User Guide

ii In the

RF Controls

window:

• Select band “GSM900” or “GSM1800” or “GSM1900” (Default = “GSM900”).

• Set Active unit to “Tx” (Default = “Rx”).

• Set Operation mode to “Burst” (Default = “Burst”).

• Set Tx data type to “Random” (Default = “All1”).

• Set Rx/Tx channel to 37 on GSM900 band or 700 on GSM1800 band or 661 on GSM1900 (Defaults).

• Set Edge to “Off” (Default).

• Set Tx PA mode to “Free” (Default).

• Set power level to 5 (Default = 19) on GSM900 or to 0 (Default = 15) on GSM1800 or GSM1900.

Figure 50 RF Controls window

RM-86

RF Troubleshooting and Manual Tuning Guide Nokia Customer Care

Issue 1 COMPANY CONFIDENTIAL Page 7 –15