Users Manual Part 2

Management using the Web UI
142
Nokia FastMile 4G Receiver Product Overview
3TG-01505-AAAB-TCZZA Issue: 01
14.3 Using the Web UI network screen
The Web UI network screen allows you to perform FastMile4G Receiver
configuration actions. Login is required. For details on the Web UI login, please refer
to the Customer Release Notes.
The following configuration capabilities are supported:
• Configuration of ACS URL
• Configuration of ACS username
• Configuration of ACS password
• Configuration of Connection Request Port
• Configuration of Connection Request Username
• Configuration of Connection Request Password
• Configuration of Periodic Inform Interval
• Configuration of Periodic Inform Request
• Setting of location; that is, geocoordinates (latitude and longitude)
• Configuration of Access Points (up to one default AP in router mode and up to four
APs in bridge mode; a total of five APs can be configured). AP configuration
includes configuration of:
• AP name (If the default AP name is set to EmptyAPN, the auto APN feature is
enabled)
• forwarding mode (router or bridge)
• Username
• Password
• Authentication mode
• VLAN
• MTU size
• subnet mask
• Note that the default AP cannot be deleted
• Configuration of cell list (up to nine cells can be configured)
• Configuration of the DHCP server for router mode
• Uploading of CA certificates
The following CA certificates are supported:
• logserverCA.pem (used for authenticating the log server)
• swserverCA.pem (used for authenticating the software upgrade server)
Note — CA certificates must be pre-downloaded to the laptop
so that they can be browsed and found via the 'Upload
Certificate' action. The CA Certificates must comply to the
naming rules required by the FastMile 4G Receiver.