User Guide

[ 50 ]

changes and press Back to save the settings.

• Use existing settings to use existing setting information as the basis for

the new access point settings. A list of existing access points is

opened. Select one and press OK. Access point settings are opened

with some fields already filled.

Edit an access point

When you open Access points, the list of already available access points

opens. Scroll to the access point you want to edit, and press

Delete an access point

In the list of access points, scroll to the access point you want to remove

and select Options→ Delete.

Access points

Options when editing access point settings are: Change, Advanced

settings, Help, and Exit.

Here you can see a short explanation for every setting that may be needed

for different data connections and access points.

Note: Start to fill in the settings from the top because depending on

what data connection you select (Data bearer) or whether you

need to insert a Gateway IP address, only certain setting fields are

available.

Note: Follow the instructions given to you by your service provider very

carefully.

• Connection name - Give a descriptive name for the connection.

• Data bearer - The options are GSM data, High speed GSM, and GPRS.

Depending on what data connection you select, only certain setting

fields are available. Fill in all fields marked with Must be defined.

Other fields can be left empty, unless you have been instructed

otherwise by your service provider.