User guide Nokia 5140i 9238054 Issue 1
DECLARATION OF CONFORMITY We, NOKIA CORPORATION, declare under our sole responsibility that the product RM-104 is in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found from http://www.nokia.com/phones/declaration_of_conformity/. The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of life.
This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information which has been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and non-commercial activity and (ii) for use in connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use.
Contents For your safety .................................................................................................. 13 General information.......................................................................................... 17 Overview of functions ............................................................................................................................. 17 Access codes ............................................................................................................
Keypad lock (keyguard)........................................................................................................................... 32 3. Call functions ................................................................................................ 33 Make a call................................................................................................................................................. 33 Speed dialing.......................................................................
Folders.......................................................................................................................................................... 49 Instant messages (IM)............................................................................................................................. 50 Access the instant messaging menu ............................................................................................... 50 Connect to the instant messaging service........................
Message counter....................................................................................................................................... 63 7. Contacts ......................................................................................................... 64 Search for a contact ................................................................................................................................ 64 Save names and phone numbers ......................................................
9. Settings ......................................................................................................... 75 Profiles......................................................................................................................................................... 75 Themes......................................................................................................................................................... 75 Tones .........................................................
Listen to the radio................................................................................................................................. 91 Recorder ...................................................................................................................................................... 93 Record sound.......................................................................................................................................... 93 List of recordings.........................
Countdown timer................................................................................................................................... 108 Audio message ....................................................................................................................................... 108 Thermometer........................................................................................................................................... 109 15. Organiser .....................................
17. Web............................................................................................................ 122 Set up browsing ..................................................................................................................................... Connect to a service ............................................................................................................................. Browse pages...................................................................................
20. Battery information.................................................................................. 136 Charging and discharging ................................................................................................................... 136 Nokia battery authentication guidelines........................................................................................ 137 CARE AND MAINTENANCE.............................................................................
For your safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.
USE SENSIBLY Use only in the normal position as explained in the product documentation. Do not touch the antenna unnecessarily. QUALIFIED SERVICE Only qualified personnel may install or repair this product. ENHANCEMENTS AND BATTERIES Use only approved enhancements and batteries. Do not connect incompatible products. WATER-RESISTANCE Your phone is not water-resistant. Keep it dry. BACK-UP COPIES Remember to make back-up copies or keep a written record of all important information stored in your phone.
■ About your device The wireless device described in this guide is approved for use on the EGSM 900 and GSM 1800 and 1900 networks. Contact your service provider for more information about networks. When using the features in this device, obey all laws and respect the privacy and legitimate rights of others. Warning: To use any features in this device, other than the alarm clock, the device must be powered on. Do not switch the device on when the use of wireless devices may cause interference or danger.
services, content and application download, synchronization with a remote Internet server, and push to talk require network support for these technologies. ■ Shared memory The phone has two memories. The following features may share the first memory: contacts, text messages, multimedia messages (but no attachments), instant messaging, groups, voice tags, calendar, and to-do notes.
General information ■ Overview of functions Your phone provides many functions that are practical for daily use, such as a calendar, a clock, an alarm clock, a radio and a built-in camera. Your phone also supports the following functions: • Enhanced data rates for GSM evolution (EDGE): see “Packet data (EGPRS),” p. 80 • Extensible hypertext markup language (XHTML): see “Web,” p. 122 • E-mail application: see “E-mail application,” p. 56 • Audio messaging: see “Nokia Xpress audio messaging,” p.
■ Access codes Security code The security code (5 to 10 digits) helps to protect your phone against unauthorized use. The preset code is 12345. To change the code and set the phone to request the code, see “Security,” p. 85. PIN codes The personal identification number (PIN) code and the universal personal identification number (UPIN) code (4 to 8 digits) help to protect your SIM card against unauthorized use. See “Security,” p. 85.
the codes are not supplied with the SIM card, contact your local service provider for the codes. Barring password The barring password (4 digits) is required when using the Call barring service. See “Security,” p. 85. ■ Configuration settings service To use some of the network services, such as the mobile Internet services, MMS, or remote Internet server synchronization, your phone needs the correct configuration settings. You may be able to receive the settings directly as a configuration message.
To edit the settings, see “Configuration,” p. 84. ■ Download content and applications You may be able to download new content (for example, themes) to the phone (network service). Select the download function (for example, in the Gallery menu). To access the download function, see the respective menu descriptions. For the availability of different services, pricing, and tariffs, contact your service provider.
1. Get started ■ Install the SIM card and battery Always switch the device off and disconnect the charger before removing the battery. Keep all SIM cards out of the reach of small children. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or another vendor. This device is intended for use with a BL-5B battery.
Grasp the removal flap, and gently pull it up (3). Lift the battery from the compartment (4). Slide the cover of the SIM card holder toward the bottom end of the phone until it unlocks (5). Swing the cover of the SIM card holder open (6). Insert the SIM card into the holder. Copyright © 2005 Nokia. All rights reserved.
Ensure that the beveled corner of the SIM card is on the left, and the golden contact area is facing down (7). Close the cover of the SIM card holder (8). Slide the cover of the SIM card holder toward the top end of the phone until it locks into place (9). Position the battery with the contacts aligned to the golden contacts on the phone. Insert the battery into the battery slot, contact end first (10). Close the battery flap (11). Copyright © 2005 Nokia. All rights reserved.
Place the phone into the lower shell, sliding the shell forward until it locks into place (12). Always use original Nokia batteries. See the “Nokia battery authentication guidelines,” p. 137. ■ Charge the battery Warning: Use only batteries, chargers and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous. Check the model number of any charger before use with this device.
