User Guide

NPL-4/5
Disassembly Instructions Nokia Customer Care
Page 4 Copyright © 2004 Nokia Copyright. All rights reserved Issue 1 05/04
Separate the UI-Module from Engine Module carefully,
because of the board-to board-connector.
Push out the LCD by using a clean cloth.
Protect LCD with a film. Remove the Speaker with Kirk Boot. Note the guiding
when assembling.
Use tweezers to remove Speaker from Kirk Boot. Use a slotted screwdriver as a lever to open the Camera
Shield.
Camera Module is attached with four snaps into its
guidance. Place SRT-10 as shown in the picture and unlock
the snaps on both sides. Note releasing order.
Use tweezers to take away the Camera module.