Nokia 5230 User Guide Issue 4.
DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this RM-588 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/ phones/declaration_of_conformity/. © 2010 Nokia. All rights reserved. Nokia, Nokia Connecting People, Nokia Care, and Ovi are trademarks or registered trademarks of Nokia Corporation. Nokia tune is a sound mark of Nokia Corporation.
Reverse engineering of software in the device is prohibited to the extent permitted by applicable law. Insofar as this user guide contains any limitations on Nokia's representations, warranties, damages and liabilities, such limitations shall likewise limit any representations, warranties, damages and liabilities of Nokia's licensors. The availability of particular products and applications and services for these products may vary by region.
Contents Safety........................................8 About your device..................................9 Network services..................................10 1. Find help.............................11 In-device help.......................................11 Support.................................................11 Software updates over the air............12 Update software using your PC..........13 Settings.................................................13 Access codes............................
Alphanumeric keypad..........................48 Touch input settings............................51 6. Contacts..............................51 Save and edit names and numbers................................................52 Contacts toolbar...................................52 Manage names and numbers.............52 Default numbers and addresses.........53 Ringing tones, images, and call text for contacts...........................................53 Copy contacts.......................................
Contents Navigate pages..................................100 Web feeds and blogs.........................100 Widgets...............................................100 Content search...................................101 Bookmarks..........................................101 Empty the cache.................................101 Connection security...........................102 Get voice guidance............................115 Drive to your destination..................116 Navigation view.....................
Make calculations..............................141 Converter............................................141 Dictionary...........................................141 21. Settings...........................142 Phone settings...................................142 Call settings........................................150 22. Troubleshooting.............151 23. Green tips........................154 Save energy........................................154 Recycle................................................
Safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.
About your device Safety The wireless device described in this guide is approved for use on the WCDMA 900/2100 and GSM/EDGE 850/900/1800/1900. Contact your service provider for more information about networks. Your device supports several connectivity methods and like computers may be exposed to viruses and other harmful content. Exercise caution with messages, connectivity requests, browsing, and downloads.
Safety Network services To use the device you must have service from a wireless service provider. Some features are not available on all networks; other features may require that you make specific arrangements with your service provider to use them. Network services involve transmission of data. Check with your service provider for details about fees in your home network and when roaming on other networks. Your service provider can explain what charges will apply.
1. Find help In-device help Your device contains instructions to help to use the applications in your device. To open help texts from the main menu, select Menu > Help and the application for which you want to read instructions. When an application is open, to access the help text for the current view, select Options > Help. When you are reading the instructions, to change the size of the help text, select Options > Decrease font size or Increase font size.
Find help If your issue remains unsolved, contact Nokia for repair options. See www.nokia.com/repair. Before sending your device for repair, always back up the data in your device. Software updates over the air Select Menu > Applications > SW update. With Software update (network service), you can check if there are updates available for your device software or applications, and download them to your device.
● Disclaimer — View the Nokia licence agreement. Find help Update software using your PC Nokia Software Updater is a PC application that enables you to update your device software. To update your device software, you need a compatible PC, broadband internet access, and a compatible USB data cable to connect your device to the PC. To get more information and to download the Nokia Software Updater application, go to www.nokia.com/softwareupdate.
Find help apply, and all the personal data in your device may be deleted. For more information, contact a Nokia Care point or your device dealer. ● Personal Unblocking Key (PUK) code and PUK2 code — These codes (8 digits) are required to change a blocked PIN code or PIN2 code, respectively. If the codes are not supplied with the SIM card, contact the network service provider whose SIM card is in your device. ● UPUK code — This code (8 digits) is required to change a blocked UPIN code.
Find help If the network mode is set to dual mode in the network settings, the device searches for the 3G network. To set the device to use only the GSM network, select Menu > Settings and Connectivity > Network > Network mode > GSM. ● The backlight of the display increases the demand on battery power. In the display settings, you can adjust the display brightness and change the time-out period after which the backlight is switched off.
Get started 2. Get started Insert the SIM card Important: To prevent damage to the SIM card, always remove the battery before you insert or remove the card. Important: Do not use a mini-UICC SIM card, also known as a micro-SIM card, a micro-SIM card with an adapter, or a SIM card that has a mini-UICC cutout (see figure) in this device. A micro SIM card is smaller than the standard SIM card.
2. Insert a SIM card in the SIM card slot. Make sure the contact area on the card is facing up and the bevelled corner is facing toward the device. Push the card in. 3. Close the cover of the SIM card slot. Make sure the cover is properly closed. If the SIM card is not properly in place, the device can only be used in the offline profile. Get started Insert the battery Always switch the device off and disconnect the charger before removing the battery. 1. Remove the back cover. © 2010 Nokia.
Get started 2. Insert the battery. 3. To replace the cover, direct the top locking catches toward their slots, and press down until the cover locks into place. Insert the memory card Use only compatible microSD and microSDHC cards approved by Nokia for use with this device. Nokia uses approved industry standards for memory cards, but some brands may not be fully compatible with this device. Incompatible cards may damage the card and the device and corrupt data stored on the card. 18 © 2010 Nokia.
Get started 1. Open the cover of the memory card slot. 2. Insert a compatible memory card in the memory card slot. Make sure the contact area on the card is facing up. Push the card in. You can hear a click when the card locks into place. 3. Close the cover of the memory card slot. Make sure the cover is properly closed. Charge the battery Your battery has been partially charged at the factory. If the device indicates a low charge, do the following: 1. Connect the charger to a wall outlet. © 2010 Nokia.
Get started 2. Connect the charger to the device. 3. When the device indicates a full charge, disconnect the charger from the device, then from the wall outlet. You do not need to charge the battery for a specific length of time, and you can use the device while it is charging. If the battery is completely discharged, it may take several minutes before the charging indicator appears on the display or before any calls can be made.
Keys and parts Get started 1 — Micro USB connector 2 — Nokia AV connector (3.5mm) 3 — Charger connector 4 — Power key 5 — Earpiece 6 — Touch screen 7 — Proximity detector 8 — Volume/Zoom key 9 — Media key 10 — Lock switch 11 — Capture key © 2010 Nokia. All rights reserved.
Get started 12 — End key 13 — Menu key 14 — Call key 15 — Camera lens 16 — Loudspeaker 17 — SIM card slot 18 — Memory card slot 19 — Wrist strap hole 20 — Microphone Your device also comes with a plectrum stylus that can be attached to the device with the wrist strap. Do not cover the area above the touch screen, for example, with protective film or tape. 22 © 2010 Nokia. All rights reserved.
Switch the device on Get started 1. Press and hold the power key. 2. If the device asks for a PIN code or lock code, enter it, and select OK. To delete a number, select . The factory setting for the lock code is 12345. 3. Select your location. If you accidentally select the wrong location, select Back. 4. Enter the date and time. When using the 12-hour time format, to switch between a.m. and p.m., select any number.
Get started Interactive display elements To open the clock application, select the clock (1). To open the calendar, or to change the profile, select the date or the profile name (2). ), or to view To view or modify connectivity settings ( missed events, select the top right corner (3). To make a phone call, select Telephone or To open the contacts list, select Contacts or (4). (5). To open the main menu, press the menu key (6).
