Users Manual Part 2

Nokia FastMile 4G Receiver Product Overview Management using the Web UI
Issue: 01 3TG-01505-AAAB-TCZZA 135
14 Management using the Web UI
14.1 Using the Web UI to manage the Nokia FastMile 4G Receiver
14.2 Using the Web UI status screen
14.3 Using the Web UI network screen
14.4 Using the Web UI CBRS screen
14.5 Using the Web UI system screen
14.1 Using the Web UI to manage the Nokia
FastMile 4G Receiver
After the Nokia FastMile 4G Receiver has been installed, you can use the Web UI to
perform some management-type activities on a Nokia FastMile 4G Receiver that is
managed by an ACS through TR-069. See section 6.1.2 for more information about
the Web UI.
The Web UI provides the following screens to provide support for management of the
Nokia FastMile 4G Receiver:
• Status screen: allows viewing of FastMile 4G Receiver status parameter values
(login is not required), see section 14.2
• Network screen: allows configuration of specific FastMile 4G Receiver
parameters (login is required), see section 14.3
• CBRS screen: offers the possibility to display CBSD parameters of the FastMile
4G Receiver, as well as to input registration information for CPI's usage (login is
required), see section 14.4
• System screen: allows performing of advanced system actions (login is required),
see section 14.5
Note — Most of the screens require login. See the Customer
Release Notes for Web UI considerations and limitations,
including username information for the types of accounts
supported by the Web UI.
Default passwords for the accounts will be delivered during
commissioning. The default passwords can be set in
pre-configuration file (either customers provide it or use default
ones from Nokia).
The Web UI passwords can be managed later on through the
ACS.