Nokia 5228 User Guide Issue 6.
DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this RM-625 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/ phones/declaration_of_conformity/. © 2010 Nokia. All rights reserved. Nokia, Nokia Connecting People, Nokia Care, and Ovi are trademarks or registered trademarks of Nokia Corporation. Nokia tune is a sound mark of Nokia Corporation.
OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE. Reverse engineering of software in the device is prohibited to the extent permitted by applicable law. Insofar as this user guide contains any limitations on Nokia's representations, warranties, damages and liabilities, such limitations shall likewise limit any representations, warranties, damages and liabilities of Nokia's licensors.
Contents Safety........................................7 About your device..................................8 Network services....................................9 1. Find help.............................10 In-device help.......................................10 Support.................................................10 Update software using your PC..........11 Settings.................................................11 Access codes.........................................11 Prolong battery life.......
Enter text with the virtual keypad.....41 Touch input settings............................44 6. Contacts..............................44 Save and edit names and numbers....44 Contacts toolbar...................................45 Manage names and numbers.............45 Default numbers and addresses.........46 Ringing tones, images, and call text for contacts...........................................46 Copy contacts.......................................47 SIM services......................................
Contents Bluetooth connectivity........................86 USB.........................................................90 PC connections.....................................91 Administrative settings.......................91 15. Search...............................92 About Search........................................92 Start a search........................................92 16. About Ovi Store.................93 17. Other applications............93 Clock..............................................
Safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.
Safety About your device The wireless device described in this guide is approved for use on the GSM/EDGE 850/900/1800/1900 MHz networks. Contact your service provider for more information about networks. Your device supports several connectivity methods and like computers may be exposed to viruses and other harmful content. Exercise caution with messages, connectivity requests, browsing, and downloads.
Network services Safety To use the device you must have service from a wireless service provider. Some features are not available on all networks; other features may require that you make specific arrangements with your service provider to use them. Network services involve transmission of data. Check with your service provider for details about fees in your home network and when roaming on other networks. Your service provider can explain what charges will apply.
1. Find help In-device help Your device contains instructions to help to use the applications in your device. To open help texts from the main menu, select Menu > Help and the application for which you want to read instructions. When an application is open, to access the help text for the current view, select Options > User guide. When you are reading the instructions, to change the size of the help text, select Options > Decrease font size or Increase font size.
Find help If your issue remains unsolved, contact Nokia for repair options. See www.nokia.com/repair. Before sending your device for repair, always back up the data in your device. Update software using your PC Nokia Software Updater is a PC application that enables you to update your device software. To update your device software, you need a compatible PC, broadband internet access, and a compatible USB data cable to connect your device to the PC.
Find help apply, and all the personal data in your device may be deleted. For more information, contact a Nokia Care Point or your device dealer. ● Personal Unblocking Key (PUK) code and PUK2 code — These codes (8 digits) are required to change a blocked PIN code or PIN2 code, respectively. If the codes are not supplied with the SIM card, contact the network service provider whose SIM card is in your device.
Free memory Get started To view how much space is available for different data types, select Menu > Applications > Office > File mgr.. Many features of the device use memory to store data. The device notifies you if the memory in different memory locations is low. To free memory, transfer data to a compatible memory card (if available) or to a compatible computer. To remove data you no longer need, use File manager or open the respective application.
Get started device does not support the use of micro-SIM cards and use of incompatible SIM cards may damage the card or the device, and may corrupt data stored on the card. A SIM card may be already inserted in the device. If not, do the following: 1. Open the cover of the SIM card slot. 2. Insert a SIM card in the SIM card slot. Make sure the contact area on the card is facing up. Push the card in. 3. Close the cover of the SIM card slot. Make sure the cover is properly closed.
Insert the battery Get started Always switch the device off and disconnect the charger before removing the battery. 1. Remove the back cover. 2. Insert the battery. 3. To replace the cover, direct the top locking catches toward their slots, and press down until the cover locks into place. © 2010 Nokia. All rights reserved.
Get started Insert the memory card Use only compatible microSD and microSDHC cards approved by Nokia for use with this device. Nokia uses approved industry standards for memory cards, but some brands may not be fully compatible with this device. Incompatible cards may damage the card and the device and corrupt data stored on the card. 1. Open the cover of the memory card slot. 2. Insert a compatible memory card in the memory card slot. Make sure the contact area on the card is facing up. Push the card in.
3. Close the cover of the memory card slot. Make sure the cover is properly closed. Get started Charge the battery Your battery has been partially charged at the factory. If the device indicates a low charge, do the following: 1. Connect the charger to a wall outlet. 2. Connect the charger to the device. 3. When the device indicates a full charge, disconnect the charger from the device, then from the wall outlet. © 2010 Nokia. All rights reserved.
Get started You do not need to charge the battery for a specific length of time, and you can use the device while it is charging. If the battery is completely discharged, it may take several minutes before the charging indicator appears on the display or before any calls can be made. Tip: Disconnect the charger from the wall outlet when the charger is not in use. A charger that is connected to the outlet consumes power even when it is not connected to the device.
6 — Touch screen 7 — Proximity sensor 8 — Volume/Zoom key 9 — Media key 10 — Lock switch 11 — Capture key 12 — End key 13 — Menu key 14 — Call key Get started 15 — Camera lens 16 — Loudspeaker 17 — SIM card slot 18 — Memory card slot 19 — Wrist strap hole 20 — Microphone © 2010 Nokia. All rights reserved.
