Users Manual Part 1

LEDs
68
Nokia FastMile 4G Receiver Product Overview
3TG-01505-AAAB-TCZZA Issue: 01
The signal strength LEDs can be activated by pressing the measurement button on
the side of the Compact multi-band models of the Nokia FastMile 4G Receiver.
Figure 23 shows the location of the measurement button.
Figure 23 Location of the measurement button on the Compact multi-band
models
The signal strength LEDs act as a set to indicate the LTE signal strength detected by
the Nokia FastMile 4G Receiver. For example, if the signal strength is fourth level,
then LEDs 1, 2, 3, and 4 are lit. Table 12 lists the threshold values for the signal
strength LEDs, but note that the threshold values can be changed through an ACS.
Table 12 Signal strength LED threshold values
Number of lit LEDs Threshold
None <-110dBm
One -110 to -106 dBm
Two -105 to -101dBm
Three -100 to -96dBm
Four -95 to -91dBm
Five >=-90dBm
Measurement button
28885