User Guide

CCS Technical Documentation

RX Band Filter Response Compensation

RF generator needed.

This operation must be done separately on each band

Start RX Calibration at EGSM900, then continue at GSM1800 band and finally on the

GSM1900 band

NOTE! Remember to do RX calibration before doing Rx Band Filter Response Compensa-

tion!

Remember to take jig and cable attenuations into account!

Select Maintenance => Tuning => Rx band filter response compensation

Select “Yes” to start tuning with values already saved to the phone

Set RF to 923.26771MHz level –80dBm.