User Guide

ManualsBrandsNokia ManualsCell Phone5100

Customer Care Solutions

NPM-6/6X Series Transceivers

Service tools

Summary of content (24 pages)

PAGE 1
Customer Care Solutions NPM-6/6X Series Transceivers Service tools Issue 2 06/03 CopyrightNokia.
PAGE 2
NPM-6/6X Service tools CCS Technical Documentation [This page left intentionally blank] Page 2 Copyright Nokia.
PAGE 3
CCS Technical Documentation NPM-6/6X Service tools Table of Contents Page No JBV-1 Docking Station and MJF-27 Adapter................................................................ 5 Product Code ...............................................................................................................5 MJS-49 Module Test Jig ................................................................................................ 7 Product Code .................................................................
PAGE 4
NPM-6/6X Service tools CCS Technical Documentation Fig 7 View of ACF-8 ...........................................................................................................12 Fig 8 View of FLA-42 .........................................................................................................13 Fig 9 View of FLC-2 ...........................................................................................................14 Fig 10 View of AXS-4..................................................
PAGE 5
NPM-6/6X Service tools CCS Technical Documentation JBV-1 Docking Station and MJF-27 Adapter The JBV-1 Docking Station has been designed for calibration and software update use. The MJF-27 Docking Station Adapter makes signal connections to the phone. JBV-1 and MJF-27 are used as one unit.
PAGE 6
NPM-6/6X Service tools CCS Technical Documentation Figure 1: View of MJF-27 Page 6 Copyright Nokia.
PAGE 7
NPM-6/6X Service tools CCS Technical Documentation MJS-49 Module Test Jig Module Testg Jig MJS-49 is designed for regional Central Services for TB4 module testing. It can be used for flashing and RF-, battery-, system-, radio- and SIM reader testing. Product Code MJS-49 Module Test Jig: 0770461 Figure 2: View of MJS-49 Note: The nominal supply voltage for MJS-49 is +4.2 V. The supply voltage must not exceed +12.0 V (min 3V). (MJS-49 includes overvoltage, overcurrent and reversed polarity protection).
PAGE 8
NPM-6/6X Service tools CCS Technical Documentation MJS-72 Soldering Jig MJS-72 Soldering Jig is used for soldering and as a rework jig for AK4 module. Product Code MJS-72 Module Jig: 0775325 Figure 3: View of MJS-72 Page 8 Copyright Nokia.
PAGE 9
NPM-6/6X Service tools CCS Technical Documentation SES-3 Rework Stencil Rework Stencil is used for PA Chip N700 (LGA type component) rework. It is used together with Rework Jig MJS-76 and SPS-1 Soldering Paste Spreader. The tools needed for rework include: MJS-76 Rework Jig: 0770417 SES-3 Stencil: 0770558 SPS-1 Soldering Paste Spreader: 0770381 Issue 2 06/03 CopyrightNokia.
PAGE 10
NPM-6/6X Service tools CCS Technical Documentation FPS-8 Flash Prommer (Sales Pack) The Flash Prommer FPS-8 is used with e.g. MJF-27 and JBV-1. Power is supplied to FPS-8 from the Universal Power Supply. The sales pack includes: - FPS-8 Flash Prommer 0750123 - FPS-8 Activation Sheet 9359289 - Universal Power Supply 0680032 - AXS-4 Service Cable (D9-D9)0730090 - Printer cable 0730029 Sales package code FPS-8 Flash Prommer: 0080321 Figure 4: View of FPS-8 View of FPS-8 Page 10 Copyright Nokia.
PAGE 11
NPM-6/6X Service tools CCS Technical Documentation FPS-8C Parallel Flash Prommer (Sales Pack) The Parallel Flash Prommer FPS-8C is used with MJF-27 and JBV-1. Flash programming can be done to maximum of 8 phones parallel. FPS-8C consists of eight SF11C programming cards. SF11C card is func tionally identical to FPS-8. Sales package code FPS-8C Parallel Flash Prommer: 0080396 Figure 5: View of FPS-8C Issue 2 06/03 CopyrightNokia.