Get started Do not cover the area above the touch screen, for example, with protective film or tape. Switch the device on 1. Press and hold the power key. 2. If the device asks for a PIN code or lock code, enter it, and select OK. To delete a number, select . The factory setting for the lock code is 12345. 3. Select your location. If you accidentally select the wrong location, select Back. 4. Enter the date and time. When using the 12-hour time format, to switch between a.m. and p.m., select any number.
Get started Interactive display elements To open the clock application, select the clock (1). To open the calendar, or to change the profile, select the date or the profile name (2). ), or to view To view or modify connectivity settings ( missed events, select the top right corner (3). To make a phone call, select Telephone or To open the contacts list, select Contacts or (4). (5). To open the main menu, press the menu key (6).
Get started Important: Use only a stylus approved by Nokia for use with this device. Using any other stylus may invalidate any warranty applying to the device and may damage the touch screen. Avoid scratching the touch screen. Never use an actual pen or pencil or other sharp objects to write on the touch screen. ● List items in an application, such as the Drafts folder in the folder list in Messaging Tip: When you open a list view, the first item is already highlighted.
Swipe Get started To swipe, slide your finger or the stylus quickly left or right on the screen. When viewing an image, to view the next or previous image, swipe the image left or right, respectively. Swipe to unlock the touch screen — To unlock the touch screen, press the power key or the menu key, and swipe from right to left. Swipe to unlock the touch screen and mute a call — To unlock the touch screen without answering a call, swipe from right to left. The ringing tone is muted automatically.
Get started Media key To open applications such as the music player or browser, select the media key ( ) to open the media bar, and select the application. Change the ringing tone Select Menu > Settings and Personal > Profiles. You can use profiles to set and customise the ringing tones, message alert tones, and other tones for different events, environments, or caller groups. To personalise a profile, go to the profile, and select Options > Personalise.
Nokia Care services Your device If you need to contact Nokia Care services, check the list of local Nokia Care contact centres at www.nokia.com/customerservice. Maintenance For maintenance services, find your nearest Nokia Care point at www.nokia.com/ repair. 3. Your device Phone setup When you switch on your device for the first time, the Phone setup application is displayed. To access the Phone setup application later, select Menu > Applications > Phone setup.
Your device If your old Nokia device does not have the Phone switch application, your new device sends it in a message. Open the message in the old device, and follow the instructions. 1. Select the device you want to connect to, and pair the devices. Bluetooth needs to be activated. 2. If the other device requires a passcode, enter the passcode. The passcode, which you can define yourself, must be entered in both devices. The passcode in some devices is fixed.
Your device All calls to the device are diverted to another number (network service). If you have two phone lines, a number indicates the active line. A compatible headset is connected to the device. A compatible text phone is connected to the device. A GPRS packet data connection is active (network service). connection is on hold and that a connection is available. indicates that the A packet data connection is active in a part of the network that supports EGPRS (network service).
Your device Antenna locations Your device may have internal and external antennas. Avoid touching the antenna area unnecessarily while the antenna is transmitting or receiving. Contact with antennas affects the communication quality and may cause a higher power level during operation and may reduce the battery life. Cellular antenna Bluetooth antenna Offline profile The offline profile lets you use the device without connecting to the wireless cellular network.
Your device the official emergency number programmed into your device. To make calls, you must first activate the phone function by changing profiles. If the device has been locked, enter the lock code. Shortcuts To switch between open applications, press and hold the menu key. Leaving applications running in the background increases the demand on battery power and reduces the battery life. To start a web connection (network service), in the dialler, tap and hold 0.
Your device Sensor settings and display rotation When you activate the sensors in your device, you can control certain functions by turning the device. Select Menu > Settings and Phone > Sensor settings. Select from the following: ● Sensors — Activate the sensors. ● Turning control — Select Silencing calls and Snoozing alarms to mute calls and snooze alarms by turning your device so that the display faces down.
Your device Warning: When you use the headset, your ability to hear outside sounds may be affected. Do not use the headset where it can endanger your safety. Do not connect products that create an output signal as this may cause damage to the device. Do not connect any voltage source to the Nokia AV Connector. When connecting any external device or any headset, other than those approved by Nokia for use with this device, to the Nokia AV Connector, pay special attention to volume levels.
Your device Remove the SIM card 1. Remove the back cover by lifting it from the top end of the device. 2. Remove the battery. 3. Open the cover of the SIM card slot. Place the tip of the stylus in the opening under the battery, and push the SIM card sideways to slide it out of the slot. Pull the SIM card out. 4. Replace the battery and the back cover. Remove the memory card Important: Do not remove the memory card during an operation when the card is being accessed.
4. Press the memory card to release it from the slot. 5. Pull out the memory card. If the device is switched on, select OK. Make calls 4. Make calls Touch screen during calls Your device has a proximity sensor. To extend battery life and prevent accidental selections, the touch screen is disabled automatically during calls, when you place the device next to your ear. Do not cover the proximity sensor, for example, with protective film or tape. Calls 1.
Make calls During a call To mute or unmute the microphone, select or To put a call on hold or activate the held call, select To switch back to the handset, select To end the call, select . . . or . To switch between the active and held calls, select Options > Swap. Tip: When you have only one active voice call, to put the call on hold, press the call key. To activate the held call, press the call key again. To send DTMF tone strings (for example, a password), select Options > Send DTMF.
Make calls Answer or reject a call To answer a call, press the call key. To mute the ringing tone of an incoming call, select . To answer the call when the touch screen is locked, swipe Swipe to answer from left to right. You can send a text message without rejecting the call, informing the caller that you cannot answer the call. To send the reply message, select Send msg., edit the message text, and press the call key. If you do not want to answer a call, press the end key.
