User Guide

Settings
41
■ Call
Select Menu > Settings > Call and from the following options:
Call forwarding — to forward your incoming calls (network service dependency).
You may not be able to forward your calls if some call restriction functions are
active. See Call restrictions in “Security,” p. 43.
Voice clarity > Active — to enhance speech intelligibility especially in
noisy environments
Anykey answer > On — to answer an incoming call by briefly pressing any key, except
the power key, the camera key, the left and right selection keys, or the end key
Automatic redial > On — to make a maximum of 10 attempts to connect the call
after an unsuccessful call attempt
1-touch dialing > On — to dial the names and phone numbers assigned to the
1-touch-dialing keys, 2 to 9, by pressing and holding the corresponding number key
Call waiting > Activate — to have the network notify you of an incoming
call while you have a call in progress (network service dependency).
See “Call waiting,” p. 21.
Summary after call > On — to briefly display the approximate duration and cost
(network service dependency) of the call after each call
Send my caller ID > Yes — to show your phone number to the person you are
calling (network service dependency). To use the setting agreed upon with
your service provider, select Set by network.
Slide call handling — to set the phone to answer calls when you open the phone
and to end calls when you close the phone
■ Phone
Select Menu > Settings > Phone and from the following options:
Language settings — To set the display language of your phone, select Phone
language. Automatic selects the language according to the information on the
SIM card. To select the USIM card language, select SIM language. To set a language
for the voice playback, select Recognition lang.. See “Enhanced voice dialing,” p. 20
and Voice commands in “My shortcuts,” p. 35.
Security keyguard — to set the phone to ask for the security code when you unlock
the keyguard. Enter the security code, and select On.
Automatic keyguard — to lock the keypad automatically after a preset time delay
when the phone is in the standby mode and no function of the phone has been
used. Select On, and set the time.