User Guide

CCS Technical Documentation

Select “Load from: Permanent memory” => “OK “ to start tuning with values already

saved to the phone.

Note that the TX PA mode is “High” at this point

The coefficient table lists the power level, coefficient, target dBm and DAC value for each

power level.

The tuned power level can be chosen by using up and down arrows or mouse.

The current power level is shown with inverse colors.

The tuning value can be adjusted with “-“ and “+” keys

Tune base level

and power levels 19,15 and 5 to target level .

Press "Calculate coefficients".

Change TxPA Mode to “Low“ from the drop down menu. When the PA Mode is changed,