User Guide

[ 61 ]
each time when you connect a certain accessory to your phone. See
“Profiles” on page 121.
•Select Automatic answer to set the phone to answer an incoming call
automatically after five seconds time. If the Incoming call alert is set
to Beep once or Silent, automatic answer cannot be in use.
Note: If you are using a loopset, you need to activate it separately. Open
the Loopset folder and select Use loopset→ Yes. If you have
activated a loopset, the headset will use the same settings as the
loopset.
Indicators shown in standby mode:
- a headset is connected.
- a loopset is connected.