Get started Important: Use only a stylus approved by Nokia for use with this device. Using any other stylus may invalidate any warranty applying to the device and may damage the touch screen. Avoid scratching the touch screen. Never use an actual pen or pencil or other sharp objects to write on the touch screen. ● List items in an application, such as the Drafts folder in the folder list in Messaging Tip: When you open a list view, the first item is already highlighted.
Get started Swipe To swipe, slide your finger or the stylus quickly left or right on the screen. When viewing an image, to view the next or previous image, swipe the image left or right, respectively. Swipe to answer a call — To answer an incoming call, swipe from left to right. Swipe to stop an alarm — To stop a sounding alarm, swipe from left to right. To snooze the alarm, swipe from right to left. Scroll To scroll up or down in lists that have a scroll bar, drag the slider of the scroll bar.
Media key Get started To open applications such as the music player or browser, select the media key ( ) to open the media bar, and select the application. Change the ringing tone Select Menu > Settings and Personal > Profiles. You can use profiles to set and customise the ringing tones, message alert tones, and other tones for different events, environments, or caller groups. To personalise a profile, go to the profile, and select Options > Personalise.
Your device Nokia Care services If you need to contact Nokia Care services, check the list of local Nokia Care contact centres at www.nokia.com/customerservice. Maintenance For maintenance services, find your nearest Nokia Care point at www.nokia.com/ repair. 3. Your device Phone setup When you switch on your device for the first time, the Phone setup application is displayed. To access the Phone setup application later, select Menu > Applications > Phone setup.
Transfer content for the first time Your device 1. To retrieve data from the other device for the first time, on your device, select Menu > Applications > Switch. 2. Select the connection type you want to use to transfer the data. Both devices must support the selected connection type. 3. If you select Bluetooth connectivity as the connection type, connect the two devices. To have your device search for devices with Bluetooth connectivity, select Continue.
Your device The ringing type is set to Silent, and the message and e-mail alert tones are turned off. A timed profile is active. The touch screen and keys are locked. A clock alarm is active. The second phone line is being used (network service). All calls to the device are diverted to another number (network service). If you have two phone lines, a number indicates the active line. A compatible headset is connected to the device. A compatible text phone is connected to the device.
Your device Contacts bar To add a contact to the home screen, in the home screen, select New contact, and follow the instructions. > Options > To communicate with a contact, select the contact and from the following: Call Send a message to the contact. Add a link to an Ovi contact. If the contact. you want to chat to an Ovi contact, select the contact. The icon changes to . To Refresh the contact's web feeds. start chatting, select the icon.
Your device Offline profile The offline profile lets you use the device without connecting to the wireless cellular network. When the offline profile is active, you can use your device without a SIM card. Activate the offline profile — Press the power key briefly, and select Offline. When you activate the offline profile, the connection to the cellular network is closed. All radio frequency signals to and from the device to the cellular network are prevented.
Volume and loudspeaker control Your device To adjust the volume level when you have an active call or are listening to a sound clip, use the volume key. The built-in loudspeaker allows you to speak and listen from a short distance without having to hold the device to your ear. To use the loudspeaker during a call, select Activate loudsp.. To turn off the loudspeaker, select Activate handset.
Your device card > Remote phone locking > Enabled. Tap the text input field to enter the , and verify the message. Enter text message content (5 to 20 characters), select the lock code. Headset You can connect a compatible headset or compatible headphones to your device. You may need to select the cable mode. Warning: When you use the headset, your ability to hear outside sounds may be affected. Do not use the headset where it can endanger your safety.
Attach a wrist strap Your device Tip: Attach the plectrum stylus to the device like a wrist strap. Remove the SIM card 1. Remove the back cover by lifting it from the top end of the device. 2. Remove the battery. 3. Open the cover of the SIM card slot. Place the tip of the stylus in the opening under the battery, and push the SIM card sideways to slide it out of the slot. Pull the SIM card out. 4. Replace the battery and the back cover. © 2010 Nokia. All rights reserved.
Make calls Remove the memory card Important: Do not remove the memory card during an operation when the card is being accessed. Doing so may damage the memory card and the device, and corrupt data stored on the card. 1. If the device is switched on, before you remove the card, press the power key, and select Remove memory card. 2. When Remove memory card? Some applications will be closed. is displayed, select Yes. 3.
Make calls For international calls, select * twice for the + character (which replaces the international access code), and enter the country code, area code (omit the leading zero if necessary), and phone number. 2. To make the call, press the call key. 3. To end the call (or to cancel the call attempt), press the end key. Pressing the end key always ends a call, even if another application is active. To make a call from the contacts list, select Menu > Contacts. Go to the desired name.
Make calls Many of the options that you can use during a voice call are network services. Voice mailbox To call your voice mailbox (network service), in the home screen, select Telephone, and select and hold 1. 1. To change the phone number of your voice mailbox, select Menu > Settings and Calling > Call mailbox, a mailbox, and Options > Change number. 2. Enter the number (obtained from your network service provider), and select OK. Answer or reject a call To answer a call, press the call key.
Make calls 2. To make a call to another participant, select Options > New call. The first call is put on hold. 3. When the new call is answered, to join the first participant in the conference . call, select To add a new person to the call, make a call to another participant, and add the new call to the conference call. To have a private conversation with one of the participants, select . . The conference call is put on hold on your Go to the participant, and select device.
Make calls To activate call waiting (network service), select Menu > Settings and Calling > Call > Call waiting. 1. To answer the waiting call, press the call key. The first call is put on hold. 2. To switch between the two calls, select Options > Swap. 3. To connect a call on hold with an active call, and to disconnect yourself from the calls, select Options > Transfer. 4. To end the active call, press the end key. 5. To end both calls, select Options > End all calls.
Video sharing Make calls Use video sharing (network service) to send live video or a video clip from your mobile device to another compatible mobile device during a voice call. The loudspeaker is active when you activate video sharing. If you do not want to use the loudspeaker for the voice call while you share video, you can also use a compatible headset. Warning: Continuous exposure to high volume may damage your hearing.
Make calls Person-to-person connection settings A person-to-person connection is also known as a Session Initiation Protocol (SIP) connection. The SIP profile settings must be configured in your device before you can use video sharing. Ask your service provider for the SIP profile settings, and save them to your device. Your service provider may send you the settings or give you a list of the needed parameters. To add a SIP address to a contact: 1. Select Menu > Contacts. 2.
Make calls You may need to convert the video clip into a suitable format to be able to share it. If your device notifies you that the video clip must be converted, select OK. Your device must have a video editor for the conversion to work. 2. If the recipient has several SIP addresses or phone numbers including the country code saved in Contacts, select the desired address or number.
Make calls ● Yes — Accept the invitation, and activate the sharing session. ● No — Reject the invitation. The sender receives a message that you rejected the invitation. You can also press the end key to reject the invitation and end the voice call. To end the sharing session, select Stop. To end the voice call, press the end key. When you end the call, video sharing also ends. Log The Log application stores information about the communication history of the device.