Make calls Go to the participant, and select . The conference call is put on hold on your device. The other participants can still continue the conference call. . To return to the conference call, select To drop a participant, select , go to the participant, and select 4. To end the active conference call, press the end key. . Speed dial a phone number To activate speed dialling, select Menu > Settings and Calling > Call > Speed dialling. 1.
Voice dialling Make calls Your device automatically creates a voice tag for the contacts. To listen to the synthesised voice tag, select a contact and Options > Voice tag details. Scroll to a contact detail, and select Options > Play voice tag. Make a call with a voice tag Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialling in all circumstances. When you use voice dialling, the loudspeaker is in use.
Make calls To view missed, received, and dialled calls, select Missed calls, Received calls or Dialled numbers. Tip: To open the dialled numbers list in the home screen, press the call key. On the toolbar, select from the following: ● ● ● Call — Call the desired contact. Create message — Send a message to the desired contact. Open Contacts — Open the contacts list. Select Options and from the following: ● Save to Contacts — Save the highlighted phone number from a recent calls list to your contacts.
Monitor all communication events Write text Select Menu > Log. To open the general log where you can monitor all voice calls, text messages, or data connections registered by the device, select the general log tab . Subevents, such as a text message sent in more than one part and packet data connections, are logged as one communication event. Connections to your mailbox, multimedia message centre, or web pages are shown as packet data connections.
Write text Virtual keyboard You can use the virtual keyboard in landscape mode. To activate the virtual keyboard, select > Full screen QWERTY. When using the virtual keyboard in full screen mode, you can select keys with your fingers. 1 — Close - Close the virtual keyboard. 2 — Input menu - Open the touch input options menu to access commands such as Writing language. To add an emoticon, select Insert emoticon.
Write text 12 — Input mode - Select the input method. When you tap an item, the current input method view closes, and the selected one opens. Handwriting The input methods and languages supported by the handwriting recognition vary by region and may not be available for all languages. To activate handwriting mode, select > Handwriting. Write legible, upright characters on the text input area, and leave a space between each character.
Write text 1 — Close - Closes the virtual keypad (Alphanumeric keypad). 2 — Input menu - Opens the touch input menu, which includes commands such as Activate predictive text and Writing language. To add an emoticon, select Insert emoticon. 3 — Text input indicator - Opens a pop-up window, in which you can activate or deactivate predictive text input modes, change the character case, and switch between letter and number modes. 4 — Input mode - Opens a pop-up window, in which you can select the input mode.
Write text 8 — Star - Opens a special characters table. 9 — Shift - Changes the character case, activates or deactivates predictive text input modes, and switches between letter and number modes. Traditional text input Tap a number key (1-9) repeatedly until the desired character appears. There are more characters available for a number key than are visible on the key.
Contacts Touch input settings Select Menu > Settings and Phone > Touch input. To modify text input settings for the touch screen, select from the following: ● Handwriting training — Open the handwriting training application. Train the device to recognise your handwriting better. This option is not available in all languages. ● Writing language — Define which language-specific characters in your handwriting are recognised and how the virtual keyboard is laid out. ● Writing speed — Select the writing speed.
To edit contacts, select a contact and Options > Edit. Contacts Contacts toolbar On the contacts list toolbar, select from the following: ● ● ● Call — Call the desired contact. Create message — Send a message to the desired contact. New contact — Create a new contact. Manage names and numbers To copy or delete a contact, or to send a contact as a business card to another device, tap and hold a contact, and select Copy, Delete, or Send business card.
Contacts Default numbers and addresses You can assign default numbers or addresses to a contact. If a contact has several numbers or addresses, you can easily call or send a message to a certain number or address. The default number is also used in voice dialling. 1. In the contacts list, select a contact. 2. Select Options > Defaults. 3. Select a default to which you want to add a number or an address, and select Assign. 4. Select a number or an address you want to set as a default. 5.
Copy contacts Contacts When you open the contacts list for the first time, the device asks if you want to copy names and numbers from the SIM card to your device. To start copying, select OK. If you do not want to copy the contacts from the SIM card to your device, select Cancel. The device asks if you want to view the SIM card contacts in the contacts directory. To view the contacts, select OK. The contacts list opens, and the names .
Messaging When security features that restrict calls are in use (such as call barring, closed user group, and fixed dialling), calls may be possible to the official emergency number programmed into your device. Call barring and call diverting cannot be active at the same time. You need your PIN2 code to activate and deactivate fixed dialling or edit your fixed dialling contacts. Contact your service provider for your PIN2 code.
Messaging ● ● ● ● ● Mailbox — Connect to your remote mailbox to retrieve your new e-mail messages, or view your previously retrieved e-mail messages offline. Drafts — Draft messages that have not been sent are stored here. Sent — The last messages that have been sent, excluding messages sent using Bluetooth connectivity, are stored here. You can change the number of messages to save in this folder.
Messaging Send a text or multimedia message — Select New message. Send an audio or mail message — Select Options > Create message, and the relevant option. Select recipients or groups from the contacts list — Select from the toolbar. Enter the number or mail address manually — Tap the To field. Enter the subject of the mail or multimedia message — Enter it in the Subject field. If the Subject field is not visible, select Options > Message header fields to change the fields that are visible.
