User Guide

PAMS
Technical Documentation
NSB–1/3
Service Software Instructions
Page 57
Original 06/98
Close button (ESC):
Closes the dialog box and
does not start flashing.
Load I
mage... button (ALT+I):
Opens Open File dialog, with which user can select a image
file to be flashed to ME. If user selects OK button, the name of
selected file is copied to Flash Image edit field.
Load Ppm... button (ALT+P):
Opens Open File dialog, with which user can select a PPM
package file to be flashed to ME. If user selects OK button, the
name of selected file is copied to PPM Image edit field.
LPT Port list box:
User can select parallel port to be used when flashed.
Blonde files check box:
When control is checked, application searches from file
blonde.ini for section corresponding product and HW version
(e.g
[NSB–3_2304] ). If section is found and contains entries
Ppm and Image, those files are loaded for flashing.
[NSB–3_2502]
Ppm=
ppm_file_path
Image= image_file_path
Blonde settings are checked when dialog is opened and check box status
tells, is there blonde settings for current phone.
Notice: if user wants to load other files than succested in
blonde.ini file, then Blonde files check box must be un-
checked.
During flashing status dialog is showed. After phone is flashed current
time in PC is set to phone and user is asked to check that the time is cor-
rect.