User Guide

• Set Rx/Tx channel to 37 on GSM900 band or 700 on GSM1800 band or 661 on GSM1900 (Defaults).

• Set Edge to “Off” (Default). (Not active in RXmode).

• Set Tx PA mode to “Free” (Default). (Not active in RXmode).

• Apply 942.46771 MHz (channel 37 + 67.710 kHz offset), 1842.86771 MHz (channel 700 + 67.710 kHz

offset) or 1960.06771 MHz (channel 661 + 67.71 kHz) –90 dBm signal to the RF-connector (remember

to compensate for cable attenuation).

Figure 48 RF Controls window

RM-86

Nokia Customer Care RF Troubleshooting and Manual Tuning Guide

Page 7 –8 COMPANY CONFIDENTIAL Issue 1