Messaging Multimedia messages Important: Exercise caution when opening messages. Messages may contain malicious software or otherwise be harmful to your device or PC. You may receive a notification that a multimedia message is waiting in the multimedia message centre. To start a packet data connection to retrieve the message to your device, select Options > Retrieve. When you open a multimedia message ( ), you may see an image and a message. is shown if sound is included, or if video is included.
Messaging To set up e-mail from your home screen, select the relevant plug-in. Alternatively, to set up an e-mail account, select Menu > Applications > Sett. wizard. E-mail service The e-mail service on your Nokia device automatically transfers e-mail from your existing e-mail address to your device. You can read, respond to, and organise your e-mails on the go. The service works with a number of internet e-mail providers that are often used for personal e-mail.
Open the mailbox Messaging Select Menu > Messaging and a mailbox. When you open the mailbox, the device asks if you want to connect to the mailbox. To connect to your mailbox and retrieve new e-mail headers or messages, select Yes. When you view messages online, you are continuously connected to a remote mailbox using a data connection. To view previously retrieved e-mail messages offline, select No. To create a new e-mail message, select Options > Create message > E-mail.
Messaging To view e-mail attachments, open the message, and select the attachment field indicated by . If the attachment has not been retrieved to the device, select Options > Retrieve. To retrieve e-mail messages automatically, select Options > E-mail settings > Automatic retrieval. Setting the device to retrieve e-mail automatically may involve the transmission of large amounts of data through your service provider's network. Contact your service provider for information about data transmission charges.
Mail for Exchange Messaging With Mail for Exchange, you can receive your work e-mail to your device. You can read and reply to your e-mails, view and edit compatible attachments, view calendar information, receive and reply to meeting requests, schedule meetings, and view, add, and edit contact information. ActiveSync Use of the Mail for Exchange application is limited to over-the-air synchronisation of PIM information between the Nokia device and the authorised Microsoft Exchange server.
Messaging View messages on a SIM card Select Menu > Messaging and Options > SIM messages. Before you can view SIM messages, you must copy them to a folder in your device. 1. Select Options > Mark/Unmark > Mark or Mark all to mark messages. 2. Select Options > Copy. A list of folders opens. 3. To start copying, select a folder. To view the messages, open the folder. Cell broadcast messages Select Menu > Messaging and Options > Operator messages.
Text message settings Messaging Select Menu > Messaging and Options > Settings > Text message. Select from the following: ● Message centres — View a list of all text message centres that have been defined. ● Message centre in use — Select which message centre to use to deliver text messages. ● Character encoding — To use character conversion to another encoding system when available, select Reduced support.
Messaging ● Multimedia retrieval — Select how you want to receive messages, if available. To receive messages automatically in your home network, select Auto in home netw.. Outside your home network, you receive a notification that there is a message to retrieve in the multimedia message centre. If you select Always automatic, your device automatically makes an active packet data connection to retrieve the message both in and outside your home network.
Messaging To create a new mailbox, select Mailboxes > Options > New mailbox. The name you give to the new mailbox replaces Mailbox in the Messaging main view. You can have up to six mailboxes. Select Mailboxes and a mailbox to change the connection settings, user settings, retrieval settings, and automatic retrieval settings. Chat About Chat Select Menu > Applications > Chat. With Chat (network service), you can exchange instant messages with your friends.
Personalise your device 8. Personalise your device You can personalise your device by changing the home screen, tones, or themes. Change the look of your device Select Menu > Settings and Personal > Themes. You can use themes to change the look of the display, such as wallpaper and main menu layout. To change the theme that is used for all the applications in your device, select General. To preview a theme before activating it, scroll to the theme, and wait for a few seconds.
Music To set the profile to be active until a certain time within the next 24 hours, scroll to the profile, select Options > Timed, and set the time. When the time expires, the profile changes back to the previously active non-timed profile. When the profile is timed, is displayed in the home screen. The Offline profile cannot be timed. To create a new profile, select Options > Create new. 9. Music Music player Music player supports file formats such as AAC, AAC+, eAAC+, MP3, and WMA.
Music To fast-forward or rewind, select and hold or . . To return to the To go to the next item, select beginning of the item, select . To skip to the previous again within 2 seconds after a song or item, select podcast has started. To activate or deactivate random play ( Options > Shuffle play. ), select To repeat the current item ( ), all items ( ), or to deactivate repeat, select Options > Repeat. If you play podcasts, shuffle and repeat are automatically deactivated.
Music 4. If you select Yes, select artists to find the songs you want to add to the playlist. Select Add to add items. To show the song list under an artist title, select Expand. To hide the song list, select Collapse. 5. When you have made your selections, select Done. If a compatible memory card is inserted, the playlist is saved to the memory card. To add more songs later, when viewing the playlist, select Options > Add songs.
Music ● To view your device on a computer as a mass memory device where you can transfer any data files, make the connection with a compatible USB data cable or Bluetooth connectivity. If you are using a USB data cable, select Mass storage as the connection mode. A compatible memory card must be inserted in the device. ● To synchronise music with Windows Media Player, connect a compatible USB data cable, and select Media transfer as the connection mode.
Music Downloading music may involve additional costs and the transmission of large amounts of data (network service). For information about data transmission charges, contact your network service provider. To access Ovi Music, you must have a valid internet access point in the device. You may be asked to select the access point to use when connecting to Ovi Music. Select the access point — Select Default access point. The availability and appearance of Ovi Music settings may vary.
Music ● Search service URL — Define the podcast search service URL to be used in searches. Download settings To edit the download settings, select Options > Settings > Download and from the following: ● Save to — Define the location where you want to save your podcasts. ● Update interval — Define how often podcasts are updated. ● Next update date — Define the date of the next automatic update. ● Next update time — Define the time of the next automatic update.