The charging time depends on the charger and the battery used. For example, charging a BL-5B battery with the ACP-12 charger takes approximately 1 hour and 10 minutes while the phone is in the standby mode. ■ Switch the phone on and off Warning: Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. Press and hold the power key. If the phone asks for a PIN or a UPIN code, enter the code (displayed as ****), and select OK.
■ Wrist strap Connect the elastic band to the holster (1). Connect the pins on the end of the holster to the holes in the lower end of the phone (2). Connect the pin on the other end of the holster to the hole in the top end of the phone (3). Wrap the elastic band, for example, around your wrist and connect the band to the holster (4). Connect the hook to the loop on the elastic band. The hook contains a magnifying glass and a whistle (5). Copyright © 2005 Nokia. All rights reserved.
2. Your phone ■ Keys and parts • Flashlight (1). To activate it, press and hold # in the standby mode. • Power key to turn the phone on and off (2) • Bubble level to level the phone while using the compass, and standby light (3) • Volume keys to adjust the volume of the earpiece, loudspeaker, or headset when connected to the phone (4) • Push to talk (PTT) key (5) • Left selection key, middle selection key and right selection key (6).
• Call key (8) to dial a phone number or answer a call • End key (9) to end a call or exit functions • Keys 0 – 9 to enter numbers and characters (10). Keys and # have various functions in different situations. * • Charger connector (1) • Pop-PortTM connector used, for example, with headsets and the data cable (2) • Camera lens (3) • Infrared (IR) port (4) Copyright © 2005 Nokia. All rights reserved.
■ Standby mode When the phone is ready for use, and you have not entered any characters, the phone is in the standby mode. Display • Name of the network or the operator logo (1) • Signal strength of the cellular network at your current location (2) • Battery charge level (3) • Left selection key is Go to (4) • Middle selection key is Menu (5) • Right selection key is Audio message (6) or another shortcut to a function you have selected: see “My shortcuts,” p. 78.
To view a list with available functions, select Go to > Options > Select options. To add a function to the shortcut list, select Mark. To remove a function from the list, select Unmark. To rearrange the functions on your personal shortcut list, select Go to > Options > Organise. Select the desired function and Move and the place where you want to move the function. Shortcuts in standby mode • To access the list of dialed numbers, press the call key once.
Power saving A digital clock view overwrites the display when no phone function has been used for a certain period of time. To activate the power saver, see Power saver in “Display,” p. 77. To deactivate the screen saver, press any key. Indicators You received one or several text or picture messages. See “Read and reply to a SMS message,” p. 42. You received one or more multimedia messages. See “Read and reply to a multimedia message,” p. 46. The phone registered a missed call. See “Call register,” p. 73.
A packet data connection is established. See “Packet data (EGPRS),” p. 80 and “Browse pages,” p. 123. The packet data connection is suspended (on hold), for example, if there is an incoming or outgoing call during a packet data dial-up connection. When the infrared connection is activated, this indicator is shown continuously. ■ Keypad lock (keyguard) To prevent the keys from being accidentally pressed, select Menu, and press within 3.5 seconds to lock the keypad.
3. Call functions ■ Make a call 1. Enter the phone number, including the area code. For international calls, press twice for the international prefix (the + character replaces the international access code) and then enter the country code, the area code without the leading 0, if necessary, and the phone number. * 2. To call the number, press the call key. 3. To end the call or to cancel the call attempt, press the end key.
■ Answer or reject a call To answer an incoming call, press the call key. To end the call, press the end key. To reject an incoming call, press the end key. To mute the ringing tone, select Silence. Then, either answer or reject the call. Tip: If the Divert if busy function is activated to divert the calls (for example, to your voice mailbox) rejecting an incoming call will also diverts the call. See “Call,” p. 81.
Network services options are Answer and Reject, Hold or Unhold, New call, Add to conference, End call, End all calls, and the following: Send DTMF — to send tone strings Swap — to switch between the active call and the call on hold Transfer — to connect a call on hold to an active call and disconnect yourself Conference — to make a conference call that allows up to five persons to take part in a conference call Private call —to discuss privately in a conference call Warning: Do not hold the device near your
4. Write text You can enter text (for example, when writing messages) using traditional or predictive text input. When using traditional text input, press a number key, 1 to 9, repeatedly until the desired character appears. In predictive text input you can enter a letter with a single keypress. When you are writing text, predictive text input is indicated by and traditional text input by at the top left of the display. , , or appear next to the text input indicator, indicating the character case.
■ Predictive text input Predictive text input is based on a built-in dictionary to which you can also add new words. 1. Start writing a word using the 2 to 9 keys. Press each key only once for a single letter. The word changes after each keypress. 2. When you have finished writing the word and it is correct, to confirm it, press 0 to add a space, or press any of the scroll keys. Press a scroll key to move the cursor. If the word is not correct, press repeatedly, or select Options > Matches.
■ Traditional text input Press a number key, 1 to 9, repeatedly until the desired character appears. Not all characters available under a number key are printed on the key. The characters available depend on the writing language. See “Settings,” p. 36. If the next letter you want is located on the same key as the present one, wait until the cursor appears, or press any of the scroll keys and enter the letter. The most common punctuation marks and special characters are available under the 1 key.
5. Navigate the menus The phone offers you an extensive range of functions, which are grouped into menus. 1. To access the menu, select Menu. To change the menu view, select Options > Main menu view > List or Grid. 2. Scroll through the menu and select a submenu (for example, Settings). 3. If the menu contains submenus, select the one that you want (for example, Call settings). 4. If the selected menu contains further submenus, select the one that you want (for example, Anykey answer). 5.
6. Messages The message services can only be used if they are supported by your network or service provider. Note: When sending messages, your phone may display the words Message sent. This is an indication that the message has been sent by your device to the message centre number programmed into your device. This is not an indication that the message has been received at the intended destination. For more details about messaging services, check with your service provider.
