User Guide

CCS Technical Documentation Service tools

NPM-6/6X

MJS-49 Module Test Jig

Module Testg Jig MJS-49 is designed for regional Central Services for TB4 module test-

ing. It can be used for flashing and RF-, battery-, system-, radio- and SIM reader testing.

Product Code

MJS-49 Module Test Jig: 0770461

Figure 2: View of MJS-49

Note: The nominal supply voltage for MJS-49 is +4.2 V.

The supply voltage must not exceed +12.0 V (min 3V).

(MJS-49 includes overvoltage, overcurrent and reversed polarity protection).

For flashing with FPS-8, it is possible to bypass the regulator

(jumper).