Users Manual Part 1

Nokia FastMile 4G Receiver Product Overview Model overview
Issue: 01 3TG-01505-AAAB-TCZZA 49
7 Model overview
7.1 Models of the Nokia FastMile 4G Receiver
7.1 Models of the Nokia FastMile 4G Receiver
A wide range of models are available for the Nokia FastMile 4G Receiver to support
different E-UTRA bands and band combinations for LTE, including the capability to
limit the bands to be used among the bands physically supported, to support network
resource planning, and to speed up the cell attach speed.
All models can be wall-mounted or pole-mounted. If you will be mounting the Nokia
FastMile 4G Receiver on a pole, you will need kit 3TG-00291-AA that contains the
pole adapter for the Nokia FastMile 4G Receiver. Note that pole strapping and wall
fasteners are not provided by Nokia.
Table 5 describes the E-UTRA band and frequency support and the antenna
configurations and model type for each model of the Nokia FastMile 4G Receiver.
Table 5 Models of the Nokia FastMile 4G Receiver
Model E-UTRA band support and frequencies Antenna configuration Model type
4G01-A
• Band 42: TDD, 3400 MHz – 3600 MHz
• Band 43: TDD, 3600 MHz – 3800 MHz
• Band 48: TDD, 3550 MHz – 3700 MHz
Integrated with 15 dBi fixed beamforming
antenna
Compact
mono-band
Two types: one with
3m attached
Ethernet cable and
one with 20m
attached Ethernet
cable with
CPE-CBSD (Cat.B)
certificate
4G01-B
• Band 42: TDD, 3400 MHz – 3600 MHz
• Band 43: TDD, 3600 MHz – 3800 MHz
• Band 48
(1)
: TDD, 3550 MHz – 3700 MHz
Integrated with 3x4 dual polarized antenna
array, electronic beam steering +/- 45°
horizontally, and up to 17 dBi peak antenna gain
with beam steering
ABA
4G01-C
• Band 48: TDD, 3550 MHz - 3700 MHz Integrated with 19 dBi fixed beamforming
antenna
High gain CBRS
(CPE-CBSD
(Cat.B) certified)
4G02-A
• Band 3: FDD, Tx 1710 MHz – 1785 MHz,
Rx 1805 MHz – 1880 MHz
Integrated with 10.5 dBi fixed beamforming
antenna
Compact
mono-band
(1 of 3)