Music To start a download, select the episode title. To download or to continue to download selected or marked episodes, select Options > Download. You can download multiple episodes at the same time. To play a portion of a podcast during download or after partial downloading, select the podcast and Options > Play preview. Fully downloaded podcasts can be found in the Podcasts folder, but are not shown until the library is refreshed. Radio Listen to the radio Select Menu > Music > Radio.
Camera Manage radio stations Select Menu > Music > Radio. To listen to saved stations, select Options > Stations, and select a station from the list. To remove or rename a station, select Options > Stations > Options > Delete or Rename. To set the desired frequency manually, select Options > Tune stations > Options > Manual tuning. 10. Camera Your device supports an image capture resolution of 1600x1200 pixels. The image resolution in this guide may appear different.
Camera 3 — Capture icon 4 — Capture settings 5 — Battery charge level indicator 6 — Image resolution indicator 7 — Image counter (the estimated number of images you can capture using the current image quality setting and available memory) 8 — Memory in use. Depending on the setup of your device, there are the following ).
Camera — Adjust the white balance. Select the current lighting conditions. This allows the camera to reproduce colours more accurately. — Adjust the exposure compensation (images only). If you are shooting a dark subject against a very light background, such as snow, adjust the exposure to +1 or +2 to compensate for the background brightness. For light subjects against a dark background, use -1 or -2. — Adjust light sensitivity (images only).
Camera 2. To capture an image, press the capture key. Do not move the device before the image is saved and the final image displayed. To zoom in or out when capturing an image, use the zoom slider. To leave the camera open in the background and use other applications, press the menu key. To return to the camera, press and hold the capture key.
Camera To switch off the self-timer, select > > . Tip: Select 2 seconds to keep your hand steady when capturing an image. Capture images in a sequence Select Menu > Applications > Camera. To start capturing images in a quick sequence, select Menu > Applications > > Sequence. To close the settings window, tap the screen above Camera and the window. Press and hold the capture key. The device captures images until you release the key or until the memory runs out.
Camera 4. To stop recording, press the capture key. The video clip is automatically saved in Gallery. The maximum length of a video clip is approximately 30 seconds with sharing quality and 90 minutes with other quality settings. Video recording controls and indicators The video viewfinder displays the following: 1 — Mode indicator 2 — Audio mute indicator 3 — Record icon 4 — Recording settings 5 — Battery charge level indicator 6 — Video quality indicator.
Gallery ● ● Play — Play the video clip you just recorded. Delete — Delete the video clip. To return to the viewfinder to record a new video clip, press the capture key. 11. Gallery To store and organise your images, video clips, sound clips, and streaming links, select Menu > Gallery. Tip: To access the images and video clips view quickly, tap the media key ( ) to open the media bar, and select .
Gallery The images, video clips, and folders are ordered by date and time. To browse the files, swipe up or down. To open a file, select a file from the list. When viewing an image, to view the next or previous image, swipe the image left or right, respectively. To zoom in an image, use the volume key in your device. Select Options and from the following: ● Edit — Edit a video clip or an image. ● Use file — To use the image as wallpaper in the home screen, select Set as wallpaper.
Nokia Video Centre ● View by — View files by date, title, or size. 12. Nokia Video Centre With Nokia Video Centre (network service), you can download and stream video clips over the air from compatible internet video services using a packet data connection. You can also transfer video clips from a compatible PC to your device and view them in Video centre. Using packet data access points to download videos may involve the transmission of large amounts of data through your service provider's network.
Nokia Video Centre continue in the background if you exit the application. The downloaded video clips are saved in My videos. To stream a video clip or view a downloaded one, select Options > Play. When the video clip is playing, to use the control keys for controlling the player, tap the screen. To adjust the volume, use the volume key. Warning: Continuous exposure to high volume may damage your hearing.
Nokia Video Centre The content of the installed video services is distributed using RSS feeds. To view and manage your feeds, select Video feeds. Select Options and from the following: ● Feed subscriptions — Check your current feed subscriptions. ● Feed details — View information about a video. ● Add feed — Subscribe to new feeds. Select Via Video directory to select a feed from the services in the video directory. ● Refresh feeds — Refresh the content of all feeds.
Nokia Video Centre 1. To view your device on a PC as a mass memory device where you can transfer any data files, connect using a USB data cable. 2. Select Mass storage as the connection mode. A compatible memory card needs to be inserted in the device. 3. Select the video clips you want to copy from your PC. 4. Transfer the video clips to E:\My Videos in the memory card. The transferred video clips appear in the My videos folder.
Internet 13. Internet About the web browser Select Menu > Internet > Web. Catch up on the news and visit your favourite websites. You can use your device web browser to view web pages on the internet. To browse the web, you must have an internet access point configured in your device and be connected to a network. Browse the web Select Menu > Internet > Web. Go to a website — Select the web address bar, enter a web address, and select .
Connectivity Go to a bookmarked website while browsing — Select bookmark. > and a Subscribe to a web feed You don't have to visit your favourite websites regularly to keep up with what's new on them. You can subscribe to web feeds and get links to latest content automatically. Select Menu > Internet > Web. . They are used to share, for Web feeds on web pages are usually indicated with example, the latest news headlines or blog entries.