Your device supports the sending of text messages beyond the character limit for a single message. Longer messages will be sent as a series of two or more messages. Your service provider may charge accordingly. Characters that use accents or other marks, and characters from some language options like Chinese, take up more space limiting the number of characters that can be sent in a single message.
Read and reply to a SMS message is shown when you have received a message or an e-mail using SMS. The blinking indicates that the message memory is full. Before you can receive new messages, delete some of your old messages from the Inbox folder. 1. To view a new message, select Show. To view it later, select Exit. To read the message later, select Menu > Messages > Inbox. If more than one message has been received, select the message that you want to read. indicates an unread message. 2.
Templates Your phone has text templates and picture templates text, picture, or SMS e-mail messages. that you can use in To access the template list, select Menu > Messages > Saved items > Text messages > Templates. ■ Multimedia messages (MMS) A multimedia message can contain text, sound, a picture, a calendar note, a business card, or a video clip. If the message is too large, the phone may not be able to receive it.
Write and send a multimedia message To set the settings for multimedia messaging, see “Multimedia,” p. 60. To check availability and to subscribe to the multimedia messaging service, contact your service provider. 1. Select Menu > Messages > Create message > Multimedia msg.. 2. Enter a message. See “Write text,” p. 36.
options the following options may be available: Insert contact, Insert number, Message details, and Edit subject. 3. To send the message, select Send > Recently used, To phone number, To e-mail address, or To many. 4. Select the contact from the list, or enter the recipient’s phone number or email address, or search for it in Contacts. Select OK. The message is moved to the Outbox folder for sending.
Read and reply to a multimedia message The default setting of the multimedia message service is generally on. Important: Exercise caution when opening messages. Multimedia message objects may contain malicious software or otherwise be harmful to your device or PC. When your phone receives a multimedia message, the animated is displayed. When the message has been received, and the text Multimedia message received are shown. 1. To read the message, select Show. To view it later, select Exit.
■ Memory full When you have received a new text message and the message memory is full, blinks and Text msgs. memory full. Delete msgs. is shown. Select No, and delete some messages from a folder. To discard the waiting message, select Exit > Yes. When you have a new multimedia message waiting and the memory for the messages is full, blinks and Multimedia memory full. View waiting msg. is shown. To view the waiting message, select Show.
Receive a flash message A received flash message is not automatically saved. To read the message, select Read. To extract phone numbers, e-mail addresses, and Web site addresses from the current message, select Options > Use detail. To save the message, select Save and the folder in which you want to save the message. ■ Nokia Xpress audio messaging With this functionality, use the multimedia message service to create and send a voice message in a convenient way.
Receive an audio message When your phone is receiving an audio message, the text 1 audio message received is shown. Select Play to open the message, or select Show > Play, if there are more than one message received. Select Options to see the options available. To listen to the message later, select Exit. To save the message, select Options > Save and the folder in which you want to save the message. ■ Folders The phone saves received text and multimedia messages in the Inbox folder.
To delete or rename a folder, scroll to the desired folder, and select Options > Delete folder or Rename folder. ■ Instant messages (IM) Instant messaging (network service) is a way to send short, simple text messages to online users. Before you can use instant messaging, you must subscribe to the service. To check availability and costs, and to subscribe to the service, contact your network operator or service provider, from whom you also receive a unique ID, password, and settings.
Login — to connect to the instant messaging service Saved convers. — to view, erase or rename the instant messaging conversations that you have saved during the instant messaging session Connect. settings — to edit the settings needed for messaging and presence connection Connect to the instant messaging service To connect to the instant messaging service, enter the Instant messages menu, activate an instant messaging service, and select Login.
The icons and texts on the display may vary, depending on the instant messaging service. • IM contacts to view the contacts that you have added. Scroll to the contact with whom you would like to chat and select Chat or Open if a new contact is shown in the list. To add contacts see “Contacts for instant messaging,” p. 54. indicates the online and the offline contacts in the phone contacts memory. indicates a blocked contact. indicates a contact that has been sent a new message.
Accept or reject an invitation In the standby mode, when you are connected to the instant messaging service and you receive a new invitation, New invitation received is displayed. To read it, select Read. If more than one invitation is received, scroll to the invitation you want, and select Open. To join a private group conversation, select Accept, and enter a screen name; to reject or delete the invitation, select Options > Reject or Delete.
Edit your availability status 1. Open the Instant messages menu, and connect to the instant messaging service. 2. To view and edit your own availability information or screen name, select My settings. 3. To allow all other instant messaging users to see you when you are online, select Availability > Available for all. To allow only the contacts on your instant messaging contact list to see you when you are online, select Availability > Avail. for contacts.
Block and unblock messages To block messages, connect to the instant messaging service and select Conversations > IM contacts, or join or start a conversation. Scroll to the contact from whom you want to block incoming messages, and select Options > Block contact > OK. To unblock the messages, connect to the instant messages service and select Blocked list. Scroll to the contact from whom you want to unblock messages, and select Unblock.
Create a private group Connect to the instant messaging service, and select Groups > Create group. Enter the name for the group and the screen name that you want to use. Mark the private group members in the contacts list, and write an invitation. ■ E-mail application The e-mail application allows you to access your compatible e-mail account from your phone when you are not in the office or at home. This e-mail application is different from the SMS and MMS e-mail function.
Write and send an e-mail 1. Select Menu > Messages > E-mail > Create e-mail. 2. Enter the recipient’s e-mail address, a subject and the e-mail message. To attach a file to the e-mail, select Options > Attach and the file in Gallery. 3. Select Send > Send now. Download e-mail 1. To access the e-mail application, select Menu > Messages > E-mail. 2. To download e-mail messages that have been sent to your e-mail account, select Retrieve.
