User Guide

Nokia Customer Care

NPL-4/5

Exchange of System Connector

(PICTURE EXAMPLES TAKEN FROM Nokia 5100, NPM-6)

The System Connector is attached with double-sided

adhesive gasket to C-Cover. Also note the gasket on

C-Cover.

Press SRT-6 between C-Cover and System Connector and

remove Battery Cover.

Press again SRT-6 between C-Cover and System Connector

and remove System Connector.

Remove System Connector.

To remove the remaining adhesive gasket use SRT-6 only.

Do not use sharp-edged tools for this procedure.

Remove protection foil from System Connector.