User Guide

[ 74 ]
5
2 To take a picture, press .
Note: Do not move the phone before the Camera application starts to
save the photo. The photos are saved automatically in the Images
application.
After the image has been saved:
• If you do not want to save the photo in the Images select
Options→ Delete.
• To return to the viewfinder to take a new picture, press .
Options after a picture has been taken are: New image, Send, Rename
image, Go to Images, Settings, Help, and Exit.
Note: The Camera goes into battery saving mode within a minute if there
have been no key presses. To continue taking pictures, press .
Settings
In the Camera application settings, you can adjust the image quality
setting and change the default image name.
Example: If you set ‘Beach’ as the default image name, Camera will name
all the pictures you take ‘Beach’, ‘Beach(01)’, ‘Beach(02)’, and so on, until
you change the setting again.
1 Select Options→ Settings.
2 Scroll to the setting you want to change:
• Image quality - High, Normal, and Basic. The better the image
quality, the more memory the image consumes. See also “Images
and memory consumption” on page 76.
• Default image name - By default, Camera names photos in the
format ‘Image.jpg’. Default image name allows you to set a name
for the pictures taken.
•
Memory in use - Select whether you want to store your images in the
phone memory or the memory card, if you use one.