Packet data Make calls Select Menu > Log. You may be charged for your packet data connections by the amount of data sent and received. To check the amount of data sent or received during packet data connections, select Data counter > All sent dataor All received data. To clear both sent and received information, select Options > Clear counters. You need the lock code to clear the information. Call duration Select Menu > Log.
Write text 5. Write text You can enter letters, numbers, and special characters in several different ways. The on-screen keyboards allow you to enter characters by tapping them with your fingers or the stylus. Handwriting recognition allows you to write characters directly onto the screen using the stylus as a pen. Handwriting recognition may not be available for all languages. Tap any text input field to enter letters, numbers, and special characters.
Write text 4 — Shift and caps lock - To enter an uppercase character when writing in lowercase, or vice versa, select the key before entering the character. To activate the caps lock, select the key twice. A line under the key indicates that the caps lock is activated. 5 — Letters 6 — Numbers and special characters 7 — Character accents 8 — Space bar 9 — Move - Move the cursor. 10 — Backspace 11 — Enter - Move the cursor to the next row or text input field.
Write text To enter letters and numbers (default mode), write words as you would normally. To select number mode, select . To enter non-Latin characters, select the corresponding icon, if available. To enter special characters, write them as you would normally, or select and the desired character. To delete characters or move the cursor back, swipe backwards (see Figure 1). To insert a space, swipe forwards (see Figure 2).
Write text 1 — Close - Closes the virtual keypad (Alphanumeric keypad). 2 — Input menu - Opens the touch input menu, which includes commands such as Activate predictive text and Writing language. 3 — Text input indicator - Opens a pop-up window, in which you can activate or deactivate predictive text input modes, change the character case, and switch between letter and number modes. 4 — Input mode - Opens a pop-up window, in which you can select the input mode.
Write text 8 — Star - Opens a special characters table. 9 — Shift - Changes the character case, activates or deactivates predictive text input modes, and switches between letter and number modes. Traditional text input Tap a number key (1-9) repeatedly until the desired character appears. There are more characters available for a number key than are visible on the key.
4. Start writing the next word. Contacts Switch between text modes To deactivate predictive text input for all editors in your device, select > > Deactivate prediction, or quickly double-tap #. Alternatively, you can select Predictive text > Off. Touch input settings Select Menu > Settings and Phone > Touch input. To modify text input settings for the touch screen, select from the following: ● Handwriting training — Open the handwriting training application.
Contacts To open the contacts list, in the home screen, depending on the home screen theme, select Contacts or . Save and edit names and numbers 1. To add a new contact to the contacts list, tap . 2. Tap a field to enter the information in the field. To close the text input, select . Fill in the fields that you want, and select Done. To edit contacts, select a contact and Options > Edit. Contacts toolbar On the contacts list toolbar, select from the following: ● ● ● Call — Call the desired contact.
Contacts ● Very short names are not accepted. Use long names, and avoid similar names for different numbers. Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialling in all circumstances. Default numbers and addresses You can assign default numbers or addresses to a contact. If a contact has several numbers or addresses, you can easily call or send a message to a certain number or address.
Contacts To remove the ringing tone, select Default tone from the list of ringing tones. To view, change or remove the image from a contact, select the contact, Options > Image, and the desired option. Copy contacts When you open the contacts list for the first time, the device asks if you want to copy names and numbers from the SIM card to your device. To start copying, select OK. If you do not want to copy the contacts from the SIM card to your device, select Cancel.
Fixed dialling Messaging Select Menu > Contacts and Options > SIM numbers > Fixed dial contacts. With the fixed dialling service, you can restrict calls from your device to certain phone numbers. Not all SIM cards support the fixed dialling service. For more information, contact your service provider. When security features that restrict calls are in use (such as call barring, closed user group, and fixed dialling), calls may be possible to the official emergency number programmed into your device.
Messaging Messaging contains the following folders: Inbox — Received messages, except e-mail and cell broadcast messages, are stored here. ● My folders — Organise your messages into folders. ● ● ● ● ● ● Mailbox — Connect to your remote mailbox to retrieve your new e-mail messages, or view your previously retrieved e-mail messages offline. Drafts — Draft messages that have not been sent are stored here.
Messaging left in the Outbox folder, and the device attempts to resend it periodically. Sending a mail requires a data connection, and continuous attempts to resend the mail may incur charges from your service provider. In the Outbox folder, you can delete such a message or move it to the Drafts folder. Messaging requires network services. Send a text or multimedia message — Select New message. Send an audio or mail message — Select Options > Create message, and the relevant option.
Messaging In the Inbox folder, indicates an unread text message, an unread multimedia an unread audio message, and data received through Bluetooth message, connectivity. When you receive a message, and 1 new message are displayed in the home screen. To open the message, select Show. To open a message in the Inbox folder, select the message. To reply to a received message, select Options > Reply. Multimedia messages Important: Exercise caution when opening messages.
Set up e-mail Messaging To set up e-mail, select Menu > Messaging and Mailbox. You can set up several e-mail accounts, for example, a personal e-mail account and a corporate e-mail account. To set up e-mail from your home screen, select the relevant plug-in. Alternatively, to set up an e-mail account, select Menu > Applications > Sett. wizard. E-mail service The e-mail service on your Nokia device automatically transfers e-mail from your existing e-mail address to your device.
Messaging If you select Messaging > Mailbox and have not set up your e-mail account, you are prompted to do so. To start creating the e-mail settings with the mailbox guide, select Start. When you create a new mailbox, the name you give to the mailbox replaces Mailbox in the Messaging main view. You can have up to six mailboxes. Open the mailbox Select Menu > Messaging and a mailbox. When you open the mailbox, the device asks if you want to connect to the mailbox.
Messaging 2. To close the connection and view the e-mail messages offline, select Options > Disconnect. 3. To open an e-mail message, select the message. If the e-mail message has not been retrieved and you are offline, you are asked if you want to retrieve this message from the mailbox. To view e-mail attachments, open the message, and select the attachment field indicated by . If the attachment has not been retrieved to the device, select Options > Retrieve.
Messaging Disconnect from the mailbox When you are online, to end the data connection to the remote mailbox, select Options > Disconnect. Mail for Exchange With Mail for Exchange, you can receive your work e-mail to your device. You can read and reply to your e-mails, view and edit compatible attachments, view calendar information, receive and reply to meeting requests, schedule meetings, and view, add, and edit contact information.
Messaging You can access and modify the Mail for Exchange profile and settings in the Messaging settings. View messages on a SIM card Select Menu > Messaging and Options > SIM messages. Before you can view SIM messages, you must copy them to a folder in your device. 1. Select Options > Mark/Unmark > Mark or Mark all to mark messages. 2. Select Options > Copy. A list of folders opens. 3. To start copying, select a folder. To view the messages, open the folder.
Messaging Messaging settings The settings may be preconfigured in your device, or you may receive them in a message. To enter settings manually, fill in all fields marked with Must be defined or an asterisk. Some or all message centres or access points may be preset for your device by your service provider, and you may not be able to change, create, edit, or remove them. Text message settings Select Menu > Messaging and Options > Settings > Text message.
Messaging ● Image size — Define the size of the image in a multimedia message. ● MMS creation mode — If you select Guided, the device informs you if you try to send a message that may not be supported by the recipient. If you select Restricted, the device prevents you from sending messages that may not be supported. To include content in your messages without notifications, select Free. ● Access point in use — Select which access point is used as the preferred connection.
