User Guide

[ 56 ]

You can change the following codes: lock code, PIN code, and PIN2 code.

These codes can only include the numbers from 0 to 9.

Note: Avoid using access codes similar to the emergency numbers, such

as 911, to prevent accidental dialing of the emergency number.

PIN code request - When the PIN code request is active, the code is

requested each time the phone is switched on. Note that deactivating the

PIN code request may not be allowed by some SIM cards.

PIN code / PIN2 code / Lock code - Open this setting if you want to change

the code.

Tip: To lock the phone manually, press . A list of commands opens.

Select Lock phone.

Autolock period - You can set an autolock period, a time-out after which

the phone is automatically locked and can be used only if the correct lock

code is entered. Key in a number for the time-out in minutes or select

None to turn off the autolock period.

To unlock the phone, key in the lock code.

Note: When the phone is locked, calls may be possible to the emergency

number programed into your phone (e.g. 911 or other official

emergency number).

Lock if SIM changed - Select Yes if you want the phone to ask for the lock

code when an unknown, new SIM card is inserted into your phone. The

phone maintains a list of SIM cards that are recognized as the owner’s

cards.

Fixed dialing - You can restrict your outgoing calls to selected phone

numbers, if supported by your SIM card. You need the PIN2 code for this

function. When this function is active, you can only call those phone

numbers that are included in the fixed dialing list or which begin with the

same digit(s) as a phone number on the list.

To view the list of Fixed dialing numbers, go to Menu→ SIM→ Fixed

dialing.