Read and reply to e-mail Select Menu > Messages > E-mail > Inbox. While reading the message, select Options to view the available options. To reply to an e-mail, select Reply > Original text or Empty screen. To reply to many, select Options > Reply to all. Confirm or edit the e-mail address and subject; then write your reply. To send the message, select Send > Send now. Inbox and other folders Your phone saves e-mail that you have downloaded from your e-mail account in the Inbox folder.
■ Voice messages The voice mailbox is a network service and you may need to subscribe to it. For details, contact your service provider. To call your voice mailbox, select Menu > Messages > Voice messages > Listen to voice messages. To enter, search for, or edit your voice mailbox number, select Voice mailbox number. If supported by the network, indicates that there are new voice messages. Select Listen to call your voice mailbox number. ■ Info messages Select Menu > Messages > Info messages.
folder contains unread messages, the phone asks whether you want to delete them also. Select Yes again. ■ Message settings Text and SMS e-mail The message settings affect the sending, receiving, and viewing of messages. Select Menu > Messages > Message settings > Text messages, and from the following options: Sending profile — If more than one message profile set is supported by your SIM card, select the set you want to change.
Save sent messages > Yes — to set the phone to save sent multimedia messages in the Sent items folder Delivery reports — to ask the network to send delivery reports about your messages (network service) Scale image down — to define the image size when you insert an image to a multimedia message Default slide timing — to define the default time between slides in multimedia messages Allow multimedia reception > Yes or No — to receive or to block the multimedia message.
E-mail The settings affect the sending, receiving, and viewing of e-mail. You may receive the configuration settings for the e-mail application as a configuration message. See “Configuration settings service,” p. 19. You can also enter the settings manually. See “Configuration,” p. 84. To activate the settings for the e-mail application, select Menu > Messages > Message settings > E-mail messages and from the following options: Configuration — Select the set that you would like to activate.
Other settings To select other settings for messages, select Menu > Messages > Message settings > Other settings. To change the font size for reading and writing messages, select Font size. To set the phone to replace character-based smileys with graphical ones, select Graphical smileys > Yes. ■ Message counter Select Menu > Messages > Message counter for approximate information on your recent communications. Copyright © 2005 Nokia. All rights reserved.
7. Contacts You can save names and phone numbers (Contacts) in the phone memory and in the SIM-card memory. The phone memory can save contacts with numbers and text items. You can also save an image for a certain number of names. Names and numbers saved in the SIM-card memory are indicated by . ■ Search for a contact Select Menu > Contacts > Names > Options > Search. Scroll through the list of contacts or enter the first letter of the name for which you are searching.
When you select a name (for example, to make a call), the default number is used unless you select another number. 1. Make sure that the memory in use is either Phone or Phone and SIM. 2. Scroll to the name to which you want to add a new number or text item, and select Details > Options > Add detail. 3. To add a number, select Number and one of the number types. To add another detail select a text type or an image from Gallery.
■ Edit contact details 1. Search for the contact you want to edit, select Contact details, and scroll to the desired name, number, text item, or image. 2. To edit a name, number, or text item, or to change an image, select Options > Edit name, Edit number, Edit detail, or Change image. You cannot edit an ID when it is on the IM contacts or Subscribed names list.
To send a business card, search for the contact whose information you want to send, and select Contact details > Options > Send bus. card > Via multimedia, Via text message, or Via infrared. When you have received a business card, select Show > Save to save the business card in the phone memory. To discard the business card, select Exit > Yes. ■ My presence With the presence service (network service), you can share your presence status with other users with compatible devices and access to the service.
Connect to 'My presence' service or Disconnect from service — to connect to or disconnect from the service. View my presence — to view the status in Private pres. and Public presence. Edit my presence — to change your presence status. Select My availability, My presence message, My presence logo, or Show to. My viewers > Current viewers, Private list, or Blocked list Settings > Show current presence in idle, Synchronise with profiles, Connection type, or Connect.
3. Select a contact from the list and, if the contact has an user ID saved, the contact is added to the subscribed names list. View the subscribed names To view presence information, see “Search for a contact,” p. 64. 1. Select Menu > Contacts > Subscribed names. The status information of the first contact on the subscribed names list is displayed.
■ Settings Select Menu > Contacts > Settings and from the following options: Memory in use — to select SIM card or phone memory for your contacts Contacts view — to select how the names and numbers in contacts are displayed Memory status — to view the free and used memory capacity ■ Groups Select Menu > Contacts > Groups to arrange the names and phone numbers saved in the memory into caller groups with different ringing tones and group images.
Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialling in all circumstances. Add and manage voice tags Save or copy the contacts to the phone memory for which you want to add a voice tag. You can also add voice tags to the names in the SIM card, but if you replace your SIM card with a new one, you must first delete the old voice tags before you can add new ones. 1. Search for the contact to which you want to add a voice tag.
2. Say the voice tag clearly. The phone plays the recognized voice tag, and dials the phone number of the voice tag after 1.5 seconds. If you are using a compatible headset with the headset key, press and hold the headset key to start the voice dialing. ■ Speed dials To assign a number to a speed-dialing key, select Menu > Contacts > Speed dials, and scroll to the speed-dialing number that you want. Select Assign, or if a number has already been assigned to the key, select Options > Change.
8. Call register The phone registers the phone numbers of identified, missed, received, and dialed calls; the message recipients; and the approximate length of your calls. The phone registers if it is switched on and within the network’s service area, and the network supports these functions.
■ Positioning The network may send you a location request. You can ensure that the network delivers location information from your phone only if you approve it (network service). Contact your network operator or service provider to subscribe and to agree upon the delivery of location information. To accept or reject the location request, select Accept or Reject.
