User Guide

Table Of Contents

To set the self-timer delay, select > , and the delay needed before the image

is captured.

To activate the self-timer, select Activate. The stopwatch icon on the screen blinks

and the remaining time is displayed when the timer is running. The camera captures

the image after the selected delay elapses.

To switch off the self-timer, select

> > .

Tip: Select 2 seconds to keep your hand steady when capturing an image.

Capture images in a sequence

Select Menu > Applications > Camera.

To start capturing images in a quick sequence, select Menu > Applications >

Camera and

> Sequence. To close the settings window, tap the screen above

the window. Press and hold the capture key. The device captures images until you

release the key or until the memory runs out. If you press the capture key briefly,

the device captures 18 images in a sequence.

The captured images are displayed in a grid. To view an image, select the image.

To return to the sequence mode viewfinder, press the capture key.

You can also use sequence mode with the self-timer.

To deactivate sequence mode, select

> Single shot.

Video recording

Record videos

1. To switch from image mode to video mode, if necessary, select and the video

mode

2. To start recording, press the capture key or tap

. A red record icon is displayed,

and a tone sounds.

Camera