Messaging E-mail settings Manage mailboxes Select Menu > Messaging and Options > Settings > E-mail. To select which mailbox you want to use to send and receive e-mail, select Mailbox in use and a mailbox. To remove a mailbox and its messages from your device, select Mailboxes, tap the mailbox to be removed if it is not already highlighted, and select Options > Delete. To create a new mailbox, select Mailboxes > Options > New mailbox.
Messaging Using Ovi Contacts may involve the transmission of large amounts of data through your service provider's network. Contact your network service provider for information about data transmission charges. Start using Ovi Contacts Select Contacts, and open the Ovi tab. The Ovi Contacts service is part of Ovi, and uses the same account information. If you are new to Ovi and its services, to start using the Ovi Contacts application, you must register to Ovi by creating a Nokia account.
Messaging Select Go online > Options and from the following: ● Select — Select the item. ● Go online — Connect to the service if you are offline. ● My profile — Edit your profile information. ● Recommend to friend — Invite a contact to join Ovi Contacts. The invitation is sent as a text message. ● Settings — Modify the Ovi Contacts settings. The available options may vary. Create and edit your profile Edit your profile information — Select My profile.
Messaging ● Edit text — Cut, copy, or paste text. ● Change — Change your status (when the status field is selected). ● Activate — Start broadcasting your location or your now playing information to your friends (when either field is selected). ● Undo changes — Undo the changes you made in the profile view. ● Edit shared locations — Select the landmarks you want to broadcast to your friends (when the My location field is selected).
Messaging ● Search — Search for the contact whose name or other related keyword you entered in the Search friends field. ● Edit text — Cut, copy, or paste text. The available options may vary. Chat with your friends Start a chat with a friend — Select the friend. Send a chat message — Enter the text in the message field, and select the send icon. In the chat view, select Options and from the following: ● Send — Send the message. ● Add smiley — Insert a smiley.
Ovi Sync Messaging To sync your device with Ovi, you must have a Nokia account and activate the Ovi Contacts service on your device. Sync your device with Ovi 1. If you sync your device with Ovi for the first time, use the Sync wizard to select what content you want to sync, and the sync interval. 2. Select Synchronise. If your device is in the Offline profile, connect to the internet when prompted. Select Options and from the following: ● Start — Sync your device with Ovi.
Messaging To select the locations you want to share with your friends, select Share my location > My shared landmarks, and select the landmarks from the list. Select Options to edit, mark, and unmark items on the list. Whenever you are online with the Contacts on Ovi service, and in one of the selected locations, your friends can see your location. Ovi Contacts settings Select Options > Settings.
Modify presence settings Messaging Select from the following: ● Share my location — Allow your friends to see your location. ● Share now playing — Allow your friends to see what music you are currently listening to on your mobile device. ● Share call status — Allow your friends to see your call status. Share your location Select Share my location and from the following: ● Sharing allowed — Allow your friends to see your location in selected landmarks.
Messaging ● Login on start-up — Sign in automatically to Ovi Contacts when you switch on your mobile device. ● Auto-accept friend invit. — Accept friend requests automatically without notification. ● Auto-accept voice msgs. — Allow voice message to be accepted automatically. ● Message tone — Select a tone for new messages. ● Friend online tone — Select the tone that sounds when a friend comes online. ● Icon on Home screen — Add the Ovi Contacts shortcut icon to your device home screen.
Personalise your device Using network services and downloading content to your device may result in data traffic costs. Start chatting Select Menu > Applications > IM. 1. Select the service or services that you want to use to chat, and then select Continue. You can sign in to and chat in several services at the same time. You need to separately sign in to each service. 2. In your contacts list, select the contact you want to chat with.
Music folder To have a wallpaper image or a slide show of changing images as the background in the home screen, select Wallpaper > Image or Slide show. To change the image displayed in the home screen when a call is received, select Call image. Profiles Select Menu > Settings and Personal > Profiles. You can use profiles to set and customise the ringing tones, message alert tones, and other tones for different events, environments, or caller groups.
Music folder Play a song or a podcast To open Music player, select Menu > Music > Music player. You may have to refresh the music and podcast libraries after you have updated the song or podcast selection in your device. To add all available items to the library, select Options > Refresh library. To play a song or a podcast: 1. Select categories to navigate to the song or podcasts you want to hear. 2. To play an item, select the item from the list.
Music folder To close the player, select Options > Exit. Playlists Select Menu > Music > Music player and Playlists. To view details of the playlist, select Options > Playlist details. Create a playlist 1. 2. 3. 4. Select Options > New playlist. Enter a name for the playlist, and select OK. To add songs now, select Yes; or to add the songs later, select No. If you select Yes, select artists to find the songs you want to add to the playlist. Select Add to add items.
Podcasts Music folder Select Menu > Music > Music player and Podcasts. Podcast episodes have three states: never played, partially played, and completely played. If the state is partially played, the episode plays from the last playback position the next time it is played. If the state is never played or completely played, the episode plays from the beginning.
Music folder Download, transfer, and manage music between your computer and mobile device 1. Open Nokia Ovi Player on your computer. If you want to download music, register or sign in. 2. Connect your device to the computer with a compatible USB data cable. 3. To select the connection mode on your device, select Media transfer. Ovi Music With Ovi Music (network service), you can search, browse, purchase, and download music to your device. The Ovi Music service will eventually replace the Music store.
Nokia Podcasting Music folder With the Nokia Podcasting application (network service), you can search, discover, subscribe to, and download podcasts over the air, and play, manage, and share audio and video podcasts with your device. Podcasting settings To open Nokia Podcasting, select Menu > Music > Podcasting. Before using Nokia Podcasting, define your connection and download settings. Check with your service provider for terms and data service fees before using different connection methods.
Music folder ● If limit exceeds — Define what to do if the downloads exceed the download limit. Setting the application to retrieve podcasts automatically may involve the transmission of large amounts of data through your service provider’s network. Contact your service provider for information about data transmission charges. To restore the default settings, select Options > Restore default in the settings view.
Camera When you open the application for the first time, you can choose to have the local stations tuned automatically. To listen to the next or the previous station, select To mute the radio, select or . . Select Options and from the following: ● Stations — View saved radio stations. ● Tune stations — Search for radio stations. ● Save — Save the radio station. ● Activate loudspeaker or Deactivate loudspeaker — Turn the loudspeaker on or off.
Camera Activate the camera To activate the camera, press the capture key. Image capture Still image controls and indicators The still image viewfinder displays the following: 1 — Mode indicator 2 — Zoom slider. To activate or deactivate the zoom slider, tap the screen.
Camera The capture and recording settings view provides you with shortcuts to different items and settings before capturing an image or recording a video clip. The capture and recording settings return to the default settings after you close the camera. Select from the following: — Select the scene. or or — Switch between video and image mode. — Show or hide the viewfinder grid (images only). — Activate the self-timer (images only). — Activate sequence mode (images only). — Open Gallery.