9. Settings ■ Profiles Your phone has various setting groups, called profiles, for which you can customize the phone tones for different events and environments. Select Menu > Settings > Profiles. Scroll to a profile, and select it. To activate the selected profile, select Activate. To set the profile to be active until a certain time up to 24 hours, select Timed and set the time the profile setting shall end.
Theme downloads — to open a list of links to download more themes. See “Downloads,” p. 127. ■ Tones You can change the settings of the selected active profile. Select Menu > Settings > Tones. Select and change Incoming call alert, Ringing tone, Ringing volume, Vibrating alert, Push to talk settings, Message alert tone, Instant message alert tone, Keypad tones, Warning tones and Alert for. You can find the same settings in the Profiles menu. See “Profiles,” p. 75.
■ Display Select Menu > Settings > Display and from the following options: Wallpaper — to add the background image to the display in standby mode. To select, activate, or deactivate the wallpaper, select Select wallpaper > On or Off. Select Select slide set and a folder in the Gallery to use the images in the folder as a slide set. To download more images for wallpaper, select Graphic downloads. Screen saver > On — to activate the screen saver.
■ Time and date Select Menu > Settings > Time and date and from the following options: Clock — to set the phone to show the clock in the standby mode, adjust the clock, and select the time zone and the time format Date — to set the phone to show the date in the standby mode, set the date, and select the date format and date separator Auto-update of date & time (network service) — to set the phone to automatically update the time and date according to the current time zone ■ My shortcuts With personal short
tags,” p. 71. To activate a voice command, see “Make a call with a voice tag,” p. 71. ■ Connectivity You can connect your phone to compatible devices using an infrared connection. You can also define the settings for packet data dial-up connections. Infrared You can set up the phone to send and receive data through its infrared (IR) port. To use an IR connection, the device with which you want to establish a connection must be IrDA compliant.
IR connection indicator When is shown continuously, the IR connection is activated, and your phone is ready to send or receive data through its IR port. When blinks, your phone is trying to connect to the other device, or a connection has been lost. Packet data (EGPRS) Enhanced general packet radio service (EGPRS), packet data, is a network service which allows mobile phones to send and receive data over an Internet protocol (IP)-based network.
Modem settings You can connect the phone using an IR or a data cable (CA-42) connection to a compatible PC, and use the phone as a modem to enable packet data connectivity from the PC. To define the settings for connections from the PC, select Menu > Settings > Connectivity > Packet data > Packet data settings > Active access point, activate the access point you want to use, and select Edit active access point. Select Alias for access point, and enter a nick name for the currently selected access point.
Automatic redial > On — to set your phone to make a maximum of 10 attempts to connect the call after an unsuccessful call attempt Speed dialling > On — to activate speed dialling. To set up speed dialling, see “Speed dials,” p. 72. To dial, press and hold the corresponding number key. Call waiting > Activate — to set the network to notify you of an incoming call while you have a call in progress (network service). See “Call waiting,” p. 34.
When the keyguard is on, calls still may be possible to the official emergency number programmed into your device. Cell info display > On — to receive information from the network operator depending on the network cell used (network service). Welcome note — to enter a welcome note to be shown briefly when the phone is switched on Operator selection > Automatic — to set the phone automatically to select one of the cellular networks available in your area.
Automatic answer — to set the phone to answer an incoming call automatically after 5 seconds. If Incoming call alert is set to Beep once or Off, automatic answer is off. Lights — to set the lights permanently On. Select Automatic to set the lights on for 15 seconds after a key press Text phone > Use text phone > Yes — to use the text phone settings instead of headset or loopset settings ■ Configuration You can configure your phone with settings that are required for certain services to function correctly.
Activate default in all applications — to activate the default configuration settings for supported applications Preferred access point — to view the saved access points. Scroll to an access point, and select Options > Details to view the name of the service provider, data bearer, and packet data access point or GSM dial-up number.
Fixed dialling — to restrict your outgoing calls to selected phone numbers if this function is supported by your SIM card Closed user group (network service) — to specify a group of people whom you can call and who can call you Security level > Phone — the phone asks for the security code whenever a new SIM card is inserted into the phone. Select Memory and the phone asks for the security code when SIM card memory is selected and you want to change the memory in use.
10. Operator menu This menu lets you access a portal to services provided by your network operator. The name and the icon depend on the operator. For more information, contact your network operator. If this menu is not shown the following menu numbers change accordingly. The operator can update this menu with a service message. For more information. See to “Service inbox,” p. 127. Copyright © 2005 Nokia. All rights reserved.
11. Gallery In this menu you can manage graphics, images, recordings, video clips, themes, tones and received files. These files are arranged in folders. Your phone supports an activation key system to protect acquired content. Always check the delivery terms of any content and activation key before acquiring them, as they may be subject to a fee. Copyright protections may prevent some images, ringing tones, and other content from being copied, modified, transferred, or forwarded.
Zoom — to increase the size of the image Mute audio (Unmute audio) — to mute (unmute) the sound file Set contrast — to adjust the contrast level of the image Activate content — to update the activation key of the selected file. The option is only shown if the activation key updating is supported by the file. Activation key list — to view the list of all available activation keys. You can delete the activation keys (for example, delete the expired ones). Copyright © 2005 Nokia. All rights reserved.
12. Media Copyright protections may prevent some images, ringing tones, and other content from being copied, modified, transferred or forwarded. ■ Camera You can take photos or record video clips with the built-in camera. The camera produces pictures in JPEG format and video clips in 3GP format. When taking and using images or video clips, obey all laws and respect local customs as well as the privacy and legitimate rights of others.
■ Radio The FM radio depends on an antenna other than the wireless devices antenna. A compatible headset or enhancement needs to be attached to the device for the FM radio to function properly. Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. Select Menu > Media > Radio.