Connectivity Check the type of access point you need with your service provider for the service you want to access. For availability and subscription to packet data connection services, contact your service provider. Network settings Select Menu > Settings and Connectivity > Network. Select from the following: ● Operator selection — Select Automatic to set the device to search for and select one of the available networks, or Manual to manually select the network from a list.
Connectivity shown and can be shared by a new access point. If you skip this step, you are asked to select a connection method and to define the settings needed. To edit the settings of an access point, open one of the access point groups, and select an access point. Follow the instructions from your service provider. ● Connection name — Enter a name for the connection. ● Data bearer — Select the data connection type. Depending on the data connection you select, only certain setting fields are available.
Connectivity To edit a packet data access point, open one of the access point groups, and select an access point marked with . Follow the instructions from your service provider. Select from the following: ● Access point name — You obtain the access point name from your service provider. ● User name — The user name may be needed to make a data connection, and is usually provided by your service provider.
Active data connections Connectivity Select Menu > Settings and Connectivity > Connection mgr.. In the active data connections view, you can see open data connections: data calls packet data connections To end a connection, select Options > Disconnect. To end all open connections, select Options > Disconnect all. To view the details of a connection, select Options > Details. Synchronisation Select Menu > Settings and Connectivity > Data transfer > Sync.
Connectivity Bluetooth connectivity About Bluetooth connectivity With Bluetooth connectivity, you can make a wireless connection to other compatible devices, such as mobile devices, computers, headsets, and car kits. You can use the connection to send images, video and sound clips, and notes, transfer files from your compatible PC, and print images with a compatible printer. Since devices with Bluetooth wireless technology communicate using radio waves, they do not need to be in direct line-of-sight.
Connectivity which the visibility is set from shown to hidden, select Set visibility period. To hide your device from other devices, select Hidden. ● My phone's name — Edit the name shown to other devices with Bluetooth wireless technology. ● Remote SIM mode — Enable or disable another device, such as a compatible car kit accessory, to use the SIM card in your device to connect to the network. Security tips Select Menu > Settings and Connectivity > Bluetooth.
Connectivity 3. Select the device with which you want to connect. 4. If the other device requires pairing before data can be transmitted, a tone sounds, and you are asked to enter a passcode. The same passcode must be entered in both devices. When the connection is established, Sending data is displayed. Tip: When searching for devices, some devices may show only the unique address (device address). To find the unique address of your device, enter *#2820#.
Connectivity such as your compatible headset or PC, or devices that belong to someone you trust. indicates authorised devices in the paired devices view. ● Set as unauthorised — Connection requests from this device must be accepted separately every time. To cancel a pairing with a device, select Options > Delete. To cancel all pairings, select Options > Delete all.
Connectivity Before the remote SIM mode can be activated, the two devices must be paired and the pairing initiated from the other device. When pairing, use a 16-digit passcode, and set the other device as authorised. To use the remote SIM mode with a compatible car kit accessory, activate Bluetooth connectivity, and enable the use of the remote SIM mode with your device. Activate the remote SIM mode from the other device.
To have the device ask the purpose of the connection each time a compatible data cable is connected, select Ask on connection > Yes. If the Ask on connection option is deactivated or you want to change the mode during an active connection, select USB connection mode and from the following: ● Ovi Suite — Use Nokia PC applications such as Nokia Ovi Suite, and Nokia Software Updater. ● Mass storage — Transfer data between your device and a compatible PC.
Search ● Packet data connection — If you select When available and you are in a network that supports packet data, the device registers to the packet data network. Starting an active packet data connection (for example, to send and receive e-mail) is quicker than if the device establishes a packet data connection when needed. If there is no packet data coverage, the device periodically tries to establish a packet data connection.
About Ovi Store To change the country or region setting to find more search providers, select Options > Settings > Country or region. 16. About Ovi Store In Ovi Store, you can download mobile games, applications, videos, images, themes, and ringing tones to your device. Some items are free of charge; others you need to pay for with your credit card or in your phone bill. The availability of payment methods depends on your country of residence and your network service provider.
Other applications To remove an alarm, select Alarms, scroll to the alarm, and select Options > Delete alarm. To turn off the alarm when the alarm expires, select Stop. To snooze the alarm, select Snooze. If your device is switched off when an alarm expires, your device switches itself on and starts sounding the alarm tone. To define the snooze time, select Options > Settings > Alarm snooze time. To change the alarm tone, select Options > Settings > Clock alarm tone.
Calendar toolbar Other applications From the toolbar, select from the following: ● ● ● ● ● ● Next view — Select the month view. Next view — Select the week view. Next view — Select the day view. Next view — Select the to-do view. New meeting — Add a new meeting reminder. New to-do note — Add a new to-do note. File manager About File manager Select Menu > Applications > Office > File mgr..
Other applications Rename or format a memory card — Select Options > Memory card options and the desired option. Password protect a memory card — Select Options > Memory card password. These options are available only if a compatible memory card is inserted in the device. Back up files on a memory card Select Menu > Applications > Office > File mgr.. To back up files, select the file types you want to back up on a memory card and Options > Back up now.
Other applications e-mail attachment, or using other connectivity methods, such as Bluetooth connectivity. You can use Nokia Application Installer in Nokia Ovi Suite to install an application to your device.
Other applications To install an application, do the following: 1. To locate an installation file, select Menu > Settings and Application mgr.. Alternatively, search installation files using File manager, or select Messaging > Inbox, and open a message that contains an installation file. 2. In Application manager, select Options > Install. In other applications, select the installation file to start the installation. During installation, the device shows information about the progress of the installation.