Camera The capture settings are shooting-mode specific. Switching between the modes does not reset the defined settings. If you select a new scene, the capture settings are replaced by the selected scene. You can change the capture settings after selecting a scene if needed. Saving the captured image may take longer if you change the zoom, lighting, or colour settings. Capture images When capturing an image, note the following: ● Use both hands to keep the camera still.
Camera ● ● — Upload the image to a compatible online album. Delete — Delete the image. To use the image as wallpaper in the home screen, select Options > Use image > Set as wallpaper. To set the image as a default call image to be used for every call situation, select Options > Use image > Set as call image. To assign the image to a contact, Options > Use image > Assign to contact. To return to the viewfinder to capture a new image, press the capture key.
Camera Location information can be added to an image or a video clip if location coordinates are found via the network. It may take several minutes to receive the coordinates. The best conditions are obtained in open areas away from high buildings. If you share your image or video clip which has location information attached to it, the location information is also shared and your location may be visible to third parties that can view the image or the video clip.
Camera To deactivate sequence mode, select > Single shot. Video recording Record videos 1. To switch from image mode to video mode, if necessary, select . mode and the video 2. To start recording, press the capture key or tap . A red record icon is displayed, and a tone sounds. 3. To pause recording at any time, select Pause. To resume, select Continue. If you pause recording and do not press any key within one minute, the recording stops.
Gallery 5 — Battery charge level indicator 6 — Video quality indicator. To modify this setting, select Options > Settings > Video quality. 7 — Video clip file type 8 — Available recording time. When you are recording, the current video length indicator also shows the elapsed and remaining time.
Gallery ● ● ● Songs — Open Music player. Sound clips — Listen to sound clips. Other media — View presentations. You can browse, open, and create folders; and mark, copy, move, and add items to folders. Files stored on your compatible memory card (if inserted) are indicated with . To open a file, select a file from the list. Video clips and files with the .ram file extension open and play in Video centre, and music and sound clips in Music player.
Share online The toolbar helps you select frequently used functions with images, video clips, and folders. From the toolbar, select from the following: ● ● ● Send — Send the selected image or video clip. Edit — Edit the selected image or video clip. Delete — Delete the selected image or video clip. Organise images and videos Select Menu > Gallery and Images & videos > Options and from the following: ● Folder options — To move files to folders, select Move to folder.
Share online To subscribe to an online sharing service, go to the service provider's website, and check that your Nokia device is compatible with the service. Create an account as instructed on the website. You receive a user name and password needed to set up your device with the account. 1. To activate a service, open the Share online application in your device, select a service and Options > Activate. 2. Allow the device to create a network connection.
Nokia Video Centre To add tags to the post, select Tags:. To enable the posting of location information contained in the file, select Location:. To send the post to the service, select Options > Upload. Post files from Gallery You can post your files from Gallery to an online sharing service. 1. Select Menu > Gallery and the files you want to post. 2. Select Options > Send > Upload and the desired account. 3. Edit your post as required. 4. Select Options > Upload. 13.
Nokia Video Centre 2. To connect to a service to install video services, select Add new services and the desired video service from the service catalogue. View a video clip To browse the content of installed video services, select Video feeds. The content of some video services is divided into categories. To browse video clips, select a category. To search for a video clip in the service, select Video search. Search may not be available in all services.
Nokia Video Centre Video feeds Select Menu > Applications > Video centre. The content of the installed video services is distributed using RSS feeds. To view and manage your feeds, select Video feeds. Select Options and from the following: ● Feed subscriptions — Check your current feed subscriptions. ● Feed details — View information about a video. ● Add feed — Subscribe to new feeds. Select Via Video directory to select a feed from the services in the video directory.
Transfer videos from your PC Nokia Video Centre Transfer your own video clips from compatible devices using a compatible USB data cable. Only video clips which are in a format supported by your device are shown. 1. To view your device on a PC as a mass memory device where you can transfer any data files, connect using a USB data cable. 2. Select Mass storage as the connection mode. A compatible memory card needs to be inserted in the device. 3. Select the video clips you want to copy from your PC. 4.
Web browser 14. Web browser With the web browser, you can view hypertext markup language (HTML) pages on the web as originally designed (network service). You can also browse web pages that are designed specifically for mobile devices, and use extensible hypertext markup language (XHTML), or the wireless markup language (WML). To browse the web, you need to have an internet access point defined in your device. Tip: To open the browser, select the media key ( ) to open the media bar, and select .
Web browser To view snapshots of the web pages you have visited during the current browsing session, select Back (available if History list is activated in the browser settings and the current web page is not the first web page you visit). To prevent or allow the automatic opening of multiple windows, select Options > Web page options > Block pop-ups or Allow pop-ups. To zoom in on a web page, double-tap the display.
Web browser Navigate pages When you are browsing a web page that contains a large amount of information, you can use Page overview to view what kind of information the web page contains. To see an overview of the current web page, open the toolbar, and select . > Web feeds and blogs Web feeds are XML files on web pages that are used to share, for example, the latest news headlines or blogs. Blogs or weblogs are web diaries. It is common to find web feeds on web, blog, and wiki pages.
Web browser Using widgets may involve the transmission of large amounts of data through your service provider's network. For information about data transmission charges, contact your service provider. Content search Select Menu > Internet > Web. To search for text within the current web page, select Options > Find keyword. To go to the next match, from the toolbar, select Find next. To go to the previous match, from the toolbar, select Find previous. Bookmarks Select Menu > Internet > Web.
Web browser A cache is a memory location that is used to store data temporarily. If you have tried to access or have accessed confidential information requiring passwords, empty the cache after each use. To empty the cache, select Options > Clear privacy data > Cache. Connection security If the security indicator ( ) is displayed during a connection, the data transmission between the device and the internet gateway or server is encrypted.
15. Positioning (GPS) Positioning (GPS) You can use applications such as GPS data to calculate your location or measure distances. These applications require a GPS connection. About GPS The coordinates in the GPS are expressed using the international WGS-84 coordinate system. The availability of the coordinates may vary by region. The Global Positioning System (GPS) is operated by the government of the United States, which is solely responsible for its accuracy and maintenance.
Positioning (GPS) When you activate A-GPS, your device receives useful satellite information from an assistance data server over the cellular network. With the help of assisted data, your device can obtain the GPS position faster. Your device is preconfigured to use the Nokia A-GPS service, if no service providerspecific A-GPS settings are available. The assistance data is retrieved from the Nokia A-GPS service server only when needed.
Positioning (GPS) If your device has found satellites, a bar for each satellite is shown in the satellite info view. The longer the bar, the stronger the satellite signal. When your device has received enough data from the satellite signal to calculate your location, the bar colour changes. To view the positions of found satellites, select Chg. view. Initially your device must receive signals from at least four satellites to be able to calculate your location.
Positioning (GPS) With Landmarks, you can save the position information of specific locations in your device. You can sort the saved locations into different categories, such as business, and add other information to them, such as addresses. You can use your saved landmarks in compatible applications, such as GPS data. GPS coordinates are expressed using the international WGS-84 coordinate system. Select Options and from the following: ● New landmark — Create a new landmark.
