User Guide

CONFIDENTIAL
9(11)
Product NPM-5 Repairhints
Customer Care Europa & Africa Introduction Version 1.0 Approved
 2002 SCCE Training Group
Date 08.04.2002
npm_5_repair_v1_0.doc Checked by:
SCCE Training Group
Approved by:
SCCE
Mechanical faults
B-cover damaged
Wrong connector assembling
B-cover damged
When assembling the B-cover with UI (MU4)- and CMT (MA4)- module often the screw holes from B-cover are damaged.
This is caused by wrong screw lengths at wrong place or wrong tightening. The screws must be tightened with a torque
of17Ncm.
Note! For right replacement of the screws, refer to chapter “Assembling instructions (screws)”
Wrong connector assembling
When assembling the connector J602 (stereo out) it is necessary to check the correct assembly. (See picture below)
Broken screw hole
Wrong
assembled
Correct