User Guide

NPL-4/5
System Module and User Interface Nokia Customer Care
Page 28 Copyright © 2004 Nokia Corporation. All rights reserved. Issue 1 05/04
FCI interface signals
Table 13: FCI Interface
Camera interface signals
Table 14: Camera Interface
BB Signal FCI Signal Min Nom Max Condition Note
2.80V 5.5V V
0 110 mA
0.5
Ω
impedance
1uF
GND GND 0.5
Ω
impedance
.
GenIO(22) 1.19V 1.9V High
In/Out 0 0.51V Low
1.4 2 2.6
kΩ
Pull-up in
terminal
120 pF Capacitance
GenIO(2) 1.19V 1.9V High
Out 0 0.51V Low
1.4 2 2.6
kΩ
Pull-up in
terminal
120 pF Capacitance
GenIO(25) 1.19V 1.9V High
In 0 0.51V Low
70 100 130
kΩ
Pull-up in
terminal
120 pF Capacitance
GenIO(18) 1.19V 1.9V High
In 0 0.51V Low
VIO VCC 1.72V 1.80V 1.88V V Power supply for
pull up resistors
CTRL FCI ASIP power
control
FCI SCL
FCI INT
VBATT VOUT
FCI SDA
BB Signal Camera
Si
g
nal
Min Nom Max Condition Note
VCAMDIG DVDD 1.72V 1.80V 1.88V V I
max
= 100mA,
Common for
camera and HWA
GenIO(3) 1.4V 1.88V High
Out 0 0.4V Low
13 MHz
GenIO(27) 1.4V 1.88V High
Out 0V 0.4V Low
GenIO(28) 1.4V 1.88V High
Out 0 0.6V Low
GenIO(26) 1.4V 1.88V High
Out 0 0.4V Low
GenIO(1) 1.4V 1.88V High
Out 0 0.4V Low
Reg_en 1.8V 1.8V and 2.8V
regulators
enable/disable
CSX 1.8V CSX signal for
HWA
CE 1.8V CE signal for HWA
and camera
CLK 1.8V Clock signal for
Camera and HWA.
Common with
compass
TXDA 1.8V Control data for
HWA
VANA_EXT AVDD 2.72V 2.80V 2.88V V I
max
= 16mA