User Guide

CCS Technical Documentation Disassembly and Assembly Instructions
NPM-6/6X
Issue 2 06/03 CopyrightNokia. All rights reserved Page 5
Exchange of system connector
The System Connector is attached with double-sided
adhesive gasket to C-Cover. Also note the gasket on C-
Cover.
Press SRT-6 between C-Cover and System Connector and
remove Battery Cover.
Press again SRT-6 between C-Cover and System Connector
and remove System Connector.
Remove System Connector.
To remove the remaining adhesive gasket use SRT-6 only.
Do not use sharp-edged tools for this procedure.
Remove protection foil from System Connector.