Other applications If you remove software, you can only reinstall it if you have the original software package or a full backup of the removed software package. If you remove a software package, you may no longer be able to open documents created with that software. If another software package depends on the software package that you removed, the other software package may stop working. Refer to the documentation of the installed software package for details.
Other applications ● ● Delete — Delete the video clip or streaming link. Remove — Remove a file from the recently played list. Play video clips Select Menu > Applications > RealPlayer. To play a video clip, select Video clips, and a clip. To list recently played files, in the application main view, select Recently played. In the list of video clips, scroll to a clip, select Options and from the following: ● Use video clip — Assign a video to a contact or set it as a ringing tone.
Other applications connects to the site and starts loading the content. The content is not saved in your device. Recorder Select Menu > Music > Recorder. With the Recorder application, you can record voice memos and telephone conversations. The recorder cannot be used when a data call or GPRS connection is active. To record a sound clip, select . To stop recording a sound clip, select To listen to the sound clip, select . .
Settings Converter With Converter, you can convert measures from one unit to another. The converter has limited accuracy, and rounding errors may occur. Select Menu > Applications > Office > Converter. Dictionary Select Menu > Applications > Office > Dictionary. To translate words from one language to another, enter text in the search field. As you enter text, suggestions of words to translate are displayed. To translate a word, select the word from the list. All languages may not be supported.
Settings Time zone — Select your location. Date — Enter the date. Date format — Select the date format. Date separator — Select the symbol that separates days, months, and years. Time format — Select the time format. Time separator — Select the symbol that separates hours and minutes. Clock type — Select the clock type. Clock alarm tone — Select the tone for the alarm clock. Alarm snooze time — Adjust the snooze time. Workdays — Select your working days.
Settings Voice commands To activate enhanced voice commands, to start applications and profiles, press and hold the call key in the home screen. To control your device with enhanced voice commands, press and hold the call key in the home screen, and say a voice command. The voice command is the name of the application or profile displayed in the list. Select Menu > Settings and Phone > Voice commands. Select Options and from the following: ● Change command — Edit the voice commands.
Settings In application settings, you can edit the settings of some of the applications in your device. To edit the settings, you can also select Options > Settings in each application. Device updates Select Menu > Settings and Phone > Phone mgmt. > Device updates. With Device updates, you can connect to a server and receive configuration settings for your device, create new server profiles, view existing software version and device information, or view and manage existing server profiles.
Settings ● ● ● ● ● ● PIN2 code, contact your service provider. If you forget the lock code, contact a Nokia Care point or your service provider. Lock code — The lock code is used to unlock the device. To avoid unauthorised use of your device, change the lock code. The preset code is 12345. The new code can be 4-255 characters long. Alphanumeric characters and both uppercase and lowercase characters can be used. The device notifies you if the lock code is not properly formatted.
Settings Digital certificates do not guarantee safety; they are used to verify the origin of software. Important: Even if the use of certificates makes the risks involved in remote connections and software installation considerably smaller, they must be used correctly in order to benefit from increased security. The existence of a certificate does not offer any protection by itself; the certificate manager must contain correct, authentic, or trusted certificates for increased security to be available.
Settings ● Symbian installation: Yes — The certificate is able to certify the origin of a new Symbian operating system application. ● Internet: Yes — The certificate is able to certify servers. ● App. installation: Yes — The certificate is able to certify the origin of a new Java application. To change the value, select Options > Change trust setting. Security module Select Menu > Settings and Phone > Phone mgmt. > Security settings > Security module.
Settings ask that such DRM software's ability to access new DRM-protected content be revoked. Revocation may also prevent renewal of such DRM-protected content already in your device. Revocation of such DRM software does not affect the use of content protected with other types of DRM or the use of non-DRM-protected content. Digital rights management (DRM) protected content comes with an associated activation key that defines your rights to use the content.
Settings Call settings Call settings With call settings, you can define call specific settings in your device. Select Menu > Settings and Calling > Call. Select from the following: ● Send my caller ID — Select Yes to show your phone number to the person you are calling. To use the setting agreed upon with your service provider, select Set by network (network service).
Call divert Settings Select Menu > Settings and Calling > Call divert. Call divert allows you to divert incoming calls to your voice mailbox or another phone number. For details, contact your service provider. 1. Select the type of calls to divert and a diverting option. For example, to divert all voice calls, select Voice calls > All voice calls. 2. To activate call divert, select Activate. 3. To divert calls to your voice mailbox, select To voice mailbox. 4.
Troubleshooting 19. Troubleshooting To view frequently asked questions about your device, see the product support pages at www.nokia.com/support. Q: What is my password for the lock, PIN, or PUK codes? A: The default lock code is 12345. If you forget the lock code, contact your device dealer. If you forget a PIN or PUK code, or if you have not received such a code, contact your network service provider.
Q: Why can’t I end a Bluetooth connection? Troubleshooting A: If another device is connected to your device, you can end the connection from the other device or deactivate Bluetooth connectivity in your device. Select Menu > Settings and Connectivity > Bluetooth > Bluetooth > Off. Q: What do I do if the memory is full? A: Delete items from the memory. If Not enough memory to perform operation. Delete some data first. or Memory low. Delete some data from phone memory.
Protect the environment Q: How do I calibrate the screen? A: The screen is calibrated at the factory. If it is necessary to recalibrate the screen, select Menu > Settings and Phone > Touch input > Touch screen calibration. Follow the instructions.
