User Guide

PAMS
Technical Documentation
NSB–1/3
Service Software Instructions
Page 27
Original 06/98
4. Measurement with low input level is executed
5. The RX Calibration dialog will be updated when previous steps are
done.
Dialog mode: modal
RX Calibration dialog has the following items:
AFC information box:
Shows AFC init value, AFC slope and PSW slope values.
AGC List box (ALT+A):
AGC, DAC, Voltage and Difference. The difference column shows the dif-
ference between tuned DAC values and mean straight line calculated
from part slopes in dBs (see /1/). This can be calculated when all mea-
surement results have been received from phone.
Repeat button (ALT+R):
The measurement can be started again by pressing this button.
Save button (ALT+S):
Dialog is closed and tuning
is saved to phone.
Cancel button (ESC):
Dialog is closed and tuning
is not saved to phone.