Maps ● Integrated GPS — Use the integrated GPS receiver of your device. ● Assisted GPS — Use Assisted GPS (A-GPS) to receive assistance data from an assistance data server. ● Bluetooth GPS — Use a compatible external GPS receiver with Bluetooth connectivity. ● Network based — Use information from the cellular network (network service).
Maps ● Check weather forecasts and other local information, if available. Some services may not be available in all countries, and may be provided only in selected languages. The services may be network dependent. For more information, contact your network service provider. Almost all digital cartography is inaccurate and incomplete to some extent. Never rely solely on the cartography that you download for use in this device.
Map view Maps 1 — Selected location 2 — Indicator area 3 — Point of interest (for example, a railway station or a museum) 4 — Information area Change the look of the map View the map in different modes, to easily identify where you are. Select Menu > Maps and My position. Select and from the following: ● Map view — In the standard map view, details such as location names or motorway numbers, are easy to read. ● Satellite view — For a detailed view, use satellite images. © 2010 Nokia.
Maps ● Terrain view — View at a glance the ground type, for example, when you are travelling off-road. ● 3D — For a more realistic view, change the perspective of the map. ● Landmarks — Display prominent buildings and attractions on the map. ● Night mode — Dim the colours of the map. When travelling at night, the map is easier to read in this mode.
Maps of location data can be affected by adjustments to GPS satellites made by the United States government and is subject to change with the United States Department of Defense civil GPS policy and the Federal Radionavigation Plan. Accuracy can also be affected by poor satellite geometry. Availability and quality of GPS signals may be affected by your location, buildings, natural obstacles, and weather conditions.
Maps To avoid data transfer costs, you can also get search results without an active internet connection, if you have maps of the searched area stored on your device. View location details View more information about a specific location or place, such as a hotel or restaurant, if available. Select Menu > Maps and My position. View the details of a place — Select a place, its information area ( details.
Maps 4. Select Save place. Save a route 1. Select My position. 2. Tap the location. To search for an address or place, select Search. 3. Tap the location's information area ( ). 4. To add another route point, select Add to route. 5. Select Add new route point and the appropriate option. 6. Select Show route > Options > Save route. View your saved places and routes — Select Favourites > Places or Routes.
Maps If you need to delete places or routes, or add a route to a collection, go to the Ovi Maps internet service at www.ovi.com. Send places to your friends When you want to share place information with your friends, send these details directly to their devices. Select Menu > Maps and My position. Send a place to your friend's compatible device — Select a location on the map, tap the location's information area ( ), and select Send.
Maps The Facebook terms of use apply to sharing your location on Facebook. Familiarise yourself with the Facebook terms of use and the privacy practices. Before sharing your location to others, always consider carefully with whom you are sharing it. Check the privacy settings of the social networking service you are using as you might share your location with a large group of people.
Maps If you select a language that includes street names, also the street names are said aloud. Voice guidance may not be available for your language. Change the voice guidance language — In the main view, select and Navigation > Drive guidance or Walk guidance and the appropriate option. Deactivate voice guidance — In the main view, select Drive guidance or Walk guidance and None. and Navigation > Repeat the voice guidance for car navigation — In the navigation view, select Options > Repeat.
Maps Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety. Navigation view 1 — Route 2 — Your location and direction 3 — Compass 4 — Information bar (speed, distance, time) Get traffic and safety information Enhance your driving experience with real-time information about traffic events, lane assistance, and speed limit warnings, if available for your country or region. Select Menu > Maps and Drive.
Maps When planning a route, you can set the device to avoid traffic events, such as traffic jams or roadworks. Avoid traffic events — In the main view, select due to traffic. > Navigation > Reroute Walk to your destination When you need directions to follow a route on foot, Maps guides you over squares, and through parks, pedestrian zones, and even shopping centres. Select Menu > Maps and Walk. Walk to a destination — Select Set destination and the appropriate option.
Maps 4. To add another route point, select Add new route point and the appropriate option. Change the order of the route points 1. Select a route point. 2. Select Move. 3. Tap the place where you want to move the route point to. Edit the location of a route point — Tap the route point, and select Edit and the appropriate option. View the route on the map — Select Show route. Navigate to the destination — Select Show route > Options > Start driving or Start walking.
Connectivity Use the optimised driving route — Open the Settings tab, and select Drive > Route selection > Optimised. The optimised driving route combines the advantages of both the shorter and the faster routes. You can also choose to allow or avoid using, for example, motorways, toll roads, or ferries. 17. Connectivity Your device offers several options to connect to the internet or to another compatible device or PC.
Connectivity ● Network mode — Select which network to use. If you select Dual mode, the device uses the GSM or UMTS network automatically, according to the network parameters and the roaming agreements between the wireless service providers. For details and roaming costs, contact your network service provider. This option is shown only if supported by the wireless service provider.
Connectivity shown and can be shared by a new access point. If you skip this step, you are asked to select a connection method and to define the settings needed. To edit the settings of an access point, open one of the access point groups, and select an access point. Follow the instructions from your service provider. ● Connection name — Enter a name for the connection. ● Data bearer — Select the data connection type. Depending on the data connection you select, only certain setting fields are available.
Connectivity To edit a packet data access point, open one of the access point groups, and select an access point marked with . Follow the instructions from your service provider. Select from the following: ● Access point name — You obtain the access point name from your service provider. ● User name — The user name may be needed to make a data connection, and is usually provided by your service provider.
Connectivity Active data connections Select Menu > Settings and Connectivity > Connection mgr.. In the active data connections view, you can see open data connections: data calls packet data connections To end a connection, select Options > Disconnect. To end all open connections, select Options > Disconnect all. To view the details of a connection, select Options > Details. Synchronisation Select Menu > Settings and Connectivity > Data transfer > Sync.
Bluetooth connectivity Connectivity About Bluetooth connectivity With Bluetooth connectivity, you can make a wireless connection to other compatible devices, such as mobile devices, computers, headsets, and car kits. You can use the connection to send images, video and sound clips, and notes, transfer files from your compatible PC, and print images with a compatible printer. Since devices with Bluetooth wireless technology communicate using radio waves, they do not need to be in direct line-of-sight.
Connectivity which the visibility is set from shown to hidden, select Set visibility period. To hide your device from other devices, select Hidden. ● My phone's name — Edit the name shown to other devices with Bluetooth wireless technology. ● Remote SIM mode — Enable or disable another device, such as a compatible car kit accessory, to use the SIM card in your device to connect to the network. Security tips Select Menu > Settings and Connectivity > Bluetooth.
Connectivity 3. Select the device with which you want to connect. 4. If the other device requires pairing before data can be transmitted, a tone sounds, and you are asked to enter a passcode. The same passcode must be entered in both devices. When the connection is established, Sending data is displayed. Tip: When searching for devices, some devices may show only the unique address (device address). To find the unique address of your device, enter *#2820#.
Connectivity such as your compatible headset or PC, or devices that belong to someone you trust. indicates authorised devices in the paired devices view. ● Set as unauthorised — Connection requests from this device must be accepted separately every time. To cancel a pairing with a device, select Options > Delete. To cancel all pairings, select Options > Delete all.