Select Options and from the following options: Switch off — to turn off the radio Save channel — to save a new channel, and enter the channels name Channels — to select the list of saved channels. To delete or rename a channel, scroll to the desired channel, and select Options > Delete channel or Rename. Mono output or Stereo output — to listen to the radio in monophonic sound or in stereo Loudspeaker or Headset — to listen to the radio using the loudspeaker or headset.
■ Recorder You can record pieces of speech, sound, or an active call for 3 minutes. The recorder cannot be used when a data call or packet data connection is active. Record sound 1. Select Menu > Media > Recorder. To use the graphical keys, , the desired key, and select it. , or , on the display, scroll left or right to 2. To start the recording, select . To start the recording during a call, select Options > Record.
■ Sound meter The sound meter enables you to measure the approximate noise level of the environment. It provides general measurements for personal use that may vary from scientific measurements. You cannot measure the noise level during a call or while a headset is connected to the phone. To start sound monitoring, select Menu > Media > Sound meter. The sound meter bar graphically shows the noise level, and the peak level is indicated.
13. Push to talk Push to talk (PTT) over cellular is a two-way radio service available over a GSM/GPRS cellular network (network service). PTT provides direct voice communication. To connect to, press the PTT key. You can use PTT to have a conversation with one person or with a group of people having compatible devices. When your call is connected, the person or group you are calling does not have to answer the phone.
■ Push to talk menu Select Menu > Push to talk. • To connect to or disconnect from the PTT service, select Switch PTT on or Switch PTT off. • To view received callback requests, select Callback inbox. • To view the list of PTT groups, select Group list. • To view the list of contacts to which you have added the PTT address received from the service provider, select Contacts list. • To add a new PTT group to the phone, select Add group. • To set the PTT settings for use, select PTT settings.
■ Make and receive a PTT call Set the phone to use the loudspeaker or earpiece for PTT communication. Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. When connected to the PTT service, you can make or receive dial out calls, group calls or one-to-one calls. One-to-one calls are calls you make to only one person. Make a dial out PTT call For a dial-out PTT call you can select multiple PTT contacts from the contact list.
hold the PTT key to talk to the joined contacts. Release the PTT key to hear the response. Press the end-key to terminate the dial-out call. Make a group call To make a call to the default group, press the PTT key. A tone sounds, indicating that the access is granted, and the phone displays your nickname and group name. To make a call to a non-default group, select Group list in the PTT menu, scroll to the desired group, and press the PTT key.
Receive a PTT call A short tone notifies you of an incoming group and one-to-one call. When receiving a group call, the group name and the nickname of the caller are displayed. When receiving a one-to-one call from a person whose information you have saved in Contacts, the saved name is displayed if identified; otherwise, only the nickname of the caller is displayed. You can either accept or reject an incoming one-to-one call if you have set the phone to first notify you of the one-to-one calls.
Send a callback request You can send a callback request in the following ways: • To send a callback request from the contacts list in the Push to talk menu, select Contacts list. Scroll to a contact, and select Options > Send callback. • To send a callback request from Contacts, search for the desired contact, select Options > Contact details, scroll to the PTT address, and select Options > Send callback.
Save the callback request sender 1. To open the Callback inbox, select View. The list of nicknames of the persons who have sent you callback requests is shown. 2. To view the sender's PTT address, select Options > View PTT address. To save a new contact or to add the PTT address to a contact, select Options > Save as or Add to contact.
■ Create and set up groups When you call a group, all members joined to the group hear the call simultaneously. Each member in the group is identified by a nickname, which is shown as a caller identification. Group members can choose a nickname for themselves in each group. Groups are registered with a URL address. One user registers the group URL in the network by joining the group session the first time.
who creates the private group can invite more members to the group. Enter the name for the group. Select Default, Listened, or Inactive. The phone indicates that the group is saved and its status. Default and Listened are active groups. When you press the PTT key to make a group call, the default group is called if you have not scrolled to any other group or contact. To send an invitation to the group, select Yes when the phone requests it. You can send the invitation using a text message or IR.
■ PTT settings There are two kinds of PTT settings: settings for connecting to the service and settings for use. You may receive the settings for connecting to the service from your network operator or service provider. See “Configuration settings service,” p. 19. You can enter the settings manually. See “Configuration,” p. 84. To select the settings for connecting to the service, select Menu > Push to talk > Config. settings.
14. Sports ■ Compass The phone has a digital compass that shows direction both graphically and in digits. The compass should always be properly calibrated. Electromagnetic fields, large metal objects, and other external circumstances may reduce the accuracy of the compass. Never rely solely on the phone compass. Proper calibration of the compass requires that you calibrate the compass against magnetic north and set the declination value according to your location.
While using the compass, hold the phone horizontally by using the bubble level in the top left corner of the phone. The compass deactivates and goes into the standby mode after a certain time to save power; select Continue to activate the compass again. To prevent the compass from going into the standby mode, press a number key every few minutes. You can use the flashlight when the compass is active. Calibrate the compass 1. Select Menu > Sports > Compass. 2.
Set and reset the direction 1. Select Menu > Sports > Compass. 2. To set the compass direction, follow the commands on the display. To reset the direction of the intended destination, select Reset > Yes. Point the phone in the direction of the intended destination and select Set direc.. The arrow points in the direction you have set, and the numeric value is shown at the top right of the display. When the arrow points up on the display, the phone is pointed in the correct direction.
Lap timing — to take lap times. To set the stopwatch timing in the background, press the end key. Continue — to view the timing that you have set in the background Show last — to view the most recently measured time if the stopwatch is not reset View times or Delete times — to view or delete saved times ■ Countdown timer Select Menu > Sports > Countdown timer. Enter the alarm time in hours, minutes and seconds, and select OK. If you wish, write your own note that is displayed when the time expires.
