Users Manual Part 2

Management using the Web UI
136
Nokia FastMile 4G Receiver Product Overview
3TG-01505-AAAB-TCZZA Issue: 01
14.2 Using the Web UI status screen
The Web UI status screen allows you to view FastMile 4G Receiver status
parameters. No login is required.
The following parameters are shown:
• The Cell ID for primary attached cell
• The primary attached cell physical cell ID (PCI), eNodeB ID (eNBID), DL EARFCN
and the Band
• The secondary attached cells physical cell ID (PCI) and DL EARFCN
• Secondary Component Carrier Band (Downlink)
• Secondary Component Carrier Band (Uplink)
• The Signal Strength of the attached cell: this animated model shows the RSRP
(Reference Signals Received Power) of the attached cell
• The RSRP (Reference Signals Received Power) of the attached primary and
secondary cells
• The RSRQ (Reference Signal Received Quality) of the attached primary and
secondary cells
• The RSSI (Received Signal Strength Indication) of the attached primary and
secondary cells
• The CINR (Carrier to Interference plus Noise Ratio) of the attached primary and
secondary cells
• The SINR (Signal to Interference and Noise Ratio) of the attached primary cell
• Total number of MB sent on the LTE interface since last FastMile 4G Receiver
restart
• Total number of MB received on the LTE interface since last FastMile 4G
Receiver restart
• Total number of MB sent on the Ethernet interface since last FastMile 4G
Receiver restart
• Total number of MB received on the Ethernet interface since last FastMile 4G
Receiver restart
• Data Model (TR-069)
• Software Version
• Name retrieved from network and the corresponding IP address of the configured
Access Points
• Device Info table with information regarding the IMSI, IMEI, Ethernet MAC
Address, Serial Number and the Model Name