Users Manual Part 2

Nokia FastMile 4G Receiver Product Overview Management using the Web UI
Issue: 01 3TG-01505-AAAB-TCZZA 153
The following advanced system capabilities are supported:
• Restart device: the FastMile 4G Receiver configuration remains intact
• Restore factory settings: factory configuration of the FastMile 4G Receiver is
used; subsequent configuration is lost
• Upgrade firmware:
• before doing any firmware upgrade action, make sure that the upgrade path from the
existing firmware to new firmware is supported by the FastMile 4G Receiver
• new image is installed in the FastMile 4G Receiver; the FastMile 4G Receiver
configuration remains intact
• note that the FastMile 4G Receiver will reboot if the firmware upgrade fails
• Enable/disable LAN SSH access (by default LAN SSH access is enabled)
• Enable/disable WAN SSH access (by default WAN SSH access is disabled)
Figure 87 shows an example of the System screen.
Figure 87 Example of the System screen
Figure 88 shows an example of the Restart Device confirmation window.