Product and safety information Recycle packaging and user guides at your local recycling scheme. The crossed-out wheeled-bin symbol on your product, battery, literature, or packaging reminds you that all electrical and electronic products, batteries, and accumulators must be taken to separate collection at the end of their working life. This requirement applies in the European Union. Do not dispose of these products as unsorted municipal waste.
Product and safety information If a battery is being used for the first time or if the battery has not been used for a prolonged period, it may be necessary to connect the charger, then disconnect and reconnect it to begin charging the battery. If the battery is completely discharged, it may take several minutes before the charging indicator appears on the display or before any calls can be made. Safe removal. Always switch the device off and disconnect the charger before removing the battery.
Product and safety information especially on a hard surface, and you believe the battery has been damaged, take it to a service centre for inspection before continuing to use it. Never use any charger or battery that is damaged. Keep your battery out of the reach of small children. Taking care of your device Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage. ● Keep the device dry.
Product and safety information wet, remove the battery, and allow the device to dry completely before replacing it. ● Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged. ● Do not store the device in high or cold temperature. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.
Product and safety information and how to recycle your Nokia products at www.nokia.com/werecycle, or with a mobile device, nokia.mobi/werecycle. Additional safety information Small children Your device and its accessories are not toys. They may contain small parts. Keep them out of the reach of small children. Operating environment This device meets RF exposure guidelines in the normal use position at the ear or at least 1.5 centimetres (5/8 inch) away from the body.
Product and safety information Implanted medical devices Manufacturers of medical devices recommend a minimum separation of 15.3 centimetres (6 inches) between a wireless device and an implanted medical device, such as a pacemaker or implanted cardioverter defibrillator, to avoid potential interference with the medical device. Persons who have such devices should: ● Always keep the wireless device more than 15.3 centimetres (6 inches) from the medical device.
Product and safety information Switch off your device before boarding an aircraft. The use of wireless teledevices in an aircraft may be dangerous to the operation of the aircraft and may be illegal. Potentially explosive environments Switch off your device in any area with a potentially explosive atmosphere. Obey all posted instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or death.
Product and safety information ● If the screen and keys are locked, slide the lock switch on the side of the device to unlock them. 2. Press the end key as many times as needed to clear the display and ready the device for calls. 3. To open the dialler, select Telephone or . 4. Enter the official emergency number for your present location. Emergency numbers vary by location. 5. Press the call key. When making an emergency call, give all the necessary information as accurately as possible.
Product and safety information Use of device accessories may result in different SAR values. SAR values may vary depending on national reporting and testing requirements and the network band. Additional SAR information may be provided under product information at www.nokia.com. © 2010 Nokia. All rights reserved.
Index A access codes 11 access points 82 groups 83 accessories 104 alarm calendar note 94 alarm clock 93 answering calls 35 antennas 28 application manager 96 settings 99 application settings 104 applications 96 attachments 51, 54 audio messages 49 auto-update for time/date B backing up device memory barring calls 111 battery inserting 15 saving power 12 blogs 81 Bluetooth 86, 87 Bluetooth connectivity blocking devices 89 device address 88 device visibility 87 pairing devices 88 124 receiving data 89 se
image mode 70 indicators 68, 73 recording 73 self-timer 71 sending images 71 sequence mode 72 video mode 72 capture settings in camera 69 cell broadcast messages 56 certificates 106 chat services (IM) 59 clock 93, 94 setting date 93 setting time 93 computer connections 91 See also data connections conference calls 35 contacts 45 copying 25, 47 defaults 46 deleting 45 editing 44 images in 44 overview 44 ringing tones 46 saving 44 sending 45 synchronising 85 voice tags 45 contacts bar 27 copying content 25 co
Index G L gallery 74 organising 74 viewing 74 viewing images 74 viewing videos 74 general information 10 language settings 103 licences 108 lock code 11 lock switch 20 locking device with SMS 30 locking the keys 20 loudspeaker 29 H M headset 30 help application 10 home screen 20 I IM (instant messaging) 59 images 75 inbox message 50 inbox, message 50 indicators and icons 26 installing applications 96 internet See web browser J Java applications 96 JME Java application support K keypad lock 20 k
multimedia messages music player 61 playlists 62 muting sound 35 49, 51, 57 N network settings 82 news feeds 81 Nokia Care 24 Nokia Ovi Player 63, 64 Nokia support information notes 101 notification light 109 10 O offline profile 28 outbox, message 49 Ovi Music 64 Ovi Store 93 P packet data connection access point settings 83 counters 38 settings 91 personal certificates 106 personalisation 60 Phone setup 25 Phone switch 25 photos See camera pictures copying 25 © 2010 Nokia. All rights reserved.
Index security certificates 106 security code 11 security module 108 self-timer camera 71 sensor settings 30 sent messages folder 49 service commands 56 service messages 51 settings 69, 102, 104 access points 82, 83 applications 104 Bluetooth connectivity 86 call divert 111 calls 110 certificates 106 date and time 102 display 103 language 103 messages 57 network 82 packet data 91 packet data access points 83 podcasting 65 video centre 79 SIM card inserting 13 messages 56 removing 32 SIM card security 105 S
video centre downloading 76 video feeds 77 viewing 76 video clips my videos 78 playing 78 videos 75 copying 25 virtual keyboard 40 virtual keypad 41 voice calls See calls voice commands 37, 104 See also voice dialling voice control 104 voice dialling 37 volume controls 29 Index W wallpaper 60 web browser 80 bookmarks 80 browsing pages 80 cache memory 80 web feeds 81 week settings 94 world clock 94 wrist strap 31 Z zooming 72 © 2010 Nokia. All rights reserved.
