User Guide

Call functions
20
4. Call functions
■ Make a call
1. Push the upper part of the phone up.
2. Enter the phone number, including the area code.
For international calls, press
*
twice for the international prefix (the
+ character replaces the international access code), enter the country code,
the area code without the leading 0, if necessary, and the phone number.
3. To call the number, press the call key.
To increase the volume in a call, press + and to decrease, press - .
4. To end the call or to cancel the call attempt, press the end key, or close the phone.
To search for a name or phone number that you have saved in Phonebook,
see “Search for a contact,” p. 30. Press the call key to call the number.
To access the list of dialed numbers, press the call key once in the standby mode.
To call the number, select a number or name, and press the call key.
■ 1-touch dialing
Assign a phone number to one of the 1-touch-dialing keys, 2 to 9. See “1-touch
dials,” p. 32. Call the number in either of the following ways:
• Press a 1-touch-dialing key, then the call key.
•If 1-touch dialing is set to On, press and hold a 1-touch-dialing key until
the call begins. See 1-touch dialing in “Call,” p. 41.
■ Enhanced voice dialing
You can make a phone call by saying the name that is saved in the contact list
of the phone. Voice commands are language-dependent. To set the language,
see Recognition lang. in “Phone,” p. 41.
Make a voice dialing call
Note: Using voice tags may be difficult in a noisy environment or during
an emergency, so you should not rely solely upon voice dialing in all
circumstances.
1. In the standby mode, press and hold the right selection key, or press and hold
the volume down key. A short tone is played, and Speak now is displayed.