Nokia 500 Auto Navigation Getting Started Guide 9205371 Issue 3 EN
DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this PD-14 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/ 5/EC. The product is in conformity with the limits defined in Directive 2004/104/EC (amending Directive 72/245/EEC), Annex I, paragraph 6.5, 6.6, 6.8 and 6.9. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/ declaration_of_conformity/.
■ Keys and parts 1 2 3 4 5 9 10 6 7 11 12 8 13 1. Cover of connector for an optional external GPS antenna 2. Power key 3. Cover of stereo audio-out connector 4. Indicator light 5. Touch screen 6. Volume down key 7. Menu key 8. Volume up key 9. Memory card with adapter 10.Memory card slot 11.Main power switch 12.Mini USB port/charger connector 13.
■ First use 1. To switch on the device, slide the main power switch to the right. In daily use, use the standby mode instead of switching the device off. This way the device starts up faster. To set the device to (or to exit) the standby mode, press and hold the power key for about 3 seconds. 2. When you are asked to calibrate the screen, tap and briefly press the displayed crosshair with your finger. Repeat this as the crosshair moves around the screen. 3.
■ Install the device in a car 2 3 5 4 1 6 Attach the mobile holder to the mounting device using the supplied screw (1), and snap the protection plate into place. To attach the mounting device to the windscreen, carefully push the locking lever toward the cup (2). Insert the navigation device into the mobile holder (3), and press the device backwards so that the two arms of the holder lock the device in place (4). (To release the device, push the arms.
Important: Avoid scratching the touch screen. Never use a pen or pencil or other sharp objects to write on the touch screen. Open applications from map screen When you switch on the device, the map screen is displayed. This screen shows the map view of the Navigator application. To show or hide the application menu, press the menu key. To open an application from the menu, tap its icon.
Navigation mode When you are navigating to a destination, Navigator is in the navigation mode. In this mode, the map shows, for example, the route to the destination, current street, next street (and distance to it), speed, estimated time of arrival, distance to the destination, and average speed (if this function is set to on). To browse the map, tap it to go to the browsing mode. To stop the navigation, tap . To access the functions available during navigation, tap .
You can also navigate to a recently visited location (Recent), a previously saved location (Favourites), or an address saved with a name in your phonebook if it contains addresses (Contacts). After you have set up the destination, tap and Navigate. The device calculates the route to the destination and enters the navigation mode. Navigate to an address To search for an address to which you want to navigate, press the menu key, and tap Navigator > Destination > Address.
route, tap +, and select the location in the same way as a destination. To delete a stopover from the trip, tap the stopover on the list and . After you have set up the route, tap and Routing. After the route has been calculated, a route summary is displayed. To view a detailed waylist, tap the right arrow. To view the waypoints on the map, tap the right arrow again. To move to the previous or next waypoint, tap the arrow at the left or right side of the waypoint name.
To change the way contacts are sorted, or to download contacts from the currently connected mobile phone, press the menu key, and tap Phone > Settings > Sort order of contacts or Contacts download. Other calling methods To make a call, you can also use other dialling methods. Press the menu key, tap Phone, and proceed in one of the following ways: • To enter the phone number, tap Dial pad, and key in the number. To call the number, tap . To end the call, tap .