Connectivity Before the remote SIM mode can be activated, the two devices must be paired and the pairing initiated from the other device. When pairing, use a 16-digit passcode, and set the other device as authorised. To use the remote SIM mode with a compatible car kit accessory, activate Bluetooth connectivity, and enable the use of the remote SIM mode with your device. Activate the remote SIM mode from the other device.
Connectivity To have the device ask the purpose of the connection each time a compatible data cable is connected, select Ask on connection > Yes. If the Ask on connection option is deactivated or you want to change the mode during an active connection, select USB connection mode and from the following: ● Ovi Suite — Use Nokia PC applications such as Nokia Ovi Suite, and Nokia Software Updater. ● Mass storage — Transfer data between your device and a compatible PC.
Connectivity ● Packet data connection — If you select When available and you are in a network that supports packet data, the device registers to the packet data network. Starting an active packet data connection (for example, to send and receive e-mail) is quicker than if the device establishes a packet data connection when needed. If there is no packet data coverage, the device periodically tries to establish a packet data connection.
Search 18. Search About Search Select Menu > Internet > Search. Search (network service) enables you to use various internet-based search services to find, for example, websites and images. The content and availability of the services may vary. Start a search Select Menu > Internet > Search. To search the contents of your mobile device, enter search terms in the search field, or browse the content categories. While you enter the search terms, the results are organised into categories.
Other applications content that is compatible with your mobile device and relevant to your tastes and location. 20. Other applications Clock Set time and date Select Menu > Applications > Clock. Select Options > Settings and from the following: ● Time — Set the time. ● Date — Set the date. ● Automatic time update — Set the network to automatically update the time, date, and time zone information for your device (network service). Alarm clock Select Menu > Applications > Clock.
Other applications World clock With the world clock, you can view the current time in different locations. Select Menu > Applications > Clock. View the time — Select World clock. Add locations to the list — Select Options > Add location. Set your current location — Go to a location, and select Options > Set as current location. The time in your device is changed according to the selected location. Ensure that the time is correct and matches your time zone.
File manager Other applications About File manager Select Menu > Applications > Office > File mgr.. With File manager, you can browse, manage, and open files on your device, memory card, or a compatible external drive. The available options depend on the memory you select. Find and organise files Select Menu > Applications > Office > File mgr.. To find a file, select Options > Find. Enter a search text that matches the file name.
Other applications To back up files, select Backup contents. Select the file types you want to back up on a memory card and Options > Back up now. Ensure that your memory card has enough free memory for the files that you have chosen to back up. Application manager About Application manager Select Menu > Settings and Application mgr.. With Application manager, you can see the software packages installed in your device.
Other applications widgets application installed on the memory card Important: Only install and use applications and other software from trusted sources, such as applications that are Symbian Signed or have passed the Java Verified™ testing. Before installation, note the following: ● To view the application type, version number, and the supplier or manufacturer of the application, select Options > View details.
Other applications To start an installed application, locate the application in the menu, and select the application. If the application does not have a default folder defined, it is installed in the Installed apps. folder in the main menu. To see which software packages are installed or removed and when, select Options > View log. Important: Your device can only support one antivirus application.
Other applications ● Software installation — Select whether Symbian software that has no verified digital signature can be installed. ● Online certificate check — Select to check the online certificates before installing an application. ● Default web address — Set the default web address used when checking online certificates. RealPlayer With RealPlayer, you can play video clips or stream media files over the air without saving them to the device first.
Other applications ● Mark/Unmark — Mark items in the list to send or delete multiple items at the same time. ● View details — View details of the selected item, such as format, resolution, and duration. ● Settings — Edit settings for video playback and streaming. In the Video clips, Recently played and Streaming links views, the following toolbar icons may be available: ● ● ● ● Send — Send a video clip or streaming link. Play — Play the video clip or video stream.
Other applications To listen to the sound clip, select . To select the recording quality or where you want to save your sound clips, select Options > Settings. To record a telephone conversation, open recorder during a voice call, and select . Both parties hear a tone at regular intervals during recording. Write notes Select Menu > Applications > Office > Notes. To write a note, select Options > New note. Tap the note field to enter text, and select . You can save plain text files (.
Settings Select Options and from the following: ● Listen — Listen to the selected word. ● History — Find previously translated words from the current session. ● Languages — Change the source or target language, download languages from the internet, or remove a language from the dictionary. You cannot remove the English language from the dictionary. You can have two additional languages installed, besides English. 21.
Language settings Settings Select Menu > Settings and Phone > Language. To change the device language, select Phone language. To change the writing language, select Writing language. To turn predictive text input on or off, select Predictive text. Display settings Select Menu > Settings and Phone > Display. Select from the following: ● Brightness — Adjust the brightness of your device display. ● Font size — Select the size of text and icons on the display.
Settings ● Voice command tutorial — Open the tutorial for voice commands. Accessory settings Select Menu > Settings and Phone > Accessories. Some accessory connectors indicate which type of accessory is connected to the device. Select an accessory and from the following: ● Default profile — Set the profile that you want activated each time you connect a certain compatible accessory to your device.
Settings You may receive server profiles and different configuration settings from your service providers and company information management department. These configuration settings may include connection and other settings used by different applications in your device. To connect to the server and receive configuration settings for your device, select Options > Server profiles, a profile, and Options > Start configuration.
Settings ● ● ● ● ● ● PIN2 code, contact your service provider. If you forget the lock code, contact a Nokia Care point or your service provider. Lock code — The lock code is used to unlock the device. To avoid unauthorised use of your device, change the lock code. The preset code is 12345. The new code can be 4-255 characters long. Alphanumeric characters and both uppercase and lowercase characters can be used. The device notifies you if the lock code is not properly formatted.
Settings Digital certificates do not guarantee safety; they are used to verify the origin of software. Important: Even if the use of certificates makes the risks involved in remote connections and software installation considerably smaller, they must be used correctly in order to benefit from increased security. The existence of a certificate does not offer any protection by itself; the certificate manager must contain correct, authentic, or trusted certificates for increased security to be available.
Settings ● Symbian installation: Yes — The certificate is able to certify the origin of a new Symbian operating system application. ● Internet: Yes — The certificate is able to certify servers. ● App. installation: Yes — The certificate is able to certify the origin of a new Java application. To change the value, select Options > Change trust setting. Security module Select Menu > Settings and Phone > Phone mgmt. > Security > Security module.
Settings ask that such DRM software's ability to access new DRM-protected content be revoked. Revocation may also prevent renewal of such DRM-protected content already in your device. Revocation of such DRM software does not affect the use of content protected with other types of DRM or the use of non-DRM-protected content. Digital rights management (DRM) protected content comes with an associated activation key that defines your rights to use the content.
Settings Call settings Call settings Select Menu > Settings. Select Calling > Call and from the following: ● Send my caller ID — Select Yes to show your phone number to the person you are calling. To use the setting agreed upon with your service provider, select Set by network) (network service). ● Call waiting — Activate your device to notify you of incoming calls while you are in a call (network service), or check whether the function is activated.
Troubleshooting Call divert allows you to divert incoming calls to your voice mailbox or another phone number. For details, contact your service provider. 1. Select the type of calls to divert and a diverting option. For example, to divert all voice calls, select Voice calls > All voice calls. 2. To activate call divert, select Activate. 3. To divert calls to your voice mailbox, select To voice mailbox. 4.
