User Guide

PAMS
Technical Documentation
NSB–1/3
Service Software Instructions
Page 56
Original 06/98
F
lash Phone... command
Activation Status Bar Text
Alt, S,F Open service Flash dialog box
This command is used for flashing new software into the phone. Function
opens the following Flash dialog box. When flashing is started, waiting
window is showed to tell the user approximated flashing time.
Dialog mode: modal
Flash dialog box has following items:
Flash Image edit field (read only):
Displays path of image file to be flashed.
PPM Image edit field (read only):
Displays path of PPM package file to be flashed.
PPM Version edit field (read only):
MCU SW version string of the PPM package.
PPM File Version edit field (read only):
Lists the file versions of PPM package.
Fl
ash button (ENTER):
Starts flashing of selected file to phone. Before flashing asks,
does user want to save all user settings to file (and load them
after flashing). If reading user settings to ME or writing them to
ME failed, Restore Default User Settings dialog is opened and
user can restore default settngs to phone. See Error! Refer-
ence source not found.