■ Thermometer The thermometer measures temperature in Celsius and Fahrenheit. You can set the phone to display the temperature in the standby mode. The thermometer is useful to plan and monitor your outdoor activities, but is not intended for professional use. The thermometer provides general measurements for personal use that may vary from scientific measurements. Select Menu > Sports >Thermometer. To show (or hide) the temperature value in the standby mode, select Show thermom. (or Hide thermometer).
15. Organiser ■ Alarm clock You can set the phone alarm to sound at a desired time. Select Menu > Organiser > Alarm clock. To set the alarm, select Alarm time, and enter the alarm time. To change the alarm time when the alarm time is set, select On. To set the phone to alert you on selected days of the week, select Repeat alarm. To select the alarm tone or set a radio channel as the alarm tone, select Alarm tone. If you select the radio as an alarm tone, connect the headset to the phone.
activate the device for calls. Select No to switch off the device or Yes to make and receive calls. Do not select Yes when wireless phone use may cause interference or danger. ■ Calendar Select Menu >Organiser > Calendar. The current day is indicated by a frame. If there are any notes set for the day, the day is in bold type. To view the day notes, select View. To view a week, select Options > Week view.
Note alarm The phone beeps and displays the note. With a call note on the display, to call the displayed number, press the call key. To stop the alarm and to view the note, select View. To stop the alarm for approximately 10 minutes, select Snooze. To stop the alarm without viewing the note, select Exit. ■ To-do list To save notes for tasks that you must do, select Menu > Organiser > To-do list. To create a note if no note is added, select Add note; otherwise, select Options > Add note.
■ Notes To use this application for writing and sending notes, select Menu > Organiser > Notes. To create a note if no note is added, select Add note; otherwise, select Options > Make a note. Write a note, and select Save. Other options for notes include deleting, and editing a note. While editing a note, you can also exit the text editor without saving the changes. You can send the note to compatible devices using a text message, a multimedia message, or IR.
OK. The exchange rate remains in the memory until you replace it with another one. To perform the currency conversion, enter the amount to be converted, and select Options > In domestic or In foreign. Note: When you change base currency, you must enter the new rates because all previously set exchange rates are set to zero. ■ Synchronization Synchronization allows you to save your calendar and Contacts data on a remote Internet server (network service) or on a compatible PC.
To start the synchronization from your phone, do the following: 1. Select the configuration settings you need for the synchronization. See “Synchronization settings,” p. 115. 2. Select Menu > Organiser > Sync > Server sync > Data to be synchronised. Mark the data to be synchronized. 3. Select Menu > Organiser > Sync > Server sync > Synchronise. The marked data of the active set is synchronized after confirmation.
The user name and password must be the same in the phone and in the PC. Synchronize from a compatible PC To synchronize Contacts, Calendar, and Notes from a compatible PC, use an IR, or data cable connection. You also need Nokia PC Suite software of your phone installed on the PC. Start the synchronization from the PC using Nokia PC Suite. Copyright © 2005 Nokia. All rights reserved.
16. Applications ■ Games Your phone software includes some games. Launch a game Select Menu > Applications > Games. Scroll to the desired game, and select Open. For options related to a game, see “Other application options,” p. 120. Game downloads Select Menu > Applications > Options > Downloads > Game downloads. The list of available bookmarks is shown. Select More bookmarks to access the list of bookmarks in the Web menu. See “Bookmarks,” p. 126.
■ Collection Your phone software includes some Java applications specially designed for this Nokia phone. Launch an application Select Menu > Applications > Collection. Scroll to an application, and select Open. Fitness coach Fitness coach is an interactive, personal trainer to help you improve your fitness level, strength, and endurance. Programs are created based on your personal data, whether for training indoors or outdoors. Before beginning a regular exercise program consult your physician or doctor.
The first time you use Fitness coach, enter your personal details, including your sex, birthday, measurement unit, height, weight, endurance level and strength level. Additional data includes your maximum heart rate and resting heart rate. Select a program with Planner to guide you through planning and setting goals for your fitness program. Or, you can select Quick start to immediately begin a program based on your personal profile.
Other application options Delete — to delete the application or application set from the phone Move — to move an application to a different folder Details — to view additional information about the application Update version — to check if a new version of the application is available for download from Web (network service) App. access — to restrict the application from accessing the network. Different categories are shown.
Activation key list — to view the list of all available activation keys. You can delete expired activation keys. Download an application Your phone supports J2METM Java applications. Make sure that the application is compatible with your phone before downloading it. Important: Only install and use applications and other software from sources that offer adequate security and protection against harmful software. You can download new Java applications in different ways.
17. Web You can access various mobile Internet services with your phone browser. Important: Use only services that you trust and that offer adequate security and protection against harmful software. Check the availability of these services, pricing, tariffs, and instructions with your service provider. With the phone browser, you can view the services that use wireless markup language (WML) or extensible hypertext markup language (XHTML) on their pages – appearance may vary due to screen size.
1. To select the settings for connecting to the service, select Menu > Web > Settings > Configuration settings. 2. Select Configuration – only the configurations that support a browsing service are shown. Select a service provider, Default, or Personal config. for browsing: see “Set up browsing,” p. 122. Select Account and a browsing service account contained in the active configuration settings. Select Display terminal window > Yes to perform manual user-authentication for Intranet connections.
a packet-data connection, is shown on the top right of the display to indicate that the packet-data connection is suspended (on hold). After a call, the phone tries to reconnect the packet-data connection. Browse with phone keys Scroll in any direction to browse through the page. To select a highlighted item, press the call key, or select Select. To enter letters and numbers, press keys 0 to 9. To enter special characters, press . * Options while browsing Nokia.