PAGE 12
NPM-6/6X Service tools CCS Technical Documentation ACF-8 Universal Power Supply ACF-8 Universal Power Supply is used to power FPS-8. ACF-8 has 6 V DC and 2.1 A output. Product Code ACF-8 Universal Power Supply: 0680032 Figure 6: View of ACF-8 CF-8 Page 12 Copyright Nokia.
PAGE 13
NPM-6/6X Service tools CCS Technical Documentation FLA-42 POS (Point of sales) Flash Loading Adapter FLA-42 POS Flash Loading Adapter is used in place of the phone's normal battery during service, to supply a controlled operating voltage. Product Code FLA-42 POS Flash Loading Adapter: 0770459 Figure 7: View of FLA-42 Issue 2 06/03 CopyrightNokia.
PAGE 14
NPM-6/6X Service tools CCS Technical Documentation FLC-2 DC Cable The FLC-2 is used to supply a controlled operating voltage. Product Code FLC-2 DC Cable: 0730185 Figure 8: View of FLC-2 C-2 Page 14 Copyright Nokia.
PAGE 15
NPM-6/6X Service tools CCS Technical Documentation AXS-4 Service Cable The AXS-4 D9-D9 Service Cable is used to connect two 9 pin D connec tors e.g. between PC and FPS-8. Cable length is 2 meters. Product code AXS-4 D9-D9 Service Cable: 0730090 Figure 9: View of AXS-4 Issue 2 06/03 CopyrightNokia.
PAGE 16
NPM-6/6X Service tools CCS Technical Documentation XCS-1 Service Cable The XCS-1 Service Cable is used to connect FLS-4 to FLA-42. Product code XCS-1 Service Cable: 0730218 Figure 10: View of XCS-1 S-1 Page 16 Copyright Nokia.
PAGE 17
NPM-6/6X Service tools CCS Technical Documentation PKD-1 SW Security Device SW security device is a piece of hardware enabling the use of the service software when connected to the parallel (LPT) port of the PC. Whithout the dongle present it is not possible to use the service software. Printer or any such device can be connected to the PC through the dongle if need ed.
PAGE 18
NPM-6/6X Service tools CCS Technical Documentation FLS-4S POS (Point of sales) Flash Device (Sales Pack) FLS-4S is a dongle and flash device incorporated into one package, developed specifically for POS use. Product Code Sales Pack - Europe/Africa 0080541 Sales Pack -APAC 0080542 Figure 12: View of FLS-4S Page 18 Copyright Nokia.
PAGE 19
NPM-6/6X Service tools CCS Technical Documentation PCS-1 Power Cable The PCS-1 Power Cable (DC) is used to connect e.g. JBV-1 to FPS-8. Product Code PCS-1 Power Cable: 0730012 Figure 13: View of PCS-1 of PCS-1 Issue 2 06/03 CopyrightNokia.
PAGE 20
NPM-6/6X Service tools CCS Technical Documentation XRF-1 RF Cable RF cable XRF-1 is used to connect e.g. Module Jig MJS-39 to RF mea surement equipment.. Product code XRF-1 RF Cable: 0730085 Figure 14: View of XRF-1 Page 20 Copyright Nokia.
PAGE 21
NPM-6/6X Service tools CCS Technical Documentation DAU-9S MBUS Cable The MBUS Cable DAU-9S has a modular connector, and is used with be tween PC's serial port and e.g. Module Jig MJS-39. Product Code DAU-9S MBUS Cable: 0730108 Figure 15: View of DAU-9S Issue 2 06/03 CopyrightNokia.
PAGE 22
NPM-6/6X Service tools CCS Technical Documentation SCB-3 DC Cable The DC Cable SCB-3 is used to connect e.g. JBV-1 to the phone. Product Code SCB-3 DC Cable: 0730114 Figure 16: View of SCB-3 B-3 Page 22 Copyright Nokia.
PAGE 23
NPM-6/6X Service tools CCS Technical Documentation XCS-4 Modular Cable XCS-4 is a shielded cable (one specially shielded conductor) modular cable for flashing and service purposes. Product code XCS-4 Modular Cable: 0730178 Figure 17: View of XCS-4 Issue 2 06/03 CopyrightNokia.
PAGE 24
NPM-6/6X Service tools CCS Technical Documentation Printer Cable This cable is used to connect the PC to FPS-8. Product code Printer Cable: w of Printer Cable Page 24 0730029 Figure 18: View of Printer Cable Copyright Nokia.