User Guide

[ 46 ]

Send my caller ID

This network service allows you to set your phone number to be displayed

(Yes) or hidden (No) from the person to whom you are calling. Or, the value

may be set by your service provider when you make a subscription (Set by

network).

Call waiting: (network service)

The network will notify you of a new incoming call while you have a call

in progress. Select: Activate to request the network to activate call

waiting, Cancel to request the network to deactivate call waiting,

or Check status, to check if the function is active or not.

Automatic redial

When this setting is activated, your phone will make a maximum of ten

attempts to connect the call after an unsuccessful call attempt.

Press to stop automatic redialing.

Summary after call

Activate this setting if you want the phone to briefly display the duration

and cost of the last call. To show costs, the Call cost limit needs to be

activated for your SIM card. See p. 38.

Speed dialing

Select On and the numbers assigned to the speed dialing keys ( - ),

can be dialed by pressing and holding the key. See also “Assigning speed

dialing keys” on page 70.

Anykey answer

Select On, and you can answer an incoming call by briefly pressing any

key, except , , and .

Line in use (network service)

This setting is shown only if the SIM card supports two subscriber

numbers, that is, two phone lines. Select which phone line (Line 1 or Line

2) you want to use for making calls and sending short messages. Calls on

both lines can be answered irrespective of the selected line.