User Guide
Table Of Contents
- Amendment Record Sheet
- Copyright
- Warnings and cautions
- For your safety
- Care and maintenance
- ESD protection
- Battery information
- Company Policy
- Nokia 5000 Service Manual Structure
- 1 General Information
- 2 Service Devices and Service Concepts
- 3 Baseband Troubleshooting Instructions
- General baseband troubleshooting
- SIM related faults
- User interface
- Audio troubleshooting
- Audio troubleshooting using phoenix
- Check microphone using "Hp microphone in Ext speaker out" loop
- Check earpiece using "Ext microphone in Hp speaker out" loop
- Check IHF & ringing tone function using "Buzzer"
- Check vibra function using "Vibra control"
- Earpiece fault
- IHF/ringing tone fault
- Microphone fault
- Headset earpiece fault
- Headset microphone fault
- 4 RF Troubleshooting Instructions
- 5 Camera Module Troubleshooting
- 6 System Module
- Glossary
SA-93 RF coupler
The coupler is used for Go/No-Go test after changing components in
the RF part of the phone.
It is mounted on the docking station adapter.
The following table shows attenuations from the antenna pads of the
mobile terminal to the SMA connectors of SA-93:
•
Band Tuning
channel
Attenuation RX
(dB)
Attenuation
TX(dB)
GSM850 128 6 6
190 7 6
251 7 6
GSM900 38 11 7
124 13 7
975 10 8
GSM1800 512 7 7
700 6 7
885 6 7
GSM1900 512 6 6
661 7 6
810 9 6
SRT-6 Opening tool
SRT-6 is used to open phone covers and B-to-B connectors.
Caution: Handle the tool with care because the tip is only 0.7
mm in diameter.
When not in use, store in a safe location.
SS-88 Camera removal tool
The camera removal tool SS-88 is used to remove/attach the front
camera module from/to the socket.
SS-93 Opening tool
SS-93 is used for opening JAE connectors.
RM-362; RM-363
Service Devices and Service Concepts
Issue 1 COMPANY CONFIDENTIAL Page 2 –11
Copyright © 2008 Nokia. All rights reserved.