Cell Phone User Guide

Table Of Contents

Measuring lap times

1. To measure lap times, press Menu, and select Applications → Extras → Stopwatch → Lap timing.

2. To start measuring time, press Start. To take lap time, press Lap.

To stop the lap timing, press Stop. To save the lap time, press Save.

3. Press Options. To start measuring time again, select Start. To reset the lap time without saving it, select Reset.

Viewing and deleting times

1. To view and delete measured times, press Menu, and select Applications → Extras → Stopwatch.

2. To show the most recently measured time when the stopwatch is not reset, select Show last. SelectView times to display a

list of names or final times of the time sets. Select the time set that you want to view.

To delete the time, press Delete.

3. To delete the saved times, select Delete times. Select Delete all, and press Yes; or select One by one, scroll to the times that

you want to delete, press Delete and Yes.

Sound meter

You can measure the approximate noise level of the environment.

The sound meter provides general measurements for personal use that may vary from scientific measurements.

Note that you cannot measure the noise level during a call or while a headset is connected to the phone.

To start sound monitoring, press Menu, and select Applications → Extras → Sound meter.

The sound meter bar graphically shows the noise level, and the peak level is indicated. The upper number indicates the peak

level and the lower framed number the current level of the sound.

To open the list of options, press Options.

• Reset peak —resets the peak value.

• Hold peak—displays the peak value that is measured until you exit the sound meter function.

• Dynamic peak —displays the peak value for 5 seconds, then resets.

• Noise tuning —to select whether to set the noise tuning off (Off), or activate the high pitch (Loud noise) or low pitch (Low

noise) noise tuning.

Thermometer

The thermometer measures temperature in Celsius and Fahrenheit. You can set the phone to display the temperature on the

display in the standby mode. The thermometer is useful in planning and monitoring your outdoor activities, but it is not

intended for professional use.

The thermometer provides general measurements for personal use that may vary from scientific measurements.

Press Menu, and select Applications → Extras → Thermometer.

• To show (or hide) the temperature value in standby mode, select Show thermom. (or Hide thermometer).

• To set the phone to show the temperature in Celsius or Fahrenheit, select Temp. format .

Applications