User Guide

NSM–5
Disassembly & Troubleshooting Instructions
PAMS Technical Documentation
Page 6
Issue 1 02/2002
 Nokia Corporation
Drive size is torx plus 6.
Tightening torque is 17 Ncm.
In assembly check that PWB is not bent.
Remove the UI module.
Remove the frame screws (6 pcs) starting
from number 1 (bottom left).
NOTE: In assembly use reversed order.
NOTE: When assembling the screws,
use 17 Ncm torque.
1.
2. 3.
4.
UI module can now be separated from
the main frame/system module.
6.
5.
3.
UI module and system PWB apart.