■ Appearance settings While browsing, select Options > Other options > Appear. settings; or in standby mode, select Menu > Web > Settings > Appearance settings and from the following options: Text wrapping > On — to set the text to continue on the next line on the display. If you select Off, the text is abbreviated. Font size > Extra small, Small, or Medium — to set the font size Show images > No — to hide pictures on the page. This can speed up the browsing of pages that contain a lot of pictures.
■ Cookies A cookie is data that a site saves in the cache memory of your phone. Cookies are saved until you clear the cache memory: see “Cache memory,” p. 129. While browsing, select Options > Other options > Security > Cookie settings or, in standby mode, select Menu > Web > Settings > Security settings > Cookies. To allow or prevent the phone from receiving cookies, select Allow or Reject. ■ Scripts over secure connections You can select whether to allow the running of scripts from a secure page.
3. Select Options to view, edit, delete or send a bookmark; create a new bookmark; or save the bookmark to a folder. Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precautions for security or content as you would with any Internet site. Receive a bookmark When you have received a bookmark that is sent as a bookmark, 1 bookmark received is displayed.
To access the Service inbox in standby mode when you have received a service message, select Show. If you select Exit, the message is moved to the Service inbox. To access the Service inbox later, select Menu > Web > Service inbox. To access the Service inbox while browsing, select Options > Other options > Service inbox. Scroll to the message you want, and select Retrieve to activate the browser and download the marked content.
■ Cache memory A cache is a memory location that is used to store data temporarily. If you have tried to access or have accessed confidential information requiring passwords, empty the cache after each use. The information or services you have accessed is stored in the cache. To empty the cache while browsing, select Options > Other options > Clear the cache; from standby mode, select Menu > Web > Clear the cache.
Module PIN request — to set the phone to ask for the module PIN when using services provided by the security module. Enter the code and select On. To disable the module PIN request, select Off. Change module PIN — to change the module PIN, if allowed by the security module. Enter the current module PIN code, then enter the new code twice. Change signing PIN — to change the signing PIN code for the digital signature. Select the signing PIN you want to change.
provider. Authority certificates and user certificates may also be saved in the security module by the service provider. To view the list of the authority or user certificates downloaded to your phone, select Menu > Web > Settings > Security settings > Authority certificates or User certificates. The security indicator is displayed during a connection, if the data transmission between the phone and the content server is encrypted.
The text may not fit within a single screen. Therefore, make sure you scroll through and read all of the text before signing. Select the user certificate you want to use. Enter the signing PIN (see “Access codes,” p. 18), and select OK. The digital signature icon disappears, and the service may display a confirmation of your purchase. Copyright © 2005 Nokia. All rights reserved.
18. SIM services Your SIM card may provide additional services that you can access. This menu is shown only if it is supported by your SIM card. The name and contents of the menu depend on the SIM card. For availability, rates and information on using SIM services, contact your SIM-card vendor, for example, network operator, service provider or other vendor.
19. PC connectivity You can send and receive email and access the Internet when your phone is connected to a compatible PC through an infrared or a data cable (CA-42) connection. You can use your phone with a variety of PC connectivity and datacommunications applications. ■ PC Suite With PC Suite, you can synchronize contacts, calendar and to-do notes, and notes between your phone and the compatible PC, or a remote Internet server (network service).
■ Data-communication applications For information on using a data-communication application, refer to the documentation provided with it. Making or answering phone calls during a computer connection is not recommended as it might disrupt operations. For better performance during data calls, place the phone on a stationary surface with the keypad facing down. Do not move the phone by holding it in your hand during a data call. Copyright © 2005 Nokia. All rights reserved.
20. Battery information ■ Charging and discharging Your device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery.
battery between 15°C and 25°C (59°F and 77°F). A device with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing. Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste.
2. When you angle the hologram left, right, down, and up, you should see 1, 2, 3, and 4 dots on each side respectively. 3. Scratch the side of the label to reveal a 20-digit code, for example, 12345678919876543210. Turn the battery so that the numbers are facing upwards. The 20-digit code reads starting from the number at the top row followed by the bottom row. 4. Confirm that the 20-digit code is valid by following the instructions at www.nokia.com/batterycheck.
may be dangerous and can result in poor performance and damage to your device and its enhancements. It may also invalidate any approval or warranty applying to the device. To find out more about original Nokia batteries, visit www.nokia.com/battery. Copyright © 2005 Nokia. All rights reserved.
CARE AND MAINTENANCE Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery and allow the device to dry completely before replacing it. • Do not use or store the device in dusty, dirty areas.
• Always create a backup of data you want to keep (such as contacts and calendar notes) before sending your device to a service facility. All of the above suggestions apply equally to your device, battery, charger or any enhancement. If any device is not working properly, take it to the nearest, authorized service facility for service. Copyright © 2005 Nokia. All rights reserved.
Additional safety information Your device and its enhancements may contain small parts. Keep them out of the reach of small children. ■ Operating environment Remember to follow any special regulations in force in any area and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions.
facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. Pacemakers Pacemaker manufacturers recommend that a minimum separation of 15.3 cm (6 inches) be maintained between a wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research.
and operating properly. Do not store or carry flammable liquids, gases or explosive materials in the same compartment as the device, its parts or enhancements. For vehicles equipped with an air bag, remember that air bags inflate with great force. Do not place objects, including installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.
■ Emergency calls Important: Wireless phones, including this device, operate using radio signals, wireless networks, landline networks, and user-programmed functions. Because of this, connections in all conditions cannot be guaranteed. You should never rely solely on any wireless device for essential communications like medical emergencies. To make an emergency call: 1. If the device is not on, switch it on. Check for adequate signal strength.
permitted levels of RF energy for the general population. The guidelines were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The guidelines include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for mobile devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit stated in the international guidelines is 2.
