGA Rework Jig and ST-16 PA Stencil AAS-10A RF Probe 0730306 RJ-18 = 0770660; ST-16 = 0780407 The AAS-10A allows troubleshooting the handset. You can use the probe with the XRS-6 RF cable. The ST-16 stencil allows to rework LGA-type components that do not have pre-tinned pads. Both Power Amps (N801 and N802) require the use of this stencil.
6015/6015i/6016i/6019i (RH-55), 6012 (RM-20) Service Tools Nokia Customer Care This page intentionally left blank.