Troubleshooting Q: What is my password for the lock, PIN, or PUK codes? A: The default lock code is 12345. If you forget the lock code, contact your device dealer. If you forget a PIN or PUK code, or if you have not received such a code, contact your network service provider. For information about passwords, contact your access point provider, for example, a commercial internet service provider (ISP) or network service provider.
Q: Why can’t I end a Bluetooth connection? Troubleshooting A: If another device is connected to your device, you can end the connection from the other device or deactivate Bluetooth connectivity in your device. Select Menu > Settings and Connectivity > Bluetooth > Bluetooth > Off. Q: What do I do if the memory is full? A: Delete items from the memory. If Not enough memory to perform operation. Delete some data first. or Memory low. Delete some data from phone memory.
Green tips Q: How do I calibrate the screen? A: The screen is calibrated at the factory. If it is necessary to recalibrate the screen, select Menu > Settings and Phone > Touch input > Touch screen calibration. Follow the instructions.
Product and safety information ● Disable unnecessary sounds, such as keypad and ringing tones. Recycle Most of the materials in a Nokia phone are recyclable. Check how to recycle your Nokia products at www.nokia.com/werecycle, or with a mobile device, www.nokia.mobi/werecycle. Recycle packaging and user guides at your local recycling scheme. Save paper This user guide helps you get started with your device.
Product and safety information Battery Battery and charger information Your device is powered by a rechargeable battery. The battery intended for use with this device is BL-5J. Nokia may make additional battery models available for this device. This device is intended for use when supplied with power from the following chargers: AC-8. The exact charger model number may vary depending on the type of plug. The plug variant is identified by one of the following: E, EB, X, AR, U, A, C, K, or UB.
Product and safety information happen, for example, when you carry a spare battery in your pocket or purse. Shortcircuiting the terminals may damage the battery or the connecting object. Disposal. Do not dispose of batteries in a fire as they may explode. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste. Leak. Do not dismantle, cut, open, crush, bend, puncture, or shred cells or batteries.
Product and safety information 2. When you angle the hologram left, right, down and up, you should see 1, 2, 3 and 4 dots on each side respectively. Successful completion of the steps is not a total assurance of the authenticity of the battery.
Product and safety information ● Do not paint the device. Paint can clog the moving parts and prevent proper operation. ● Use only the supplied or an approved replacement antenna. Unauthorised antennas, modifications, or attachments could damage the device and may violate regulations governing radio devices. ● Use chargers indoors. ● Backup all data you want to keep, such as contacts and calendar notes.
Product and safety information Operating environment This device meets RF exposure guidelines in the normal use position at the ear or at least 1.5 centimetres (5/8 inch) away from the body. Any carry case, belt clip, or holder for body-worn operation should not contain metal and should position the device the above-stated distance from your body. To send data files or messages requires a quality connection to the network. Data files or messages may be delayed until such a connection is available.
Product and safety information ● Hold the wireless device to the ear opposite the medical device. ● Turn the wireless device off if there is any reason to suspect that interference is taking place. ● Follow the manufacturer directions for the implanted medical device. If you have any questions about using your wireless device with an implanted medical device, consult your health care provider. Hearing aids Some digital wireless devices may interfere with some hearing aids.
Product and safety information Areas with a potentially explosive atmosphere are often, but not always, clearly marked. They include areas where you would be advised to turn off your vehicle engine, below deck on boats, chemical transfer or storage facilities and where the air contains chemicals or particles such as grain, dust, or metal powders.
Product and safety information When making an emergency call, give all the necessary information as accurately as possible. Your wireless device may be the only means of communication at the scene of an accident. Do not end the call until given permission to do so. Certification information (SAR) This mobile device meets guidelines for exposure to radio waves. Your mobile device is a radio transmitter and receiver.
Index A A-GPS (assisted GPS) 103 access codes 13 access points 121 groups 122 accessories 144 accounts 72 alarm calendar note 134 alarm clock 133 answering calls 38 antennas 31 application manager 136 settings 138 application settings 144 applications 136 assisted GPS (A-GPS) 103 attachments 58, 61 audio messages 56 auto-update for time/date 133 B backing up device memory barring calls 151 battery inserting 17 saving power 14 blogs 100 Bluetooth 125, 126 Bluetooth connectivity blocking devices 128 164 1
options during 37 received 44 redialling 150 rejecting 38 restricting See fixed dialling settings 150 camera assigning images to contacts 86 image mode 86 indicators 84, 89 location information 87 options 86 recording 90 self-timer 88 sending images 86 sequence mode 88 video mode 89 capture settings in camera 84 cell broadcast messages 63 certificates 146 chat services (IM) 70, 74, 75 clock 133, 134 setting date 133 setting time 133 computer connections 130 See also data connections conference calls 38 cont
Index F inbox, message 57 indicators and icons 29 installing applications 136 internet connection 98 See also browser invitations video sharing 43 factory settings restoring 148 feeds, news 100 file management 135 file manager 135 backing up files 135 organising files 135 fixed dialling 55 J Java applications 136 JME Java application support G K gallery 90 organising 90 viewing 90 viewing images 91 viewing videos 91 general information 11 GPS position requests 105 GPS (Global Positioning System) 103
Maps 107 browsing 108 changing views 109 display elements 109, 117 downloading maps 110 driving routes 116 Favourites 113 finding locations 111 location details 112 navigating 116, 118 organising places 113 organising routes 113 planning routes 118 positioning 110 saving places 112 saving routes 112 sending places 114 sharing locations 114 synchronising 115 traffic information 117 voice guidance 115 walking routes 118 media music player 76 RealPlayer 139 media bar 27 media key 27 memory clearing 15 web cach
Index personalisation 73 presence 72 profiles 68 searching 69 settings 72 sharing your location synchronising 71 Ovi Music 80 Ovi Store 132 P proxy settings 123 PUK codes 13 R 68, 73 packet data connection access point settings 122 counters 45 settings 130 page overview 100 personal certificates 146 personalisation 75 Phone setup 28 photos See camera PIN code 13 PIN2 code 13 podcasting 79 downloads 82 settings 81 positioning information 103 positioning settings 106 presence 72 presentations, multimedia
settings 84, 142, 144 access point name control 131 access points 121, 122 applications 144 Bluetooth connectivity 125 call divert 150 calls 150 certificates 146 date and time 142 display 143 language 143 messages 64 network 120 packet data 130 packet data access points 122 podcasting 81 positioning 106 SIP 131 video centre 97 video sharing 41 Share online 92 accounts 93 activating services 92 creating posts 93 posting 94 subscribing 92 shared video 41 sharing media files online 92 sharing your location 71
Index useful information 11 V video my videos 96 playing video clips 96 shared 43 transferring video clips 97 Video Centre 94 video centre downloading 94 video feeds 96 viewing 94 video clips shared 41 video sharing requirements 41 sharing live video 42 sharing video clips 42 virtual keyboard 46 virtual keypad 48 voice calls See calls voice commands 40, 143 See also voice dialling voice control 143 voice dialling 40 volume controls 33 widgets 100 world clock 134 wrist strap 35 Z zooming 89 W wallpa
